ETC2 AAP20M000000GHJ18H Microprocessor crystals / resistance weld Datasheet

HC49UP Low Profile Surface Mount
MICROPROCESSOR CRYSTALS / RESISTANCE WELD
SPECIFICATION
Frequency Range
3.579545 to 60.000 MHz
Frequency Tolerance
± 50 PPM ( Standard )
Frequency Stability @ 25EC
± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF or Series
Shunt Capacitance
7pF Maximum
Drive Lavel
1mWatt Maximum
Aging
±5 PPM per year Maximum
Dimensions in mm
Recommended Pad Layout
HC49UP Part Number Break Down
AA P 20M000000 F L E 18 H
(Frequency)
CL
MODE
HOLDER
TOLERANCE STABILITY
TEMP. RANGE OPTIONS
AA= Fundamental
BA= 3rd Overtone
I = 3.5 H
P = 5.0 H
B= ±10 PPM
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
E= 0 to 70EC
H= -20 to 70EC
J= -40 to 85EC
H= ±20 PPM
J = ±30 PPM
L= ±50 PPM
N= ±100 PPM
A= Standard
H= Tape & Reel
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: [email protected]
C-3
Similar pages