AZETTLER AZ850P2-5 Microminiature polarized relay Datasheet

AZ850
MICROMINIATURE
POLARIZED RELAY
FEATURES
• Microminiature size: Height: .197 inches (5 mm);
Length: .551 inches (14 mm); Width: .354 inches (9 mm)
• High sensitivity, 79 mW pickup
• Monostable and bistable (latching) single coil and two
coil versions available
• Meets FCC Part 68.302 1500 V lightning surge
• DIP terminal layout, fits 10 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• UL, CUR file E43203
CONTACTS
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Max.
Max.
Max.
Max.
Rated Load
UL
switched power: 30 W or 62.5 VA
switched current: 1 A
switched voltage: 220 VDC or 250 VAC
carry current:
2A
1 A at 30 VDC resistive
0.5 A at 125 VAC resistive
Material
Silver palladium; gold clad
Resistance
< 50 milliohms initially
COIL (Polarized)
Power
At Pickup Voltage
(typical)
Single side stable:
79–169 mW
Bistable (latching) single coil: 56–84 mW
Bistable (latching) two coil: 113–169 mW
Max. Continuous
Dissipation
875 mW at 20°C (68°F) ambient
Temperature Rise
18°C (32°F) at nominal coil voltage
Temperature
Max. 105°C (221°F)
NOTES
1.
2.
3.
4.
All values at 20°C (68°F).
Relay has fixed coil polarity.
Relay may pull in with less than “Must Operate” value.
Relay adjustment may be affected if undue pressure is exerted
on relay case.
5. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
6. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 108
2 x 105 at 1 A, 30 VDC, resistive
1 x 105 at 0.5 A, 125VAC, resistive
Operate Time (typical)
2 ms at nominal coil voltage
Release Time (typical)
1 ms at nominal coil voltage
(with no coil suppression)
Set Time
(bistable versions)
2 ms at nominal coil voltage (typical)
Reset Time
(bistable versions)
2 ms at nominal coil voltage (typical)
Dropout
Greater than 10% of nominal coil voltage
Capacitance
Contact to contact: 0.4 pF
Contact set to contact set: 0.2 pF
Contact to coil: 0.9 pF
Dielectric Strength
(at sea level)
1000 Vrms between contact sets
1000 Vrms across contacts
1000 Vrms contact to coil
Meets FCC part 68.302 1500 V lightning
surge
Insulation Resistance
1000 megohms min. at 25°C, 500 VDC,
50% RH
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
.130" DA at 10–55 Hz
Shock
50 g
Enclosure
LCP
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
250°C (482°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
1.5 grams
6/20/05 W
AZ850
RELAY ORDERING DATA
SINGLE SIDE STABLE
COIL SPECIFICATIONS
Nominal Coil
VDC
3
Must Operate
VDC
2.3
Max Continuous
VDC
7.5
ORDER NUMBER
Coil Resistance
± 10%
64.3
AZ850–3
4.5
3.4
11.25
145.2
AZ850-4.5
5
3.8
12.5
178
AZ850–5
6
4.5
15.0
257
AZ850–6
9
6.8
22.5
579
AZ850–9
12
9.0
30.0
1,028
AZ850–12
24
18.0
48.0
2,880
AZ850–24
48
36.0
80.0
7,680
AZ850–48*
BISTABLE (LATCHING) SINGLE COIL
COIL SPECIFICATIONS
Nominal Coil
VDC
3
Must Operate
VDC
2.3
Max Continuous
VDC
8.7
ORDER NUMBER
Coil Resistance
± 10%
90
AZ850P1–3
4.5
3.4
13.0
203
AZ850P1–4.5
5
3.8
14.5
250
AZ850P1–5
6
4.5
17.4
360
AZ850P1–6
9
6.8
26.1
810
AZ850P1–9
12
9.0
34.8
1440
AZ850P1–12
24
18.0
57.6
3840
AZ850P1–24
BISTABLE (LATCHING) TWO COIL
COIL SPECIFICATIONS
Nominal Coil
VDC
3
Must Operate
VDC
2.3
Max Continuous
VDC VDC
6.0
13.0
ORDER NUMBER
Coil Resistance
Coil I
Coil II
45
45
3.4
5
3.8
6
4.5
12.0
180
180
AZ850P2–6
9
6.8
18.0
405
405
AZ850P2–9
12
9.0
24
720
720
24
18.0
40
1,920
1,920
10.0
102
AZ850P2–3
4.5
102
125
125
AZ850P2–4.5
AZ850P2–5
AZ850P2–12
AZ850P2–24
*Not UL Approved
MECHANICAL DATA
PC BOARD LAYOUT
.354
[9.00]
.551
[14.0]
.010
[0.25]
.197
[5.0]
.027
[0.69]
4x.100
[2.54]
10x.138
[3.5]
10x.020
[0.51]
10 x .032
[0.81]
10x.010
[0.25]
.300
[7.63]
.300
[7.62]
WIRING DIAGRAMS
SINGLE SIDE STABLE
1
2
3
4
BISTABLE (LATCHING) TWO COIL
5
1
2
3
4
5
Set Coil
(+)
(+)
Stripe on top of relay
indicates the position
of pins 1 & 10
(-)
(+)
Diagrams show the "reset"
position before energized
with polarity as shown.
9
8
7
6
DEENERGIZED OR RESET CONDITION
Watch for polarity
4 x .100
[2.54]
(-)
(-)
10
.075
[1.90]
10
9
8
7
6
VIEWED TOWARDS TERMINALS
Reset Coil
RESET CONDITION
Watch for polarity
VIEWED TOWARDS TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010"
6/20/05 W
Similar pages