CHENMKO ENTERPRISE CO.,LTD CHFMA10PT SURFACE MOUNT Dual Digital Silicon Transistor VOLTAGE 50 Volts CURRENT 100 mAmpere APPLICATION * Switching circuit, Inverter, Interface circuit, Driver circuit. FEATURE * Small surface mounting type. (SC-74A) SC-74A * High current gain. * Suitable for high packing density. * * * * Low colloector-emitter saturation. High saturation current capability. tow CHDTA123J chips in apackage. Built in bias resistor(R1=2.2kΩ, Typ. ) (1) (5) 0.95 1.7~2.1 2.7~3.1 0.95 (2) (3) 0.25~0.5 1.4~1.8 0.935~1.3 0.08~0.2 0~0.15 0.3~0.6 CIRCUIT 3 4 R1 R2 5 2.6~3.0 R1 R2 2 1 SC-74A Dimensions in millimeters LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC Supply voltage − -50 V VIN Input voltage -12 +5 V − -100 − -100 − 300 mW IO DC Output current IC(Max.) Tamb ≤ 25 OC, Note 1 mA PTOT Total power dissipation TSTG Storage temperature −55 +150 O C TJ Junction temperature − 150 O C Note 1. Transistor mounted on an FR4 printed-circuit board. 2004-04 RATING CHARACTERISTIC ( CHFMA10PT ) CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT VIoff) Input off voltage IO=-100uA; VCC=-5.0V − − V VI(on) Input on voltage IO=-5.0mA; VO=-0.3V − − -1.1 V VO(on) Output voltage IO=-5mA; II=-0.25mA − -0.1 -0.3 V II Input current VI=-5V − − -3.6 mA IC(off) Output current VI=0V; VCC=-50V − − -0.5 uA hFE DC current gain IO=-10mA; VO=-5.0V 80 − − R1 Input resistor 1.54 2.2 2.86 17 21 26 R2/R1 Resistor ratio Note 1.Pulse test: tp≤300uS; δ≤0.02. -0.5 KΩ RATING CHARACTERISTIC CURVES ( CHFMA10PT ) Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) VO=−0.3V −50 OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) −100 −20 −10 −5 −2 Fig.2 Output current vs. input voltage (OFF characteristics) Ta=−40°C 25°C 100°C −1 −500m −200m −100m −100µ −200µ −500µ −1m −2m −10m −5m −1m −500µ −100µ −50µ −20µ −10µ −5µ Fig.3 DC current gain vs. output current DC CURRENT GAIN : GI 200 VO=−5V Ta=100°C 25°C −40°C 100 50 20 10 5 2 1 −100µ −200µ −500µ −1m −2m −5m −10m −20m −50m −100m OUTPUT CURRENT : IO (A) −1.0 −1.5 −2.0 −2.5 −3.0 Fig.4 Output voltage vs. output current −1 OUTPUT VOLTAGE : VO(on) (V) 1k −0.5 INPUT VOLTAGE : VI(off) (V) OUTPUT CURRENT : IO (A) 500 Ta=100°C 25°C −40°C −200µ −2µ −1µ 0 −5m −10m −20m −50m −100m VCC=−5V −2m lO/lI=20 −500m Ta=100°C 25°C −40°C −200m −100m −50m −20m −10m −5m −2m −1m −100µ −200µ −500µ −1m −2m −5m −10m −20m −50m −100m OUTPUT CURRENT : IO (A)