General Devices ChassisTrak Slides C-300-S Slide Catalog Number C-300-S-110 C-300-S-112 C-300-S-114 C-300-S-116 C-300-S-118 C-300-S-120 C-300-S-122 C-300-S-124 C-300-S-126 C-300-S-128 C-300-S-130 A B C 10.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 26.00 28.00 30.00 9.25 9.25 13.25 13.25 13.25 19.25 19.25 19.25 25.25 25.25 25.25 8.63 8.63 12.63 12.63 12.63 18.63 18.63 18.63 24.63 24.63 24.63 D D E E F (min) (max) (min) (max) 11.00 11.00 15.00 15.00 15.00 21.00 21.00 21.00 27.00 27.00 27.00 11.00 13.00 15.00 17.00 19.00 21.00 23.00 25.00 27.00 29.00 31.00 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 2.13 0.13 2.13 4.13 0.13 2.13 4.13 0.13 2.13 4.13 G H 3 2.31 0.78 3 2.31 0.78 4 4.31 1.16 4 4.31 1.16 4 4.31 1.16 5 7.31 3.53 5 7.31 3.53 5 7.31 3.53 7 10.31 2.28 7 10.31 2.28 7 10.31 2.28 Load Capacity 95 LBS. 95 LBS. 90 LBS. 90 LBS. 90 LBS. 85 LBS. 85 LBS. 85 LBS. 80 LBS. 80 LBS. 80 LBS. Order TO Numbering ORDER, C-300-S SPECIFY - - Stationary Section Length 1 - Cabinet Mount 2 - Strap Mount 4 - Closed Slot AR - Automatic Release if desired AND/OR RC - See chart below For information on Strap Mount option see page 27. Notes 1. Finish: All standard slides are coated with PoxylubeTM dry film lubricant. 2. All standard slides are designed to lock-out in the extended position and are available with an optional automatic release if lock-out is not desirable. 3. Standard hardware packages include all the hardware necessary to mount your Chassis Trak® slides: • Rear mounting bracket (B-217 or B-161) included • Bar Nuts (CA8056-06-0017 or CA8056-06-0014) • #10-32 screws and keps nuts 4. All sliding members of the standard slide are made from cold rolled steel. 5. All Chassis Trak® solid bearing slides are supplied with a quick disconnect feature. 6. Optional mounting patterns, slide lengths and extensions are available. 7. For optional mounting brackets see page 34. http://buy.advantech.com www.generaldevices.com Phone: 1-888-576-9668 Phone: 317-897-7000 Email: [email protected] Email: [email protected] 17 1 ISO 9001:2000 Registered Strap Mounting Option C-230 Strap Mount Notes 1. 2. 3. To order, specify C-230 - S - 2 XX see pages 14-15 for more information. Strap mount slides are not designed to accommodate the standard EIA hole pattern. All slides requires a .31” clearance behind the spring and button assembly for proper operation. A B 12.00 14.00 16.00 18.00 20.00 22.00 24.00 10.50 12.50 14.50 16.50 18.50 20.50 22.50 A B 10.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 26.00 28.00 30.00 8.50 10.50 12.50 14.50 16.50 18.50 20.50 22.50 24.50 26.50 28.50 A B 12.00 14.00 16.00 18.00 20.00 22.00 24.00 10.50 12.50 14.50 16.50 18.50 20.50 22.50 C-300 Strap Mount Notes 1. 2. 3. To order, specify C-300 - S - 2 XX see pages 16-17 for more information. Strap mount slides are not designed to accommodate the standard EIA hole pattern. All slides requires a .31” clearance behind the spring and button assembly for proper operation. CTS Strap Mount Notes 1. 2. 3. To order, specify CTS - 2 XX see pages 18-19 for more information. Strap mount slides are not designed to accommodate the standard EIA hole pattern. All slides requires a .31” clearance behind the spring and button assembly for proper operation. http://buy.advantech.com www.generaldevices.com Phone: 1-888-576-9668 Phone: 317-897-7000 Email: [email protected] Email: [email protected] 27 2 ISO 9001:2000 Registered Optional Mounting Brackets Matrix For Solid Bearing Slides & Appropriate Rear Mounting Brackets with Range of Extension C-300-D C-300-S C-874 C-3700 C-300-D-RC C-300-S-RC C-300-S-RC-3S C-874-RC C-3700-RC B-217* 0 to .50 0 to .50 0 to .50 0 to .50 B-217-1.5 .25 to .75 .25 to .75 .25 to .75 .25 to .75 B-217-2 .75 to 1.25 .75 to 1.25 .75 to 1.25 .75 to 1.25 B-217-2.5 1.25 to 1.75 1.25 to 1.75 1.25 to 1.75 1.25 to 1.75 B-217-3 1.75 to 2.25 1.75 to 2.25 1.75 to 2.25 1.75 to 2.25 B-217-3.5 2.25 to 2.75 2.25 to 2.75 2.25 to 2.75 2.25 to 2.75 B-217-4 2.75 to 3.25 2.75 to 3.25 2.75 to 3.25 2.75 to 3.25 B-308 0 to 6.00 0 to 6.00 B-793 0 to 6.00 0 to 6.00 B-161* 0 to .50 0 to .50 B-161-1.5 .25 to .75 .25 to .75 B-161-2 .75 to 1.25 .75 to 1.25 B-161-2.5 1.25 to 1.75 1.25 to 1.75 B-161-3 1.75 to 2.25 1.75 to 2.25 B-161-3.5 2.25 to 2.75 2.25 to 2.75 B-161-4 2.75 to 3.25 2.75 to 3.25 B-309 0 to 6.00 0 to 6.00 B-389 0 to .50 0 to .50 .25 to .75 .25 to .75 .75 to 1.25 .75 to 1.25 1.25 to 1.75 1.25 to 1.75 1.75 to 2.25 1.75 to 2.25 2.25 to 2.75 2.25 to 2.75 2.75 to 3.25 2.75 to 3.25 0 to 6.00 0 to 6.00 0 to 6.00 Note brackets are made from 16 gauge C.R.S. — Standard finish: clear zinc commercial plating *Supplied with standard slides CATALOG NUMBER B-217 or B-161 1.25 B-217-1.5 or B-161-1.5 1.50 A B-217-2 or B-161-2 2.00 B-217-2.5 or B-161-2.5 2.50 B-217-3 or B-161-3 3.00 B-217-3.5 or B-161-3.5 3.50 B-217-4 or B-161-4 4.00 B-217 B-308 B-389 34 http://buy.advantech.com www.generaldevices.com B-161 B-793 B-309 Phone: 1-888-576-9668 Email: [email protected] Email: [email protected] ISO 9001:2000 Registered 3 Phone: 317-897-7000