Schurter C20F Iec appliance inlet c20 with filter, front or rear side mounting Datasheet

C20F
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
IEC Appliance Inlet C20 with Filter, Front or Rear Side Mounting
Screw-on mounting
from front side
Snap-in mounting
from front side
Screw-on mounting
from rear side
with wires (stranded)
C20
See below:
Approvals and Compliances
70° C
Description
- Panel Mount :
Screw-on version from front or rear side, snap-in version from front
side
- 2 Functions :
Appliance Inlet Protection class I , Line filter in standard and medical
version
- Solder, quick connect or wires (stranded)
Unique Selling Proposition
-
Attractive flat front design
Highly resistant since fully potted
Various filter variants
V-Lock cord retaining
Characteristics
- Compact design with optimal shielding
Suitable for assembly in metal plated plastic housings
- Version with class X1 and X2 (standard version) capacitors
- Universal line filter for standard applications
- Suitable for use in equipment according to IEC/UL 60950
Suitable for use in medical equipment according to IEC/UL 60601-1
Other versions on request
- 16A according to UL
- Capacity CX 330 nF
References
Alternative: version without line filter 4793; 4798
Weblinks
pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Microsite
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC
Ratings UL/CSA
Leakage Current
Dielectric Strength
Impulse Withstand Voltage
Allowable Operation Temperature
Climatic Category
IP-Protection
Protection Class
Terminal
Panel Thickness S
Material: Housing
16 A @ Ta 40 °C / 250 VAC; 50 Hz
20 A @ Ta 40 °C / 250 VAC; 60 Hz
standard < 0.5 mA (250 V / 60 Hz)
medical < 5 µA (250 V / 60 Hz)
> 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)
> 2.5 kV between L-N (CX2)
> 4 kV between L-N (CX1)
> 5 kV between L/N-PE (Cy2)
voltage (1.2/50 μs)
-25 °C to 85 °C
appliance inlet/-outlet
Line Filter
MTBF
C20 acc. to IEC 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 16 A,
Protection Class I
Standard and Medical Version, IEC
60939, UL 1283, CSA C22.2 no. 8
Technical Details
> 3'000'000 h acc. to MIL-HB-217 F
25/085/21 acc. to IEC 60068-1
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Solder, quick connect or wires (stranded)
Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1 mm to 3 mm
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
EMC Products
1
C20F
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: C20F
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
VDE Certificate Number: 104884
UL Approvals
UL
UL File Number: E72928
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
IEC 60939
Passive filters for suppressing electromagnetic interference
Designed according to
IEC 61058-1
Switches for appliances. Part 1. General requirements
Designed according to
UL 498
Standard for Attachment Plugs and Receptacles
Designed according to
UL 1283
Electromagnetic interference filters
Designed according to
CSA C22.2 no. 42
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Designed according to
CSA C22.2 no. 8
Electromagnetic interference (EMI) filters
Design
Standard
Description
Designed for applications acc.
IEC/UL 60950
IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Designed for applications acc.
IEC 60601-1
Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS
SCHURTER AG
EU Directive RoHS 2011/65/EU
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
MicrositeV-Lock
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
Medical Equipment
SCHURTER AG
Suitable for use in medical equipment according to IEC/UL 60601-1
Product standards
Product standards that are referenced
Organization
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
2
EMC Products
C20F
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Dimensions [mm]
Screw-on mounting from front side
10.7
R6
6.3 x 0.8 *
3.5/M3
64.65
30
42 ±0.15
34.8 +0.20
0
ø 6.3x95°
33.90
x 25.90
53
42
3.5
9.4
R3
3.85
26.8
+0.20
0
79.2
* Solder terminal: identical outer dimensions
Screw-on mounting from rear side with metal flange
10.7
R6
6.3 x 0.8 *
3
3.5
max. R 0.5
M3
28
64.65
30
79.2
42 ±0.15
33.90
x 25.90
53
36
42
R 0.5
36.4 +0.20
0
9.4
3.85
28.3
+0.20
0
Snap-in mounting from front side
10.7
33.90
x 25.85
38
30
34.8 +0.20
0
9.4
R2
64.65
R3
3.85
26.3
+0.20
0
79.2
EMC Products
3
C20F
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Screw-on mounting from front side with flexible wire
7
±2
150
+10
0
Technical Data of Filter-Components
Rated Current
[A]
16
Filter-Type
Inductances
L [mH]
Capacitance
CX [nF]
Capacitance
CY [nF]
R [MΩ]
2 x 0.3
100
2.2
1
Standard Version
16
Medical Version (M5)
2 x 0.3
100
-
1
16
Medical Version (M80)
2 x 0.3
100
0.47
1
Diagrams
Standard or medical version (M80)
Medical version (M5)
L
L’
L
L’
L1
1) PE
N
Cx
L1
Cy
R
L2
Cy
1) Line
2) Load
N’
1) PE
N
Cx
PE’ 2)
R
L2
N’
1) Line
2) Load
Attenuation Loss
- - - - 50Ω differential mode _____ 50Ω common mode
Standard version
20 A
4
PE’ 2)
EMC Products
C20F
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Medical version (M5)
20 A
All Variants
Rated Current
IEC
Rated Current Filter-Type
UL
Panel mounting
Mounting side
Terminal
Capacitor
V-Lock
Order Number
16
20
Standard Version
Snap-in
Front Side
Quick connect terminals 6.3 x 0.8
mm
X2 100nF
C20F.0111
16
20
Standard Version
Snap-in
Front Side
Quick connect terminals 6.3 x 0.8
mm
X1 100nF
C20F.0113
16
20
Standard Version
Snap-in
Front Side
Solder terminals
X2 100nF
C20F.0011
16
20
Standard Version
Snap-in
Front Side
Solder terminals
X1 100nF
C20F.0013
16
20
Standard Version
Screw
Front Side
Quick connect terminals 6.3 x 0.8
mm
X2 100nF
C20F.0101
16
20
Standard Version
Screw
Front Side
Quick connect terminals 6.3 x 0.8
mm
X2 100nF
16
20
Standard Version
Screw
Front Side
Quick connect terminals 6.3 x 0.8
mm
X1 100nF
l
█
█
C20F.0101.21
C20F.0103
16
20
Standard Version
Screw
Front Side
Solder terminals
X2 100nF
16
20
Standard Version
Screw
Front Side
Solder terminals
X2 100nF
16
20
Standard Version
Screw
Front Side
Solder terminals
X1 100nF
C20F.0003
16
20
Standard Version
Screw
Rear Side
Flexible wire AWG14
X2 100nF
C20F.0221
C20F.0001
l
█
C20F.0001.21
16
20
Standard Version
Screw
Rear Side
Flexible wire AWG14
X1 100nF
C20F.0223
16
20
Standard Version
Screw
Rear Side
Quick connect terminals 6.3 x 0.8
mm
X2 100nF
C20F.0121
16
20
Standard Version
Screw
Rear Side
Quick connect terminals 6.3 x 0.8
mm
X1 100nF
C20F.0123
16
20
Standard Version
Screw
Rear Side
Solder terminals
X2 100nF
C20F.0021
16
20
Standard Version
Screw
Rear Side
Solder terminals
X1 100nF
C20F.0023
16
20
Medical Version (M5)
Snap-in
Front Side
Quick connect terminals 6.3 x 0.8
mm
X2 100nF
C20F.0112
16
20
Medical Version (M5)
Snap-in
Front Side
Quick connect terminals 6.3 x 0.8
mm
X1 100nF
C20F.0114
16
20
Medical Version (M5)
Snap-in
Front Side
Solder terminals
X2 100nF
C20F.0012
16
20
Medical Version (M5)
Snap-in
Front Side
Solder terminals
X1 100nF
C20F.0014
16
20
Medical Version (M5)
Screw
Front Side
Quick connect terminals 6.3 x 0.8
mm
X2 100nF
C20F.0102
16
20
Medical Version (M5)
Screw
Front Side
Quick connect terminals 6.3 x 0.8
mm
X1 100nF
C20F.0104
16
20
Medical Version (M5)
Screw
Front Side
Solder terminals
X2 100nF
C20F.0002
16
20
Medical Version (M5)
Screw
Front Side
Solder terminals
X1 100nF
C20F.0004
16
20
Medical Version (M5)
Screw
Rear Side
Flexible wire AWG14
X2 100nF
C20F.0222
16
20
Medical Version (M5)
Screw
Rear Side
Flexible wire AWG14
X1 100nF
C20F.0224
16
20
Medical Version (M5)
Screw
Rear Side
Quick connect terminals 6.3 x 0.8
mm
X2 100nF
C20F.0122
16
20
Medical Version (M5)
Screw
Rear Side
Quick connect terminals 6.3 x 0.8
mm
X1 100nF
C20F.0124
16
20
Medical Version (M5)
Screw
Rear Side
Solder terminals
X2 100nF
C20F.0022
16
20
Medical Version (M5)
Screw
Rear Side
Solder terminals
X1 100nF
C20F.0024
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
EMC Products
█
5
█
C20F
Rated Current
IEC
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Rated Current Filter-Type
UL
Panel mounting
Mounting side
Terminal
Capacitor
V-Lock
Wire length: 150 mm
Packaging unit
20 Pcs
Accessories
Description
Wire Harness
Wire harness for SCHURTER products
Assorted Covers
Rear Cover
0859.0047
Cord retaining kits
Cord retaining strain relief
Countersunk, K
4700.0010
Flat head, L
4700.0011
Mating Outlets/Connectors
Category / Description
Connector Overview complete
IEC Connector C19, Rewireable, Straight
4795
IEC Connector C19, Rewireable, Angled
4790
IEC Connector C19, Rewireable, Straight
0104U
Connector further types to C20F
6
EMC Products
Order Number
C20F
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Mating Outlets/Connectors shuttered
Power Cord Overview complete
Overview Power Cord with IEC Appliance Connector C19, V-Lock, straight
VAC19KS
06.02.2018
Power Cord further types to C20F
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
EMC Products
7
Similar pages