ACFM-7109 PCS/Cellular Band Quadplexer Data Sheet Description Features The Avago Technologies’ ACFM-7109 is a quadplexer that combines PCS and Cellular duplexers into a single, miniature package. x Single Antenna The ACFM-7109 features a single antenna connection, eliminating the need for antenna switching. All ports are matched to 50 ohms. The ACFM-7109 is designed with Avago Technologies’ Film Bulk Acoustic Resonator (FBAR) technology. The ACFM-7109 also utilizes Avago Technologies’ innovative Microcap bonded-wafer, chip scale packaging technology. This process allows the filters to be assembled in a module with a footprint of only 3 x 5 mm and maximum height of 1.05 mm. Low Tx Insertion Loss of the ACFM-7109 reduces power amplifier current, extending battery life and talk time. The ACFM-7109 enhances receiver sensitivity and dynamic range with low Rx Insertion Loss and high rejection of Tx signals at the Rx ports. The excellent power handling capability of Avago Technologies’ FBAR bulk-mode resonators supports the high Tx output power levels needed in handsets while adding virtually no distortion x Miniature size – 3 x 5 mm footprint – 1.05 mm max height x High Power Rating – +33 dBm Max Tx Power x Environmental – RoHS Compliant – Halogen Free – TBBPA Free Specifications x Performance guaranteed -20° to +85° C x Cellular Duplexer Rx (869 – 894 MHz) – Insertion Loss: 3.5 dB Max (25° C) – Noise Blocking: 45 dB Min x Cellular Duplexer Tx (824 – 849 MHz) – Insertion Loss: 2.8 dB Max (25° C) – Interferer Blocking: 55 dB Min Functional Block Diagram Ant x All ports matched to 50 ohms x PCS Duplexer Rx (1930.5 – 1989.5 MHz) Port 1 – Insertion Loss: 3.4 dB Max (25° C) – Noise Blocking: 45 dB Min (25° C) x PCS Duplexer Tx (1850.5 – 1909.5 MHz) – Insertion Loss: 2.9 dB Max (25° C) – Interferer Blocking: 54 dB Min Applications Port 4 Cell Tx Port 2 PCS Tx Port 3 PCS Rx Port 5 Cell Rx x Handsets or data terminals operating in the PCS and Cellular frequency bands ACFM-7109 Electrical Specifications, Z0 = 50 :, TC [1, 2] as indicated -20°C Symbol Parameter Units Min +25°C Max Min +85°C Typ [3] Max 1.9 3.5 1.0 1.5 Min Max Cellular Duplexer Performance Antenna Port to Cellular Receive Port S41 Insertion Loss in Rx Band (869–894 MHz) dB 3.6 S41 Insertion Loss Ripple (p-p) in Rx Band (869 – 894 MHz) dB S41 Attenuation in Tx Band (824 – 849 MHz) dB 50 50 S41 Attenuation, 0 – 804 MHz dB 25 25 25 S41 Attenuation in Tx 2nd harmonic Band (1648 – 1698 MHz) dB 30 30 30 S41 Attenuation in Tx 3rd harmonic Band (2472 – 2547 MHz) dB 19 19 19 S44 Return Loss (SWR) of Rx Port in Rx Band (869 – 894 MHz) dB 8 (2.3) 8 15 (1.4) (2.3) 8 (2.3) S11 Return Loss (SWR) of Ant Port in Rx Band (869 – 894 MHz) dB 8 (2.3) 8 18 (1.3) (2.3) 8 (2.3) 1.6 2.8 0.8 1.5 66 3.6 50 Cellular Transmit Port to Antenna Port S15 Insertion Loss in Tx Band (824 – 849 MHz) dB S15 Insertion Loss Ripple (p-p) in Tx Band (824 – 849 MHz) dB S15 Attenuation in Rx Band (869 – 894 MHz) dB 2.9 40 40 56 2.9 40 S15 Attenuation, 0 – 804 MHz dB 20 20 20 S15 Attenuation in GPS Band (1574.4 – 1576.4 MHz) dB 30 30 30 S15 Attenuation in Tx 2nd harmonic Band (1648 – 1698 MHz) dB 20 20 20 S15 Attenuation in Tx 3rd harmonic Band (2472 – 2547 MHz) dB 8 8 8 S55 Return Loss (SWR) of Tx Port in Tx Band (824 – 849 MHz) dB 9 (2.1) 9 16 (1.4) (2.1) 9 (2.1) S11 Return Loss (SWR) of Ant port in Tx Band (824 – 849 MHz) dB 9 (2.1) 9 22 (1.2) (2.1) 9 (2.1) S45 Isolation, Tx to Rx port in Rx Band (869 – 894 MHz) dB 45 45 59 45 S45 Isolation, Tx to Rx port in Tx Band (824 – 849 MHz) dB 55 55 64 55 Isolation, Cellular Transmit Port to Cellular Receive Port 2 ACFM-7109 Electrical Specifications, Z0 = 50 :, TC [1, 2] as indicated -20°C Symbol Parameter Units Min +25°C Max Min +85°C Typ [3] Max 1.7 3.4 1.1 2 Min Max PCS Duplexer Performance Antenna Port to PCS Receive Port S31 Insertion Loss in Rx Band (1930.5 – 1989.5 MHz) dB 3.6 3.6 S31 Insertion Loss Ripple (p-p) in Rx Band dB S31 Attenuation in Tx Band (1850.5 – 1909.5 MHz) dB S31 Attenuation, 0.03 – 1770 MHz dB 20 20 20 S31 Attenuation, 2025 – 3500 MHz dB 30 30 30 S31 Attenuation, 3500 – 3700 MHz dB 27 27 27 S31 Attenuation, 3820 – 4000 MHz dB 23 23 23 S33 Return Loss (SWR) of Rx Port in Rx Band (1930.5 – 1989.5 MHz) dB 9 (2.1) 9 18 (1.3) (2.1) 9 (2.1) S11 Return Loss (SWR) of Ant Port in Rx Band (1930.5 – 1989.5 MHz) dB 9 (2.1) 9 20 (1.2) (2.1) 9 (2.1) 1.3 2.9 0.8 2 50 50 61 50 PCS Transmit Port to Antenna Port S12 Insertion Loss in Tx Band (1850.5 – 1909.5 MHz) dB S12 Insertion Loss Ripple (p-p) in Tx Band dB S12 Attenuation in Rx Band (1930.5 – 1989.5 MHz) dB 3.1 40 40 54 3.1 40 S12 Attenuation, 0.03 – 1570 MHz dB 15 15 15 S12 Attenuation in GPS Band (1574.4 – 1576.4 MHz) dB 30 30 30 S12 Attenuation, 1580 – 1700 MHz dB 25 25 25 S12 Attenuation in Tx 2nd harmonic Band (3701 – 3819 MHz) dB 10 10 10 S12 Attenuation in Tx 3rd harmonic Band (5551.5 – 5728.5 MHz) dB 3 3 3 S22 Return Loss (SWR) of Tx Port in Tx Band (1850.5 – 1909.5 MHz) dB 9.5 (2.0) 9.5 18 (1.3) (2.0) 9.5 (2.0) S11 Return Loss (SWR) of Ant port in Tx Band (1850.5 – 1909.5 MHz) dB 9 (2.1) 9 20 (1.2) (2.1) 9 (2.1) Isolation, PCS Transmit Port to PCS Receive Port S32 Isolation, Tx to Rx port in Rx Band (1930.5 – 1989.5 MHz) dB 40 45 60 45 S32 Isolation, Tx to Rx port in Tx Band (1850.5 – 1909.5 MHz) dB 54 54 65 54 Notes: 1. TC is defined as Case Temperature, the temperature of the bottom mounting surface of the quadplexer where it makes contact with the circuit board. 2. Min/Max specifications are guaranteed at the indicated temperature with the input power to the Tx ports equal to or less than +27 dBm over all Tx frequencies unless otherwise noted. 3. Typical data is the arithmetic mean value of the parameter over its indicated frequency range at the specified temperature. Typical values may vary over time. 3 Absolute Maximum Ratings [1] Parameter Unit Value Storage temperature °C -65 to +125 Maximum RF Input Power to Tx Ports dBm +33 Parameter Unit Value Operating temperature, Tc [3] , Tx Power ≤ 29 dBm °C -40 to +100 Operating temperature, Tc [3] , Tx Power ≤ 30 dBm °C -40 to +85 Maximum Recommended Operating Conditions [2] Notes: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. 2. The device will function over the recommended range without degradation in reliability or permanent change in performance, but is not guaranteed to meet electrical specifications. 3. TC is defined as Case Temperature, the temperature of the bottom mounting surface of the quadplexer where it makes contact with the circuit board. 4 0.0 0.0 -0.5 -0.5 Insertion Loss (dB) Insertion Loss (dB) ACFM-7109 Typical Performance at Tc = 25°C -1.0 -1.5 -2.0 1860 1870 1880 1890 Frequency (MHz) 1900 -20 Insertion Loss (dB) Insertion Loss (dB) -10 -30 -40 -50 -60 1800 1850 1900 1950 2000 Frequency (MHz) 2050 2100 1850 1900 1950 2000 Frequency (MHz) Figure 5. PCS Tx and Rx Port Return Loss. 5 1950 1960 1970 Frequency (MHz) 1980 1990 2050 -30 -35 -40 -45 -50 -55 -60 -65 -70 -75 -80 1750 1800 1850 1900 1950 2000 Frequency (MHz) 2050 2100 1900 1950 2000 Frequency (MHz) 2050 2100 Figure 4. PCS Tx–Rx Isolation. Return Loss (dB) Return Loss (dB) Figure 3. PCS Tx Rejection in Rx Band and Rx Rejection in Tx Band. 1800 1940 Figure 2. PCS Rx Band Insertion Loss. 0 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 1750 -2.0 -3.0 1930 1910 Figure 1. PCS Tx Band Insertion Loss. -70 1750 -1.5 -2.5 -2.5 -3.0 1850 -1.0 2100 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 1750 1800 1850 Figure 6. PCS Antenna Port Return Loss. 0.0 0.0 -0.5 -0.5 Insertion Loss (dB) Insertion Loss (dB) ACFM-7109 Typical Performance at Tc = 25°C -1.0 -1.5 -2.0 825 830 835 840 Frequency (MHz) 845 850 Figure 7. Cellular Tx Insertion Loss. 870 -10 Insertion Loss (dB) -20 -30 -40 -50 -60 -70 800 850 900 Frequency (MHz) 800 Return Loss (dB) Figure 11. Cellular Tx and Rx Return Loss. 890 895 850 900 Frequency (MHz) 950 Figure 10. Cellular Tx–Rx Isolation. 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 850 900 Frequency (MHz) 880 885 Frequency (MHz) -40 -45 -50 -55 -60 -65 -70 -75 -80 -85 -90 950 Figure 9. Cellular Tx Rejection in Rx Band and Rx Rejection in Tx Band. 800 875 Figure 8. Cellular Rx Insertion Loss. 0 Insertion Loss (dB) -2.0 -3.0 -3.0 Return Loss (dB) -1.5 -2.5 -2.5 6 -1.0 950 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 800 850 900 Frequency (MHz) Figure 12. Cellular Band Antenna Return Loss. 950 ACFM-7109 Typical Performance at Tc = 25°C 0.8 1 0.8 1.5 0.6 1 1.5 0.6 2 2 0.4 0.4 3 3 4 0.4 0.2 0.6 0.8 1 1.5 2 3 4 5 4 5 5 10 20 10 20 50 50 -50 -20 -10 10 20 10 20 50 50 -50 -20 -10 0.4 0.2 0.6 0.8 1 1.5 2 3 4 5 -5 -4 -5 -4 -3 -3 -0.4 -0.4 -2 -0.6 -2 -0.6 -1.5 -0.8 -0.8 -1 Figure 13. PCS Tx Port Impedance in Tx Band (1850–1910 MHz). 0.8 -1.5 Figure 14. PCS Rx Port Impedance in Rx Band (1930–1990 MHz). 1 0.8 1.5 0.6 -1 1 1.5 0.6 2 2 0.4 0.4 3 3 4 0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 4 5 5 10 20 10 20 50 50 -50 -20 -10 10 20 10 20 50 50 -50 -20 -10 0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 -5 -4 -5 -4 -3 -0.4 -3 -0.4 -2 -0.6 -1.5 -0.8 -1 Figure 15. Ant Port Impedance in PCS Tx Band (1850–1910 MHz). 7 -2 -0.6 -1.5 -0.8 -1 Figure 16. Ant Port Impedance in PCS Rx Band (1930–1990 MHz). ACFM-7109 Typical Performance at Tc = 25°C 0.8 1 0.8 1.5 0.6 1 1.5 0.6 2 2 0.4 0.4 3 3 4 0.4 0.2 0.6 0.8 1 1.5 2 3 4 5 4 5 5 10 20 10 20 50 50 -50 -20 -10 10 20 10 20 50 50 -50 -20 -10 0.4 0.2 0.6 0.8 1 1.5 2 3 4 5 -5 -4 -5 -4 -3 -3 -0.4 -0.4 -2 -0.6 -2 -0.6 -1.5 -0.8 -0.8 -1 Figure 17. Cell Tx Port Impedance in Tx Band (824–849 MHz). 0.8 -1.5 Figure 18. Cell Rx Port Impedance in Rx Band (869–894 MHz). 1 0.8 1.5 0.6 -1 1 1.5 0.6 2 2 0.4 0.4 3 3 4 0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 4 5 5 10 20 10 20 50 50 -50 -20 -10 10 20 10 20 50 50 -50 -20 -10 0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 -5 -4 -5 -4 -3 -0.4 -3 -0.4 -2 -0.6 -1.5 -0.8 -1 Figure 19. Ant Port Impedance in Cell Tx Band (824–849 MHz). 8 -2 -0.6 -1.5 -0.8 -1 Figure 20. Ant Port Impedance in Cell Rx Band (869–894 MHz). ACFM-7109 4.80 5.0 0.95 (1.05 MAX) ANT Cell Tx Cell Rx 0.1 (all around) 3.0 2.40 2.80 1.40 PCS Rx 0.90 ORIENTATION MARK 3.90 4.80 TOP VIEW SIDE VIEW BOTTOM VIEW 0.20 X 45° (2 PLS) Notes: 1. Dimensions in mm Tolerance: X.X ± 0.1 mm X.XX ± 0.05 mm X.XXX ± 0.010 mm 2. Dimensions nominal unless otherwise noted 3. Angles 45° nominal 4. I/O Pads (5 ea) Size: 0.35 X 0.35 mm Spacing to ground metal: 0.30 mm 5. Contact areas are gold plated 0.025 X 45° (6 PLS) 0.65 0.35 0.95 DETAIL OF IO PAD AREAS Figure 21. Package Outline Drawing. PCS Rx PACKAGE ORIENTATION PCS Tx ACFM-7109 = Part Number Cell Rx AVAGO ACFM-7109 FBYWWDDXXXX ANT Figure 22. Package Marking 9 Cell Tx FB = Mfg Information Y = Year WW = Work Week DD = Date Code XXXX = Assembly Lot 0.35 ACFM-7109 2.40 0.35 x 0.35 2.80 1.40 0.90 3.90 4.80 Figure 23. ACFM-7109 Footprint, Dimensions in mm (top view). Ø 0.30 VIA ARRAY HORIZ PITCH = 0.53 VERT PITCH = 0.45 0.30 2.50 3.00 (REF) 0.35 0.95 1.50 PACKAGE OUTLINE 1.00 4.00 5.00 (REF) Figure 24. Suggested PCB Layout, Dimensions in mm (top view). 10 ACFM-7109 2.00 ±0.05 8.00 ±0.10 Ø 1.50 ±0.10 1.75 ±0.10 4.00 ±0.10 5.50 ±0.05 12.0 ±0.30 –0.10 Ø1.50 ±0.25 0.28 ±0.02 9° MAX 9° MAX 3.25 ±0.10 1.30 ±0.10 A. K. 5.25 ±0.10 B. Figure 25. SMT Tape Packing (12 mm tape). POCKET CAVITY Figure 26. Orientation in Tape. 11 AVAGO ACFM-7XXX AFFYMMDDXXXX AVAGO ACFM-7XXX AFFYMMDDXXXX AVAGO ACFM-7XXX AFFYMMDDXXXX SPROCKET HOLES AVAGO ACFM-7XXX AFFYMMDDXXXX AVAGO ACFM-7XXX AFFYMMDDXXXX AVAGO ACFM-7XXX AFFYMMDDXXXX PACKAGE ORIENTATION ACFM-7109 ESD Label (See Below) NO. Recycle Symbol SURFACE RESISTIVITY 1. Pantone 285U Dark Blue Antistatic Coated 106–1010 Per Ohms Square 2. Black Conductive <106 Per Ohms Square 3. White Antistatic Impregnated 106–1010 Per Ohms Square 4. Pantone 3295C Dark Green Antistatic Coated 106–1010 Per Ohms Square 5. Black Antistatic Coated 106–1010 Per Ohms Square 6. Pantone 278C Light Blue Antistatic Coated 106–1010 Per Ohms Square 7. White Antistatic Coated 106–1010 Per Ohms Square 8. Natural Antistatic Coated 106–1010 Per Ohms Square 9. Pantone 298C–299C Dull Light Blue Antistatic Coated 106–1010 Per Ohms Square Detail ‘X’ Embossed Line X2 90.0mm Length Lines 147.0mm away from center point Embossed ‘M’ 5.0mm Height COLOR Note: X in Part Numbering denotes colour code. FRONT VIEW Ø20.2 (Min) 25.65±1.75** 25.4±1.0* Recycle Symbol +0.5 Ø13.1 -0.2 2.2±0.5 See Detail ‘X’ FRONT BACK Ø100.0±0.5 Ø331.5 Max Detail ‘X’ Detail ‘Y’ Slot 10.0±0.5(2x) Slot 5.0±0.5***(1x) BACK VIEW Notes: 1. Reel (coated with proprietary antistatic agent), 10^9 to 10^11 Ohm / Sq 2. Carrier Tape (Carbon Polystyrene), 10^9 Ohm / Sq 3. Cover Tape, 10^10 to 10^11 Ohm / Sq Top layer – Transparent PET film Bonding Layer – Adhesive Polyolefin Sealing Layer – Peelable special film Figure 27. Reel Drawing. 12 30.4* Max ACFM-7109 Package Moisture Sensitivity Feature Test Method Performance Moisture Sensitivity Level (MSL) at 260° C J-STD-20C Level 3 300 250 Temperature, °C 200 150 100 50 Tested profile shown. 0 0 50 100 150 200 250 300 PROFILE.GRF PROFILE. WMF 6 February 2003 R. Waugh Time, seconds Figure 28. Verified SMT Solder Profile. Part Number No. of Devices Container ACFM-7109-BLK 100 Tape Strip or Anti-static Bag ACFM-7109-TR1 3000 330 mm (13-inch) Reel For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-2890EN - March 25, 2011