TDK B41790A7198Q001 Aluminum electrolytic capacitor Datasheet

Aluminum electrolytic capacitors
Axial-lead and soldering star capacitors
Series/Type:
B41690, B41790
Date:
December 2016
© EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Axial-lead and soldering star capacitors
B41690, B41790
Ultra compact up to 140 °C
Applications
Automotive electronics
Features
High vibration stability, special design with high vibration
stability up to 60 g available upon request
Ultra compact design
Long useful life, 2000 h at up to 140 °C
High ripple current capability
SIKOREL design storage for up to 15 years at a
temperature of up to 35 °C
RoHS-compatible
Construction
Charge/discharge-proof, polar
Aluminum case with insulating sleeve
Negative pole connected to case
Version without insulation available upon request
Terminals
Axial leads, welded to capacitor case and cover disc
Soldering star option for upright mounting on PCB
Alternative axial-lead design with double-sided plates for
horizontal mounting available upon request
Taping and packing
Axial-lead capacitors will be delivered in pallet package
Capacitors with d × l ≤ 16 × 30 mm are also available taped
on reel
Soldering star capacitors are packed in blister trays
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 18
B41690, B41790
Ultra compact up to 140 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
25 ... 40 V DC
1.3 VR
600 ... 10000 μF
10/+30% Q
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL1)
Diameter d (mm)
Voltage endurance test
125 °C; VR
14
16
Terminals
Length l (mm) Approx. ESL (nH)
axial
25
29
30
35
39
49
25
30
35
39
49
Requirements:
ΔC/C
ESR
Ileak
soldering star
Useful life2)
140 °C; VR; 0.6 IAC,R
125 °C; VR; IAC, R
85 °C; VR; IAC, max
40 °C; VR; 2 IAC, R
12
> 2000 h
> 5000 h
> 15000 h
> 500000 h
2000 h
21
6
22
24
6
7
26
29
31
33
7
8
9
9
18
20
21
30
34
38
8
10
11
38
45
50
13
14
≤ 30% of initial value
≤ 3 times initial specified limit3)
≤ initial specified limit
Post test requirements:
ΔC/C
≤ 10% of initial value
ESR
≤ 1.3 times initial specified limit3)
Ileak
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc: Frequency range 10 Hz ... 2 kHz, displacement amplitude max. 1.5 mm, acceleration max. 20 g, duration 3 × 2 h.
Capacitor mounted by its wire leads at a distance of (6 ±1) mm from
the case and additionally clamped by the case.
IEC climatic category
To IEC 60068-1: 55/125/56 (55 °C/+125 °C/56 days damp heat test)
Detail specification
Sectional specification
Similar to CECC 30301-802
IEC 60384-4
1) If optimum circuit design is used, the values are lower by 30%.
2) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
3) ESRmax at 100 Hz, 20 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 18
B41690, B41790
Ultra compact up to 140 °C
B41690, Axial-lead capacitors
Dimensional drawing
Dimensions, weights and packing units
d×l
mm
12 × 30
14 × 25
14 × 30
16 × 25
16 × 30
16 × 35
16 × 39
18 × 25
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
dmax × Imax
mm
12.5 × 30.5
14.5 × 25.5
14.5 × 30.5
16.5 × 25.5
16.5 × 30.5
16.5 × 35.5
16.5 × 40
18.5 × 25.5
18.5 × 30.5
18.5 × 40
20.5 × 29.5
21.5 × 40
21.5 × 50
Please read Cautions and warnings and
Important notes at the end of this document.
Approx. weight
g
5.1
5.7
6.8
7.4
8.9
10.4
11.7
9.3
11.1
14.7
13.5
20.0
25.0
Page 4 of 18
Packing units (pcs.)
Pallet
Reel
288
450
200
350
200
350
180
250
180
250
180
250
180
250
160
160
160
140
140
110
B41690, B41790
Ultra compact up to 140 °C
B41790, Soldering star capacitors
Dimensional drawings
Mounting holes d = 12 mm ... 14 mm
Mounting holes d = 16 mm ... 21 mm
Dimensions, weights and packing units
d×l
mm
12 × 30
14 × 25
14 × 30
16 × 25
16 × 30
16 × 35
16 × 39
18 × 25
18 × 30
18 × 39
21 × 39
21 × 49
dmax × Imax
mm
13.5 × 32
15.5 × 27
15.5 × 32
17.5 × 27
17.5 × 32
17.5 × 37
17.5 × 41.5
19.5 × 27
19.5 × 32
19.5 × 41.5
22.5 × 41.5
22.5 × 51.5
Please read Cautions and warnings and
Important notes at the end of this document.
c ±0.1
mm
12.5
14.5
14.5
16.5
16.5
16.5
16.5
18.5
18.5
18.5
21.5
21.5
e ±0.1
mm
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.5
3.5
Page 5 of 18
Approx. weight
g
5.4
6.1
7.2
7.9
9.4
10.9
12.2
9.9
11.8
15.4
21.0
26.0
Packing units
pcs.
480
480
480
300
300
200
200
300
300
200
324
264
B41690, B41790
Ultra compact up to 140 °C
Overview of available types
VR (V DC)
25
35
40
Case dimensions d × l (mm)
CR (μF)
12 × 30
600
1000
1200
14 × 25
14 × 30
16 × 25
16 × 30
12 × 30
1400
18 × 30
1800
16 × 30
1900
2000
14 × 30
2300
16 × 35
2500
18 × 30
18 × 39
2700
2900
16 × 30
3000
18 × 25
20 × 29
18 × 39
3800
3900
18 × 30
4300
16 × 39
5000
20 × 29
21 × 39
21 × 39
5200
5800
20 × 29
18 × 39
21 × 49
7000
8000
21 × 39
10000
21 × 49
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 18
21 × 49
B41690, B41790
Ultra compact up to 140 °C
Case dimensions and ordering codes
CR
100 Hz
20 °C
μF
Case
dimensions
d×l
mm
VR = 25 V DC
12 × 30
1200
14 × 30
2000
16 × 30
2900
18 × 25
3000
18 × 30
3900
16 × 39
4300
20 × 29
5000
5800
18 × 39
21 × 39
8000
21 × 49
10000
VR = 35 V DC
14 × 25
1000
16 × 25
1400
16 × 30
1900
16 × 35
2300
18 × 30
2500
20 × 29
3000
3800
18 × 39
21 × 39
5200
21 × 49
7000
VR = 40 V DC
12 × 30
600
14 × 30
1000
16 × 30
1400
18 × 30
1800
20 × 29
2300
2700
18 × 39
21 × 39
3900
21 × 49
5200
Ordering code
Axial pallet
Ordering code
Axial reel
Ordering code
Soldering star
B41690A5128Q001
B41690A5208Q001
B41690A5298Q001
B41690A5308Q001
B41690A5398Q001
B41690A5438Q001
B41690A5508Q001
B41690A5588Q001
B41690A5808Q001
B41690A5109Q001
B41690A5128Q003
B41690A5208Q003
B41690A5298Q003
B41790A5128Q001
B41790A5208Q001
B41790A5298Q001
B41790A5308Q001
B41790A5398Q001
B41790A5438Q001
B41690A7108Q001
B41690A7148Q001
B41690A7198Q001
B41690B7238Q001
B41690A7258Q001
B41690A7308Q001
B41690A7388Q001
B41690A7528Q001
B41690A7708Q001
B41690A7108Q003
B41690A7148Q003
B41690A7198Q003
B41690B7238Q003
B41690A7607Q001
B41690B7108Q001
B41690B7148Q001
B41690A7188Q001
B41690A7238Q001
B41690A7278Q001
B41690A7398Q001
B41690B7528Q001
B41690A7607Q003
B41690B7108Q003
B41690B7148Q003
Please read Cautions and warnings and
Important notes at the end of this document.
B41690A5438Q003
B41790A5588Q001
B41790A5808Q001
B41790A5109Q001
B41790A7108Q001
B41790A7148Q001
B41790A7198Q001
B41790B7238Q001
B41790A7258Q001
B41790A7388Q001
B41790A7528Q001
B41790A7708Q001
Page 7 of 18
B41790A7607Q001
B41790B7108Q001
B41790B7148Q001
B41790A7188Q001
B41790A7278Q001
B41790A7398Q001
B41790B7528Q001
B41690, B41790
Ultra compact up to 140 °C
Technical data
CR
100 Hz
20 °C
μF
Case
dimensions
d×l
mm
VR = 25 V DC
12 × 30
1200
14 × 30
2000
16 × 30
2900
18 × 25
3000
18 × 30
3900
16 × 39
4300
20 × 29
5000
18 × 39
5800
21 × 39
8000
21 × 49
10000
VR = 35 V DC
14 × 25
1000
16 × 25
1400
16 × 30
1900
16 × 35
2300
18 × 30
2500
20 × 29
3000
18 × 39
3800
21 × 39
5200
21 × 49
7000
VR = 40 V DC
12 × 30
600
14 × 30
1000
16 × 30
1400
18 × 30
1800
20 × 29
2300
18 × 39
2700
21 × 39
3900
21 × 49
5200
ESRmax
100 Hz
20 °C
mΩ
ESRmax
100 Hz
40 °C
mΩ
ESRmax
10 kHz
20 °C
mΩ
Zmax
100 kHz
20 °C
mΩ
IAC,max
10 kHz
105 °C
A
IAC,max
10 kHz
125 °C
A
IAC,R
10 kHz
125 °C
A
IAC,max
10 kHz
140 °C
A
135
90
60
58
45
40
37
30
25
20
1000
620
460
530
330
310
260
230
160
130
70
48
32
40
25
21
21
17
14
11
68
47
31
38
24
21
21
17
14
11
4.9
5.8
8.4
7.5
9.4
11.6
10.0
12.9
14.2
17.7
3.6
4.3
6.2
5.6
7.0
8.6
7.4
9.5
10.5
13.2
2.5
3.0
4.3
3.8
4.8
5.9
5.1
6.6
7.3
9.1
1.6
1.9
2.8
2.5
3.1
3.5
3.3
4.3
4.8
5.9
125
100
65
54
50
45
35
27
21
900
620
460
440
360
310
210
160
120
65
52
32
33
25
23
17
14
11
63
50
31
31
24
22
17
14
11
4.7
5.0
8.2
9.7
9.4
10.0
12.7
14.0
17.7
3.5
3.7
6.1
7.2
7.0
7.4
9.4
10.4
13.2
2.4
2.6
4.2
5.0
4.8
5.1
6.5
7.2
9.1
1.5
1.7
2.7
3.2
3.1
3.3
4.2
4.7
5.9
165
105
70
58
48
40
30
23
1000
620
460
330
260
210
150
120
70
48
32
26
23
17
14
11
68
47
31
25
22
17
14
11
4.9
5.8
8.2
9.4
10.0
12.7
14.0
17.7
3.6
4.3
6.1
6.9
7.4
9.4
10.4
13.2
2.5
3.0
4.2
4.8
5.1
6.5
7.2
9.1
1.6
1.9
2.7
3.1
3.3
4.2
4.7
5.9
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 18
B41690, B41790
Ultra compact up to 140 °C
Useful life1)
depending on ambient temperature TA under ripple current operating conditions at VR
Useful life1)
depending on case temperature TC under ripple current operating conditions at VR
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 18
B41690, B41790
Ultra compact up to 140 °C
Useful life1)
depending on ambient temperature TA under ripple current operating conditions at Vop
VR = 25 V: Vop ≤ 20 V; VR = 35 V: Vop ≤ 30 V;
VR = 40 V: Vop ≤ 35 V
Useful life1)
depending on case temperature TC under ripple current operating conditions at Vop
VR = 25 V: Vop ≤ 20 V; VR = 35 V: Vop ≤ 30 V;
VR = 40 V: Vop ≤ 35 V
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 18
B41690, B41790
Ultra compact up to 140 °C
Frequency factor of permissible ripple
current IAC versus frequency f
Frequency characteristics of ESR
Typical behavior
Equivalent series resistance ESR
versus frequency f
Typical behavior for 1000 μF/40 V
Impedance Z
versus frequency f
Typical behavior for 1000 μF/40 V
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 18
B41690, B41790
Ultra compact up to 140 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have been optimized both with a view to the intended
application and with regard to health and environmental compatibility. They do not contain any
solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes, although in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no alternative materials are currently
known. We do, however, restrict the amount of dangerous materials used in our products to an
absolute minimum.
Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously
adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU
regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV.
MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data
book. MDS for customer specific capacitors are available upon request.
MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request.
Nevertheless, the following rules should be observed when handling aluminum electrolytic
capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come
into contact with the skin, wash the affected areas immediately with running water. If the eyes
are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical
treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should
be well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 18
B41690, B41790
Ultra compact up to 140 °C
Product safety
The table below summarizes the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Polarity
Reverse voltage
Mounting
position of screwterminal capacitors
Robustness of
terminals
Mounting of
single-ended
capacitors
Soldering
Soldering,
cleaning agents
Upper category
temperature
Passive
flammability
Safety information
Reference
chapter "General
technical information"
Make sure that polar capacitors are connected
1
with the right polarity.
"Basic construction of
aluminum electrolytic
capacitors"
Voltages of opposite polarity should be prevented 3.1.6
by connecting a diode.
"Reverse voltage"
Screw terminal capacitors must not be mounted
11.1.
with terminals facing down unless otherwise
"Mounting positions of
specified.
capacitors with screw
terminals"
The following maximum tightening torques must
11.3
not be exceeded when connecting screw
"Mounting torques"
terminals:
M5: 2.5 Nm
M6: 4.0 Nm
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Do not exceed the upper category temperature.
7.2
"Maximum permissible
operating temperature"
Avoid external energy, e.g. fire.
8.1
"Passive flammability"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 18
B41690, B41790
Ultra compact up to 140 °C
Topic
Safety information
Active
flammability
Maintenance
Avoid overload of the capacitors.
Storage
Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
capacitors.
Do not apply excessive mechanical stress to the
capacitor terminals when mounting.
Do not store capacitors at high temperatures or
high humidity. Capacitors should be stored at
+5 to +35 °C and a relative humidity of ≤ 75%.
Breakdown strength Do not damage the insulating sleeve, especially
of insulating
when ring clips are used for mounting.
sleeves
Reference
chapter "General
technical information"
8.2
"Active flammability"
10
"Maintenance"
7.3
"Shelf life and storage
conditions"
Reference
chapter "Capacitors with
screw terminals"
"Screw terminals accessories"
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products.
Detailed information can be found on the Internet under www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 18
B41690, B41790
Ultra compact up to 140 °C
Symbols and terms
Symbol
English
German
C
CR
CS
CS,T
Cf
d
dmax
ESL
ESR
ESRf
Capacitance
Rated capacitance
Series capacitance
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Equivalent series resistance
Equivalent series resistance at
frequency f
Equivalent series resistance at
temperature T
Frequency
Current
Alternating current (ripple current)
Root-mean-square value of alternating
current
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Insulation resistance
Balancing resistance
Temperature
Temperature difference
Ambient temperature
Case temperature
Capacitor base temperature
Time
Period
Service life (operating hours)
Kapazität
Nennkapazität
Serienkapazität
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
f
I
IAC
IAC,RMS
IAC,f
IAC,max
IAC,R
Ileak
Ileak,op
l
lmax
R
Rins
Rsymm
T
ΔT
TA
TC
TB
t
Δt
tb
Please read Cautions and warnings and
Important notes at the end of this document.
Ersatzserienwiderstand bei Temperatur T
Frequenz
Strom
Wechselstrom
Wechselstrom, Effektivwert
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
Reststrom
Betriebsreststrom
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
Isolationswiderstand
Symmetrierwiderstand
Temperatur
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Temperatur des Gehäusebodens
Zeit
Zeitraum
Brauchbarkeitsdauer (Betriebszeit)
Page 15 of 18
B41690, B41790
Ultra compact up to 140 °C
Symbol
V
VF
Vop
VR
VS
XC
XL
Z
ZT
tan δ
λ
ε0
εr
ω
English
Voltage
Forming voltage
Operating voltage
Rated voltage, DC voltage
Surge voltage
Capacitive reactance
Inductive reactance
Impedance
Impedance at temperature T
Dissipation factor
Failure rate
Absolute permittivity
Relative permittivity
Angular velocity; 2 π f
German
Spannung
Formierspannung
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
Elektrische Feldkonstante
Dielektrizitätszahl
Kreisfrequenz; 2 π f
Note
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 18
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
Page 17 of 18
Important notes
7. The trade names EPCOS, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,
MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Page 18 of 18
Similar pages