CHENMKO ENTERPRISE CO.,LTD CHBD3004BRMPT SURFACE MOUNT SWITCHING DIODE VOLTAGE 350 Volts CURRENT 225 mAmpere APPLICATION * Ultra high speed switching FEATURE SC-74/SOT-457 * Small surface mounting type. (SC-74/SOT-457) * High speed. (TRR=50 nSec Typ.) * Suitable for high packing density. * Maximum total power disspation is 350mW. * Peak forward current is 625mA. * High voltage capability. (1) (6) 0.95 1.7~2.1 2.7~3.1 0.95 CONSTRUCTION (3) (4) 0.25~0.5 * Silicon epitaxial planar 1.4~1.8 MARKING * D6P 0.935~1.3 0.08~0.2 0~0.15 0.3~0.6 CIRCUIT 6 4 1 3 2.6~3.0 Dimensions in millimeters SC-74/SOT-457 MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL CHBD3004BRMPT UNITS Maximum Recurrent Peak Reverse Voltage VRRM 350 Volts Maximum RMS Voltage VRMS 300 Volts Maximum DC Blocking Voltage VDC 212 Volts IO 225 mAmps Maximum Average Forward Rectified Current Peak Forward Surge Current @TP= 1uSec @TP= 1Sec IFSM 4.0 1.0 Amps Typical Junction Capacitance between Terminal (Note 1) CJ 5.0 pF Maximum Reverse Recovery Time (Note 2) TRR 50 nSec Typical Thermal Resistance R Operation and Storage Temperature Range JA TJ,TSTG 357 -65 to +150 o C/W o C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS SYMBOL Reverse Breakdown Voltage at IR= 150uA Maximum Instantaneous Forward Voltage at IF= 100mA Maximum Average Reverse Current at VR= 240V @TA= 25OC CHBD3004BRMPT UNITS BVR 350 Min. VF 1.0 Volts 100 nAmps 100 uAmps IR @TA= 150OC NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 0 volts. 2. Measured at applied froward current of 30mA ,reverse current of 30mA ,RL=100 3. ESD sensitive product handling required. Volts 2004-09 and recovery to IRR=3mA. RATING CHARACTERISTIC CURVES ( CHBD3004BRMPT ) IF, INSTANTANEOUS FORWARD CURRENT (mA) Typical Electrical Characteristics 400 300 200 100 0 100 0 1000 100 Tj = 150°C 10 Tj = 25°C 1.0 0.1 0.01 0 200 400 1200 800 1600 2000 VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Fig. 2 Typical Forward Characteristics, per element TA, AMBIENT TEMPERATURE, (°C) Fig. 1 Power Derating Curve, total package 1.1 1000 Tj = 150°C 100 CT, TOTAL CAPACITANCE (pF) Pd, POWER DISSIPATION (mW) 500 10 Tj = 75°C 1.0 0.1 Tj = 25°C 1.0 0.9 0.8 0.01 0.7 0.001 0 50 100 150 200 250 300 350 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics, per element 0.01 0.1 1.0 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance vs. Reverse Voltage, per element 100