CYSTEKEC CSMA4005XSA 1.0amp. surface mount glass passivated type rectifier Datasheet

CYStech Electronics Corp.
Spec. No. : C327SA
Issued Date : 2003.04.04
Revised Date :
Page No. : 1/3
CSMA400XSA Series
1.0Amp. Surface Mount Glass Passivated Type Rectifiers
Features
• For surface mounted application
• Low forward voltage drop and low leakage current
• High current capability
• Easy pick and place
• High surge current capability
• Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 Utilizing Flame
Retardant Epoxy Molding Compound.
• High temperature soldering: 250°C/10 seconds at terminals
• Exceeds environmental standards of MIL-S-19500/228
Mechanical Data
• Case: SMA/DO-214AC Molded Plastic.
• Terminals: Solder plated. Solderable per MIL-STD-750 Method
• Polarity: Indicated by cathode band.
• Packaging: 12mm tape per EIA STD RS-481.
• Weight: 0.06 gram, 0.0018 ounce
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive
or inductive load. For capacitive load, derate current by 20%.
CSMA CSMA CSMA CSMA CSMA CSMA CSMA
Type Number
Units
4001 4002 4003 4004 4005 4006 4007
Maximum Recurrent Peak Reverse Voltage
50
100
200
400
600
800 1000
V
Maximum RMS Voltage
35
70
140
280
420
560
700
V
Maximum DC Blocking Voltage
50
100
200
400
600
800 1000
V
Maximum Average
1
A
Forward Rectified Current @TL=110°C
Peak Forward Surge Current, 8.3ms Single
30
A
Half Sine-wave Superimposed on
Rated Load(JEDEC method)
Maximum Instantaneous
1.1
V
Forward Voltage @ 1.0A
Maximum DC Reverse Current at
5(@Ta=25°C)
uA
Rated DC Blocking Voltage
50(@Ta=125°C)
Maximum Reverse Recovery Time (Note 1)
1.8
uS
Typical Junction Capacitance (Note 2)
12
pF
Operating Temperature Range Tj
-55 to +150
°C
Storage Temperature Range Tstg
-55 to +150
°C
Note1: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
Note2: Measured at 1 MHz and Applied VR=4.0Volts
CSMA400XSA
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C327SA
Issued Date : 2003.04.04
Revised Date :
Page No. : 2/3
Characteristic Curves
CSMA400XSA
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C327SA
Issued Date : 2003.04.04
Revised Date :
Page No. : 3/3
SMA/DO-214AC Dimension
Marking Code:
C
A
B
Device 4001
Code
A1
4002
A2
4003
A3
Device 4005
Code
A5
4006
A6
4007
A7
4004
A4
D
SMA Plastic Surface
Mounted Package
CYStek Package Code:SA
E
G
F
*:Typical
Inches
Min.
Max.
0.177
0.185
0.094
0.110
0.012(typ)
0.150
0.165
DIM
A
B
C
D
Millimeters
Min.
Max.
4.4
4.8
2.4
2.8
0.3(typ)
3.8
4.2
DIM
E
F
G
-
Inches
Min.
Max.
0.060
0.067
0.04(typ)
0.04(typ)
-
Millimeters
Min.
Max.
1.5
1.7
1.0(typ)
1.0(typ)
-
Notes : 1.Controlling dimension : millimeters.
2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
3.If there is any question with packing specification or packing method, please contact your local CYStek sales office.
Material :
• Lead : 42 Alloy ; solder plating
• Mold Compound : Epoxy resin family, flammability solid burning class:UL94V-0
Important Notice:
• All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek.
• CYStek reserves the right to make changes to its products without notice.
• CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
• CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
CSMA400XSA
CYStek Product Specification
Similar pages