BAT54-V, BAT54A-V, BAT54C-V, BAT54S-V Vishay Semiconductors Small Signal Schottky Diodes, Single and Dual Features • These diodes feature very low turn-on voltage and fast switching • These devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC BAT54-V BAT54A-V 3 3 Top View Mechanical Data Case: SOT-23 Weight: approx. 8.8 mg Packaging codes/options: GS18/10K per 13" reel (8 mm tape), 10K/box GS08/3K per 7" reel (8 mm tape), 15K/box 1 2 1 2 BAT54C-V BAT54S-V 3 3 Top View 1 2 1 2 18034 Parts Table Part Ordering code BAT54-V Type marking Remarks BAT54-V-GS18 or BAT54-V-GS08 L4 Tape and reel BAT54A-V BAT54A-V-GS18 or BAT54A-V-GS08 L42 Tape and reel BAT54C-V BAT54C-V-GS18 or BAT54C-V-GS08 L43 Tape and reel BAT54S-V BAT54S-V-GS18 or BAT54S-V-GS08 L44 Tape and reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Repetitive peak reverse voltage Forward continuous current Repetitive peak forward current Surge forward current current tp < 1 s Power dissipation Symbol Value Unit VRRM 30 V IF 200 1) mA IFRM 300 1) mA IFSM 600 1) mA Ptot 230 mW Symbol Value Unit 1) K/W Note 1) Device on fiberglass substrate, see layout on next page. Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Thermal resistance junction to ambient air Junction temperature Storage temperature range RthJA 430 Tj 125 °C Tstg - 65 to + 150 °C Note 1) Device on fiberglass substrate, see layout on next page. Document Number 85508 Rev. 1.7, 16-Jul-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 BAT54-V, BAT54A-V, BAT54C-V, BAT54S-V Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Min. IR = 100 µA (pulsed) V(BR) 30 Pulse test tp < 300 µs, δ < 2 % at VR = 25 V IR 2 µA IF = 0.1 mA, tp < 300 µs, δ < 2 % VF 240 mV IF = 1 mA, tp < 300 µs, δ < 2 % VF 320 mV IF = 10 mA, tp < 300 µs, δ < 2 % VF 400 mV IF = 30 mA, tp < 300 µs, δ < 2 % VF 500 mV IF = 100 mA, tp < 300 µs, δ < 2 % VF 800 mV VR = 1 V, f = 1 MHz CD 10 pF IF = 10 mA to IR = 10 mA, iR = 1 mA, RL = 100 Ω trr 5 ns Reverse Breakdown voltage Leakage current Forward voltage Diode capacitance Reverse recovery time Typ. Max. Unit V Layout for RthJA test Thickness: Fiberglass 1.5 mm (0.059 in.) Copper leads 0.3 mm (0.012 in.) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) 17451 Typical Characteristics Tamb = 25 °C, unless otherwise specified 14 100 C D - Typical Capacitance (pF) I F - Forward Current (mA) 1000 T j = 125 °C - 40 °C 10 1 25 °C 0.1 0.01 0 18867 2 10 8 6 4 2 0 0.2 1.2 0.4 0.6 0.8 1 VF - Forward Voltage (V) 0 1.4 Figure 1. Typical Forward Voltage Forward Current vs. Various Temperatures www.vishay.com 12 18868 4 12 16 20 24 8 VR - Reverse Voltage (V) 28 Figure 2. Diode Capacitance vs. Reverse Voltage VR For technical questions within your region, please contact one of the following: Document Number 85508 [email protected], [email protected], [email protected] Rev. 1.7, 16-Jul-10 BAT54-V, BAT54A-V, BAT54C-V, BAT54S-V Vishay Semiconductors 1000 I R - Reverse Current (µA) T j = 125 °C 100 100 °C 75 °C 10 50 °C 1 25 °C 0.1 0.01 0 5 18869 10 15 20 25 VR - Reverse Voltage (V) 30 Figure 3. Typical Variation of Reverse Current vs. Various Temperatures Package Dimensions in millimeters (inches): SOT-23 0.9 (0.035) 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.550 ref. (0.022 ref.) 0.1 (0.004) max. 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) 0.7 (0.028) 0.95 (0.037) 0.9 (0.035) 1.43 (0.056) 1 (0.039) 0.9 (0.035) Foot print recommendation: 2 (0.079) 1 (0.039) 0.9 (0.035) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 0.95 (0.037) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Document Number 85508 Rev. 1.7, 16-Jul-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000