Datatronic DR358-5-732 Smd shielded inductor dr358-5 sery Datasheet

September 23, 2009
SMD SHIELDED INDUCTOR DR358-5 SERIES
Features





Low Profile Surface Mount Design
Flat Top for Pick and Place
Inductance Range from 3.0µH to 100.0µH
Operating Temp. -20°C to +80°C
Tinned Leads with Leaded Solder is Available (note 7)
ELECTRICAL SPECIFICATIONS AT 25ºC
Part No.
DR358-5-302
DR358-5-392
DR358-5-502
DR358-5-602
DR358-5-732
DR358-5-862
DR358-5-103
DR358-5-123
DR358-5-153
DR358-5-183
DR358-5-223
DR358-5-273
DR358-5-333
DR358-5-393
DR358-5-473
DR358-5-563
DR358-5-683
DR358-5-823
DR358-5-104
Inductance
(H)  30%
3.0
3.9
5.0
6.0
7.3
8.6
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
DCR
() Max.
0.024
0.027
0.031
0.035
0.054
0.058
0.065
0.070
0.084
0.095
0.128
0.142
0.165
0.210
0.238
0.277
0.304
0.390
0.535
I rated
(A) Max.
3.00
2.60
2.40
2.25
2.10
1.85
1.70
1.55
1.40
1.32
1.20
1.05
0.97
0.86
0.80
0.73
0.65
0.60
0.54
MECHANICAL OUTLINES
Notes:
1. All dimensions are shown in millimeter “mm”
2. General tolerance 0.2mm, unless other specified
3. Inductance Test: 10kHz, 0.1Vrms
4. Irated for an approximate 40C temperature rise
5. Irated for an approximate 35% drop maximum of the initial value
6. Tape and reel quantity, 1500 pcs/ 13” reel
7. For non-RoHS parts replace DR prefix with 42- (e.g. DR358-5 becomes 42-358-5)
8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020D
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected]
499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.