ADMOS AMS1009BS Voltage reference diode Datasheet

Advanced
Monolithic
Systems
AMS1009
VOLTAGE REFERENCE DIODE
RoHS compliant
FEATURES
APPLICATIONS
• ±5 mV (±0.2%) Max. Initial Tolerance (A grade)
• Wide Operating Current Range
• Low Voltage Reference 2.5V
• Max. 0.6Ω Dynamic Impedance (A grade)
• Low Temperature Coefficient
• Power Supplies
• Instrumentation
• 8 Bit A/D, D/A Reference
• Current Loop Measurement and Control Systems
• Reference for 5V Systems
GENERAL DESCRIPTION
The AMS1009 is a precision band-gap voltage reference diode. This voltage reference features a very low dynamic impedance
and good temperature coefficient, operating over a wide current range of 400µA to 10mA. On-chip trimming is used to
provide tight tolerance and minimize temperature drift. A third terminal allows the reference voltage to be adjusted to ±5% to
calibrate out system errors.
The AMS1009 is used as a precision 2.5V low voltage reference for digital voltmeters, power supplies or op amp circuitry, and
the 2.5V make it easy to obtain a stable reference from 5V logic supplies.
The AMS1009 is available in TO-92 and SO-8 packages operating over a 0°C to 70°C temperature range.
ORDERING INFORMATION:
TOL.
PACKAGE TYPE
TO-92
±5mV AMS1009AN
±10mV AMS1009BN
OPERATING
8 LEAD SOIC
AMS1009AS
AMS1009BS
TEMPERATURE RANGE
0 to 70° C
0 to 70° C
PIN CONNECTIONS
TO-92
Plastic Package (N)
3
2
1
8L SOIC
SO Package (S)
+
8
1
N/C N/C ADJ
7
6
5
2
3
N/C N/C N/C
Bottom View
Advanced Monolithic Systems, Inc.
4
-
Top View
www.advanced-monolithic.com
Phone (925) 443-0722
Fax (925) 443-0723
AMS1009
ABSOLUTE MAXIMUM RATINGS (Note 1)
Reverse Current
20mA
Forward Current
10mA
Operating Temperature Range
0°C to 70°C
Storage temperature
-55°C to +150°C
Soldering information (25 sec.)
265°C
ELECTRICAL CHARACTERISTICS
Electrical Characteristics at IR = 1 mA, and TA = +25°C unless otherwise specified.
Parameter
Conditions
AMS1009A
Typ
Max
Min
Reverse Breakdown Voltage
2.495
Reverse Dynamic Impedance
Min
2.500
2.505
0.2
AMS1009B
Typ
Max
2.490
Units
2.500
2.510
V
0.6
0.2
1.0
Ω
0.4
1.4
0.4
1.4
2.6
10
2.6
10
3
12
3
12
Reverse Breakdown Voltage
Change with current
400µA ≤IR ≤10mA
Temperature Stability
TMIN ≤ TA ≤ TMAX
1.8
4
1.8
4
mV
Average Temperature Coeff.
0°C ≤ TA ≤ 70°C
15
25
15
25
ppm/°C
Long Term Stability (Note 4)
TA=25°C±.1°C
T = 1000 Hr
20
mV
20
ppm
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the
device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical
Characteristics. The guaranteed specifications apply only for the test conditions listed.
Note 2: For elevated temperature operation, Tj max is +125°C
Thermal Resistance
ϕ JA (junction to ambient)
TO-92
SO-8
170°C/W (0.125” leads)
165°C/W
Note 3: Parameters identified with boldface type apply at temperature extremes. All other numbers apply at TA = TJ = 25°C.
Note 4: The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating
TMAX and TMIN, divided by TMAX - TMIN. The measured temperatures are 0°C, 25°C and 70°C.
TYPICAL PERFORMANCE CHARACTERISTICS
Reverse Characteristics
Reverse Voltage Change
TJ =25° C
10 -4
10 -5
0.5
TJ =70° C
TJ = 0° C
1.8
2.2
1.0
1.4
REVERSE VOLTAGE (V)
2.6
Advanced Monolithic Systems, Inc.
3
2
1
0
~
~ ~
~
OUTPUT
2.0
5k
1.0
INPUT
OUTPUT
0
~
~
10
~
~
~
~
10
-3
2.5
4
INPUT
4
0
0
4
12
16
8
REVERSE CURRENT (mA)
www.advanced-monolithic.com
20
Phone (925) 443-0722
~
~
10 -2
Response Time
5
VOLTAGE SWING (V)
REVERSE VOLTAGE CHANGE (mV)
REVERSE CURRENT (µA)
10 -1
0
1
TIME (µs)
20
Fax (925) 443-0723
AMS1009
TYPICAL APPLICATIONS
2.5V Reference
Wide Supply Range, Adjustable Reference
+3.6V TO +40V
VIN= 5V TO 35V
V+
LM334
3.6k
V-
R
62Ω
OUTPUT
AMS1009
OUTPUT
10k*
TRIM
10k
AMS1009
*Does not affect Temperature Coefficient
Low Temperature Coefficient Power Regulator
AMS1085
VIN
IN
OUT
ADJ
VOUT
1.2k
375
AMS1009
2k
PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted.
3 LEAD TO-92 PLASTIC PACKAGE (N)
0.060±0.005
(1.524±0.127)
DIA
0.180±0.005
(4.572±0.127)
0.180±0.005
(4.572±0.127)
0.060±0.010
(1.524±0.254)
0.90
(2.286)
NOM
0.140±0.010
(3.556±0.127)
5° NOM
0.500
(12.70)
MIN
0.050±0.005
(1.270±0.127)
Advanced Monolithic Systems, Inc.
0.050
(1.270)
MAX
10°
NOM
UNCONTROLLED
LEAD DIMENSIONS
0.016±0.003
(0.406±0.076)
0.015±0.002
(0.381±0.051)
www.advanced-monolithic.com
N (TO-92 ) AMS DRW# 042391
Phone (925) 443-0722
Fax (925) 443-0723
AMS1009
PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted (Continued).
8 LEAD SOIC PLASTIC PACKAGE (S)
0.189-0.197*
(4.801-5.004)
8
7
6
5
0.228-0.244
(5.791-6.197)
0.150-0.157**
(3.810-3.988)
1
2
3
4
0.010-0.020 x 45°
(0.254-0.508)
0.053-0.069
(1.346-1.752)
0.004-0.010
(0.101-0.254)
0.014-0.019
(0.355-0.483)
0.008-0.010
(0.203-0.254)
0.050
(1.270)
TYP
0°-8° TYP
0.016-0.050
(0.406-1.270)
S (SO-8 ) AMS DRW# 042293
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
Advanced Monolithic Systems, Inc.
www.advanced-monolithic.com
Phone (925) 443-0722
Fax (925) 443-0723
Similar pages