Minibox Metallized Polyester Film Capacitors EPEM Series (5mm Lead Space) MERITEK FEATURES • • • • • • Miniature size Self-healing properties High moisture resistance Good solderability Non-inductive construction Flame-retardant plastic case and epoxy resin (In compliance with UL94V-0) SPECIFICATIONS -40oC to +85 oC 1. Operating temperature: 2. Capacitance range: 0.001μF to 1.5μF ±5%(J), ±10%(K), ±20%(M) 3. Capacitance tolerance: 4. Rated voltage: 5. Dissipation factor: 63VDC/50VAC, 100VDC/63VAC EPEM ≤ 0.8% at 1 KHz and 20oC ≥ 9000MΩ for C ≤ 0.33μF ≥3000M Ω μF for C > 0.33μF 6. Insulation resistance: PART NUMBERING SYSTEM EPEM 103 are constructed with a wound polyethylene terephthalate film dielectric, housed inside a plastic casing, which is sealed using epoxy resin. The leads are constructed with oxygen-free tinned copper wires. EPEM possess self -healing properties and are small in size. They are ideal for automatic insertion. J 2A W 0.1 Meritek Series Capacitance CODE ( pF ) ( nF ) ( μF ) 102 1,000 1 0.001 103 10,000 10 0.01 104 100,000 100 0.1 105 1000 1 Tolerance CODE Tolerance (%) J ±5 K ± 10 M ± 20 d 0.6 Rated Voltage CODE 1J 63VDC 2A 100VDC Tape & Reel / Tape & Ammo available Please contact factory for part number RV DIM. CAP(μF) 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 Dimensions in millimeters (mm) 63VDC/ 50VAC W 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 H 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 Specifications are subject to change without notice. T 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 100VDC/ 63VAC P 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 W 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 H 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 T 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 P 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 rev.6a Minibox Metallized Polyester Film Capacitors EPEM Series (5mm Lead Space) MERITEK Dimensions in millimeters (mm) RV DIM. CAP(μF) 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 63VDC/ 50VAC W 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 H 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5/8.0 6.5/8.0 6.5/8.0 6.5/8.0 8.0 8.0 8.0 8.0 8.0 8.0/9.6 8.0/9.6 8.0/9.6 T 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5/3.2 2.5/3.2 2.5/3.2 2.5/3.2 3.2/5.0 3.2/5.0 5.0 5.0 5.0 5.0/6.0 5.0/6.0 5.0/6.0 Custom values and tolerances available upon request 100VDC/ 63VAC P 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 W 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 H 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5/8.0 6.5/8.0 8.0 8.0 8.0 8.0 8.0/12.0 9.6/12.0 9.6/12.0 9.6/12.0 12.0 12.0 T 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5/3.2 2.5/3.2 5.0 5.0 5.0 5.0 5.0/6.0 6.0 6.0 6.0 6.0 6.0 P 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0