September 20, 2006 SMD INDUCTOR DR365-2 SERIES Features z z z z z Low Profile Surface Mount Design Inductance Range from 3.3 µH to 47.0 µH Materials meet UL94V-0 Temperature Range -40°C to +85°C Tinned Leads with Leaded Solder is Available (note 4) ELECTRICAL SPECIFICATION AT 25°C Inductance (µH ) @ 100kHz, 0.1V Part Number DR365-2-332 DR365-2-472 DR365-2-682 DR365-2-103 DR365-2-153 DR365-2-223 DR365-2-333 DR365-2-473 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% DCR (Ω) Max. 0.09 0.11 0.15 0.19 0.30 0.44 0.64 0.88 Rated DC Current (A) Max. 1.25 1.20 0.90 0.85 0.57 0.54 0.38 0.35 Schematic A A A A A B B B MECHANICAL OUTLINES 1 .236 6,00 4 4 XXX 2 1 .291 MAX. 7,40 .024 0,60 3 .228 MAX. 5,80 3 .177 4,50 .059 MAX. 1,50 2 .165 4,20 .142 3,60 1 .134 3,40 .055 1,40 SUGGESTED PAD LAYOUT 2 .043 1,10 SCHEMATIC "A" 4 1 3 2 SCHEMATIC "B" NOTES: 1. Dimensions are shown in inches/millimeters Unless otherwise specified, tolerance = Inches: ±0.010 = Millimeters: ±0,25 2. Inductance is approximately 10% lower @ rated DC current from initial value 3. Tape & Reel Packaging, 2000 pieces per reel. 4. For non-RoHS parts replace DR prefix with 42- (e.g. DR365-2 becomes 42-365-2) 5. Component lead plating typically is SN96AG4 (SN100 and SN99.3CU0.7 can be used in accordance with J-STD-020C) DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.