EXH Two-Way Radio Antenna FEATURES • Injection molded ¼ wave base loaded antenna • High gain • High durability, high efficiency • Textured finish with strain-relief base • Available in various standard connectors • An original ‘Tuf Duck’ antenna arameter SPECIFICATION Frequency Range VHF Nominal Impedance 50 ohms VSWR 2:1 max at resonance Power Raiting Max Power - 50 watts Temperature Range -40°C to +85°C Drop Test 1M Length 10.50 inches 1 1 The length noted is the maximum possible length for this LMR antenna. The actual length of the antenna will vary according to the connector chosen. ors PART# FREQUENCY BAND CONNECTORS COLOR CODE EXH150 145-155 MHz BN, KR, MX, SF, SFU, SM, SMV & TN Red EXH155 150-160 MHz BN, KR, MD, MX, SF, SFU, SM, SMV & TN Brown EXH160 155-165 MHz BN, KR, MX, SF, SFU, SM, SMV & TN Black EXH170 165-175 MHz BN, KR, MD, MX, SF, SFU, SM, SMV & TN Orange The EXH model antenna is available in the above frequencies and connectors. Order by antenna model, frequency and connector. For example: EXH150SF. Specifications subject to change without notice. Americas: +1.847 839.6925 [email protected] Europe: +44.1628.858941 [email protected] Asia: [email protected] Middle East & Affrica: +44.1628.858941 [email protected] www.lairdtech.com ANT-DS-EXH 1216 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2016 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.