CPC1014N 4-Pin SOP OptoMOS® Relay Parameter Blocking Voltage Load Current Max On-resistance LED Current to operate Rating 60 400 2 2 Description Units VP mA Ω mA Features • Designed for use in security systems complying with EN50130-4 • Small 4-Pin SOP Package • TTL/CMOS Compatible input • Arc-Free With No Snubbing Circuits • 1500Vrms Input/Output Isolation • No EMI/RFI Generation • Immune to radiated EM fields • SMD Pick & Place, Wave Solderable • Tape & Reel Version Available Applications • Security • Passive Infrared Detectors (PIR) • Data Signalling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls The CPC1014N is a miniature 1-Form-A solid state relay in a 4-Pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input/output isolation. The super efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient GaAlAs infrared LED. The CPC1014N uses Clare’s state of the art, double-molded vertical construction packaging to produce one of the world’s smallest relays. The CPC1014N offers board space savings of at least 20% over the competitor’s larger 4-Pin SOP relay. Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950-1 Compliant • CSA Certified Component: Certificate # 1172007 Ordering Information Part # CPC1014N CPC1014NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control – Control 1 4 3 2 Load Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF tON Pb RoHS 2002/95/EC DS-CPC1014N-R01 e3 www.clare.com 1 CPC1014N Absolute Maximum Ratings (@ 25˚C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25°C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Current 1 2 3 2 Conditions Symbol Min Typ Max Units IF=2mA t =10ms IL=400mA VL=60VP IL ILPK RON ILEAK - - 400 1 2 1 mA AP Ω tON tOFF COUT - - 0.47 0.22 40 1 2 1 - IF IF VF IR 0.1 0.9 - 0.25 0.2 1.2 - 2 1.4 10 IF=5mA, VL=10V 50V; f=1MHz IL=400mA IF=5mA VR=5V µA ms pF pF mA mA V µA Load current derates linearly from 400mA @ 25oC to 200mA @80oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 4mA is recommended. www.clare.com R01 CPC1014N PERFORMANCE DATA* 15 10 5 10 5 15 10 5 0 0.18 0.20 0.22 0.24 LED Current (mA) 0.26 15 10 0 63.5 Typical IF for Switch Dropout (N=50, TA=25ºC, IL=400mA) 25 20 15 10 5 0 0.16 20 0.505 0.510 0.515 0.520 0.525 0.530 0.535 On-Resistance (Ω) 25 20 25 5 1.275 Device Count (N) 0.16 0.18 0.20 0.22 0.24 LED Current (mA) 64.5 65.0 65.5 66.0 Blocking Voltage (VP) 66.5 Typical Turn-On Time (N=50, TA=25ºC, IL=100mA, IF=5mA) 20 15 10 5 0.26 0.35 Maximum Load Current vs. Temperature (IF=2mA) Typical Turn-Off Time (N=50, TA=25ºC, IL=100mA, IF=5mA) 64.0 0 0.28 0.016 500 0.40 0.45 0.50 0.55 Turn-On (ms) 0.60 0.65 Typical Leakage vs. Temperature Measured Across Pins 3 & 4 (VL=60V) 0.014 20 15 10 5 400 Leakage (µA) Load Current (mA) 25 300 200 0.012 0.010 0.008 0.006 0.004 100 0.002 0 0 0.55 0.65 0.75 0.85 Turn-Off (ms) 0.95 -40 1.05 70 Turn-On (ms) 68 66 64 62 60 58 -40 -20 0 20 40 60 Temperature (ºC) 80 100 0 20 40 60 Temperature (ºC) 80 0 -40 100 Typical Turn-On vs. Temperature (IL=80mA) Typical Blocking Voltage vs. Temperature 72 -20 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 Turn-Off (ms) Device Count (N) 1.255 1.260 1.265 1.270 LED Forward Voltage (V) Typical IF for Switch Operation (N=50, TA=25ºC, IL=400mA) 25 Device Count (N) 15 Device Count (N) 1.250 Typical Blocking Voltage Distribution (N=50, TA=25ºC) 30 20 0 0 Blocking Voltage (VP) 35 Device Count (N) 20 30 Typical On-Resistance Distribution (N=50, TA=25ºC, IL=400mA, IF=1mA) 25 Device Count (N) Device Count (N) 25 Typical LED Forward Voltage Drop (N=50, TA=25ºC, IF=5mA) IF=5mA IF=10mA -40 -20 0 20 40 60 Temperature (ºC) 80 100 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 -40 -20 0 20 40 60 Temperature (ºC) 80 100 Typical Turn-Off vs. Temperature (IL=80mA) IF=5mA IF=10mA -20 0 20 40 60 80 100 Temperature (ºC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 CPC1014N PERFORMANCE DATA* Typical Turn-On vs. LED Forward Current (IL=80mA) Turn-On (ms) IF=20mA 1.4 1.3 1.2 IF=10mA IF=5mA IF=2mA 1.1 1.0 -40 0 20 40 Time 80 0.5 0.4 0.3 0.2 0.1 0 0.36 0 LED Forward Current (mA) 10 15 20 25 30 35 40 LED Forward Current (mA) Typical IF for Switch Operation vs. Temperature (IL=200mA) Typical IF for Switch Dropout vs. Temperature (IL=200mA) 5 10 15 20 25 30 35 40 45 50 0.36 5 45 50 IF=5mA IF=10mA 0.7 Steady State 0.6 0.5 0.4 -40 -20 0 20 40 60 80 100 Temperature (ºC) Load Current (mA) -0.2 -0.1 0.0 0.1 Load Voltage (V) 0.2 0.3 0.28 0.24 0.20 0.32 0.28 0.24 0.20 0.16 -20 0 20 40 60 Temperature (ºC) 80 100 10s 100s -40 -20 0 20 40 60 Temperature (ºC) 80 100 Energy Rating Curve (IF=2mA) Typical Load Current vs. Load Voltage (IF=2mA) 500 400 300 200 100 0 -100 -200 -300 -400 -500 -0.3 0.32 0.16 -40 0.3 Load Current (mA) 0.6 0 100 Typical On-Resistance vs. Temperature (IL=200mA) 0.8 On-Resistance (Ω) 60 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 LED Current (mA) 0.9 -20 LED Current (mA) LED Forward Voltage (V) IF=50mA 1.5 Typical Turn-Off vs. LED Forward Current (IL=80mA) 0.7 Turn-Off (ms) Typical LED Forward Voltage Drop vs. Temperature 1.6 1100 1000 900 800 700 600 500 400 300 200 100 0 10μs 100μs 1ms 10ms 100ms Time 1s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01 CPC1014N MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Pb Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. e3 RoHS 2002/95/EC Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOP Package Recommended PCB Land Pattern 4.089 ± 0.203 (0.161 ± 0.008) 0.200 ± 0.025 (0.008 ± 0.001) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.150 ± 0.003) 0.60 (0.0217) 0.432 ± 0.127 (0.017 ± 0.005) 1.02 ± 0.025 (0.040 ± 0.001) Pin 1 2.54 Typ (0.100 Typ) 5.60 (0.2205) 1.30 (0.0512) 2.54 (0.10) 2.184 Max (0.086 Max) 0.0254 - 0.102 (0.001 - 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) Pin 1 B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1014N-R01 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/24/08 5