Fairchild DM74ALS273SJ Octal d-type edge-triggered flip-flop with clear Datasheet

Revised February 2000
DM74ALS273
Octal D-Type Edge-Triggered Flip-Flop with Clear
General Description
Features
These monolithic, positive-edge-triggered flip-flops utilize
TTL circuitry to implement D-type flip-flop logic with a direct
clear input.
■ Switching specifications at 50 pF
Information at the D inputs meeting the setup requirements
is transferred to the Q outputs on the positive-going edge
of the clock pulse. Clock triggering occurs at a particular
voltage level and is not directly related to the transition time
of the positive-going pulse. When the clock input is at
either the HIGH or LOW level, the D input signal has no
effect at the output.
■ Buffer-type outputs and improved AC offer significant
advantage over DM74LS273.
■ Switching specifications guaranteed over full temperature and VCC range
■ Advanced oxide-isolated, ion-implanted Schottky TTL
process
■ Functionally
DM74LS273.
and
pin-for-pin
compatible
with
Ordering Code:
Order Number
Package Number
DM74ALS273WM
M20B
DM74ALS273SJ
DM74ALS273MSA
DM74ALS273N
M20D
Package Description
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
MSA20
20-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide
N20A
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
© 2000 Fairchild Semiconductor Corporation
DS006216
www.fairchildsemi.com
DM74ALS273 Octal D-Type Edge-Triggered Flip-Flop with Clear
April 1984
DM74ALS273
Function Table
Logic Diagram
(Each Flip-Flop)
Inputs
Output
Clear
Clock
D
L
X
X
Q
L
H
↑
H
H
H
↑
L
L
H
L
X
Q0
L = LOW State
H = HIGH State
X = Don’t Care
↑ = Positive Edge Transition
Q0 = Previous Condition of Q
www.fairchildsemi.com
2
Supply Voltage
7V
Input Voltage
7V
0°C to +70°C
Operating Free Air Temperature Range
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
−65°C to +150°C
Storage Temperature Range
Typical θJA
N Package
60.0°C/W
M Package
79.0°C/W
Recommended Operating Conditions
Symbol
Parameter
Min
Nom
Max
Units
4.5
5
5.5
V
VCC
Supply Voltage
VIH
HIGH Level Input Voltage
VIL
LOW Level Input Voltage
0.8
V
IOH
HIGH Level Output Current
−2.6
mA
IOL
LOW Level Output Current
fCLK
Clock Frequency
tW(CLK)
Width of Clock Pulse
tW
Width of Clear Pulse
tSU
Data Setup Time (Note 2)
2
V
0
24
mA
35
MHz
HIGH
14
ns
LOW
14
ns
10
ns
LOW
10↑
Clear Inactive
ns
15↑
tH
Data Hold Time
0↑
TA
Free Air Operating Temperature
0
ns
°C
70
Note 2: The (↑) arrow indicates the positive edge of the Clock is used for reference.
Electrical Characteristics
over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25°C.
Symbol
Parameter
Conditions
Min
VIK
Input Clamp Voltage
VCC = 4.5V, II = −18 mA
VOH
HIGH Level
VCC = 4.5V
IOH = −2.6 mA
2.4
Output Voltage
VCC = 4.5V to 5.5V
IOH = −400 µA
VCC − 2
VOL
LOW Level
Output Voltage
VCC = 4.5V
Typ
Max
Units
−1.5
V
3.3
V
V
IOL = 12 mA
0.25
0.4
IOL = 24 mA
0.35
0.5
V
0.1
mA
V
II
Input Current @ Maximum Input Voltage VCC = 5.5V, VIH = 7V
IIH
HIGH Level Input Current
VCC = 5.5V, VIH = 2.7V
20
µA
IIL
LOW Level Input Current
VCC = 5.5V, VIL = 0.4V
−0.2
mA
IO
Output Drive Current
VCC = 5.5V
VO = 2.25V
−112
mA
ICC
Supply Current
VCC = 5.5V
Outputs HIGH
11
20
mA
Outputs OPEN
Outputs LOW
19
29
mA
Min
Max
Units
−30
Switching Characteristics
over recommended operating free air temperature range.
Symbol
Parameter
Conditions
fMAX
Maximum Clock Frequency
VCC = 4.5V to 5.5V
tPHL
Propagation Delay Time
RL = 500Ω
HIGH-to-LOW Level Output
CL = 50 pF
tPLH
To
35
Propagation Delay Time
LOW-to-HIGH Level Output
tPHL
From
Propagation Delay Time
HIGH-to-LOW Level Output
3
MHz
Clear
Any Q
4
18
ns
Clock
Any Q
2
12
ns
Clock
Any Q
3
15
ns
www.fairchildsemi.com
DM74ALS273
Absolute Maximum Ratings(Note 1)
DM74ALS273
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
Package Number M20B
www.fairchildsemi.com
4
DM74ALS273
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M20D
5
www.fairchildsemi.com
DM74ALS273
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide
Package Number MSA20
www.fairchildsemi.com
6
DM74ALS273 Octal D-Type Edge-Triggered Flip-Flop with Clear
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N20A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
7
www.fairchildsemi.com
Similar pages