7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER 5 4 3 2 20 REVISION 2266077 -2 DESCRIPTION A 2266077 -5 FINE CRIMP HEIGHT ADJUST A A NON-CRIMP HEIGHT ADJUST 2266077 -7 A FINE CRIMP HEIGHT ADJUST A CONVERT TO PNEUMATIC SERVO LATCH PLATE SMART APPLICATOR SERVO LATCH PLATE FINE CRIMP HEIGHT ADJUST 2266077 -6 7- 2266077 -7 APPLICATOR STYLE CONVERSION CHART FEED TYPE 4 SERVO LATCH PLATE NONE CRIMP TOOLING KIT 4 12 PNEUMATIC FEED - - - - 2119951-1 - 2161326-1 2119950-1 - 8- 2266077 -5 - 8- 2266077 -4 1338685-1 5-18022-5 - - - - - - 2119641-1 - - - 1901094-3 - - - - - - - - - 2168400-6 - (QUANTITY 2) - - 2119799-1 - 6 - - 2063440-1 - - - - - - - - - - - - - - WIRE INSUL - TYPE - F F 4.47 mm [.176] 5.54 mm [.218] APPLICATOR INSTRUCTIONS 408-10389 - TE TERMINAL TERMINAL DATA: WIRE STRIP LENGTH 6.73-7.54 mm [.265-.297 IN] C - TE CRIMP SPECIFICATION - ULTRA FAST PLUS FULLY INSULATED FASTON TERMINAL NAME: TERMINAL APPLICATION SPECIFICATION 114-2123 TE TERMINAL 2-520405-2 C1__DWG_PN_1_0 C1__DWG_PN_1_1 2-520403-2 C1__DWG_PN_1_2 - - 1.52-3.43 mm [.060-.135 IN] - TERMINALS APPLIED - INSULATION DIAMETER RANGE n - - - - - 6 - 14 TE TERMINAL 2-521360-2 2-520401-2 C1__DWG_PN_2_0 C1__DWG_PN_2_1 C1__DWG_PN_2_2 TE TERMINAL 2-521055-2 C1__DWG_PN_3_0 - TE TERMINAL - C1__DWG_PN_4_0 - C1__DWG_PN_3_1 2-521361-2 - C1__DWG_PN_3_2 - WIRE SIZE 18 AWG 20 OR 22 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 1.78+/-0.05 [.070+/-.002] 1.65+/-0.05 [.065+/-.002] CRIMP HEIGHT REFERENCE SETTING 9 6.1 W1__DWG_CRIMP_HT_1 7.5 W1__DWG_CRIMP_HT_2 - 13 W1__FA_SETTING_1 W1__FA_SETTING_2 .12 IN [3.05mm] .12 IN [3.05mm] - W1__FA_SETTING_1 - W1__FA_SETTING_2 - B 1 RECOMMENDED SPARE PARTS 2 GREASE BEARING SURFACES LIGHTLY - *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. - 6 - 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 - APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8SERVO FEED WITH "NON-CRIMP HEIGHT ADJUST": 8- - 2266077 -4 2266077 -5 2266077 -6 - 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 7 8 9 10 11 A 12 13 14 APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 62 FOR -6 ONLY APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 37 GREASE THREADS, GROOVE AND O-RING ON ITEMS 35 & 242. & 242. - 1 - SPARE FEED CAM STORAGE LOCATION REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. - TO CONVERT THE APPLICATOR TO A NON-CARRIER CUTTING STYLE, REMOVE ITEM 13 AND ATTACH TO THE LOCATION ON THE BACK SIDE OF THE HOUSING. REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. WHEN ASSEMBLING A NON CRIMP HEIGHT ADJUST APPLICATOR (-6) USE SHIMS FROM ITEM 260 TO ACHIEVE A NOMINAL SHIM HEIGHT OF TO CHECK CRIMP HEIGHT, CRIMP SOLDER ( n .12 IN [3.05mm] 60/40 SOLID CORE AND MEASURE AT CENTER OF SLUG. AMP 4805 REV 31MAR2000 - - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. - - & 252. MAGNET, ITEM 166 MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. 4.02 . A 66 P LTR DESCRIPTION DATE RELEASED DWN APVD BH 31DEC2013 GB - - SIZE REVISIONS DIST PART NUMBERS REQUIRED - CRIMP 1 A - APPLICATOR DATA LOC SET UP GAUGE 2119599-1 ALL RIGHTS RESERVED. PART NUMBER D 6 1 1 1 1 -77 -7 1 1 1 -6 1 1 1 1 -5 1 2119957-2 8-21084-0 2119640-1 2079988-1 2119641-1 2119798-1 1-22279-3 2119758-1 2119082-9 -2 PART NO 1 1 1 1 1 1 - TEC Standard Metric Part Template APPLICATOR SHIM PACK O-RING, .676 ID, .070 DIA. MAT. PUSH ROD, AIR FEED BUSHING, LCH5-12, MISUMI FEED CAM, AIR FEED DETENT PIN SPRING, COMPRESSION RAM, AMP STYLE, SIDE FEED, NON-ADJ. CAM, SNAIL, INSULATION ADJUSTMENT DESCRIPTION 1 8-21084-0_GATD 1 2119640-1 1 2079988_GATD 1 2119641-1 1 2119798-1 1 1-22279-3_SIMP 1 2119758 1 2119082-9 260 252 250 249 248 247 246 245 244 - 1 - 1 1 - ITEM NO 1 1 1 1 - 1 1 1 1 1 1 - mm MATERIAL - 1 -2 PART NO - - 1 REF - 1 - 1 1 1 1 - 1 1 1 - - - 1 - 1 2 - 1 1 1 2 2079764-1 2119083-1 7-18023-7 2168400-6 2063440-1 356885-4 2119740-2 1901094-3 21045-3 994969-1 994970-2 240638-1 3-23627-7 2119799-1 SEE NOTE 4 1633743-1 1-22281-8 1-690438-0 2168083-6 2168083-3 2168083-1 455888-5 240641-9 2119956-1 1-18028-4 2119740-1 2168078-1 2119793-1 992763-5 2-18032-5 2079383-4 5-18022-5 462427-2 2168400-1 2168083-9 18023-9 2119652-1 2119653-1 1-2119656-9 2119370-1 2079383-7 2119645-1 2119957-1 2119644-2 2119085-1 2119092-1 2161328-1 2161336-1 22281-9 356835-1 240792-1 684042-4 980371-4 2161335-2 2168083-2 1-18028-2 2119533-1 463460-3 803925-2 1-2168083-1 469542-3 2119862-2 2119806-1 3-22280-3 1-454766-4 808025-3 690468-6 3-238009-6 1803130-1 808830-2 1 2 1 1 REF REF REF - - - - - - - - - 1 1 - 1 REF REF - 1 1 1 1 1 1 1 - 1 - 1 1 - 1 - 1 1 1 1 - 1 1 1 1 - - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 - 1 1 1 - 1 1 1 1 1 - 1 - 1 - - 1 1 1 - - 1 2 - - - 2 2 - - 1 2 2 - 1 - 2 2 1 - - 2 2 1 - - 3 2 1 - 1 3 2 1 2 1 - 2 1 2 - 3 2 - 2 1 1 2 - 2 1 1 2 1 1 1 1 2 6 1 1 1 1 6 1 1 1 1 6 1 1 1 1 6 1 1 1 1 - 1 1 1 - 1 - 1 - 1 -6 -5 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: & 4 of 4) 1 -77 -7 ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 - 1 1 2266077_SKELETON 1 2119957-2 - 1 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 SHCS, LOW HEAD, RoHS, M5 X 16 AIR FEED MODULE STOP, SHEAR TAG,IDENTIFICATION SPACER, FEEDER RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER PIN, RETAIN, GRVD, 3/16 X .854 HOLDER,FEED FINGER, AF MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM SPRING, COMPRESSION FRONT STRIP GUIDE SCR, SKT HD CAP, RoHS, M5 X 65 SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M3 X 8.0 SPACER, CRIMPER SPACER DOCUMENTATION PACKAGE WASHER, FLAT, REG M3 TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 SCR, SET, FLT POINT M5 X 20.0 SCR, BHSC, RoHS (M4 X 8) SCR, HEX HD CAP, M4 X 6.0 FINGER, FEED SHCS, LOW HEAD, RoHS, M4 X 12 SCR, SKT HD CAP, RoHS, M4 X 20 SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM, AMP STYLE, SIDE FEED SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION FA HEAD, ATLANTIC STYLE BOLT, ADJUSTMENT HEX HEAD, FLANGED, M5 x 8mm LONG PLATE, REAR STRIP GUIDE SPRING, COMPRESSION LEVER, DRAG RELEASE DRAG, TERMINAL GUIDE, STRIP, FRONT SCR, SKT HD SHLDR 5.0 DIA X 6.0 SHEAR PLATE, REAR SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED HOLD DOWN, TERMINAL GUIDE, CARRIER SCRAP SCR, SKT HD CAP, RoHS, M3 X 6 REAR FLOATING SHEAR SHEAR HOLDER, REAR INSERT, SHEAR SPRING, COMPRESSION ANVIL, INSULATION ANVIL, SAND-BLASTED 16-14 DEPRESSOR SHEAR, REAR BLOCK, FL CRIMPER SPACER CRIMPER, INSULATION FASTON CRIMPER, SEMI FLAT 16-14 DWN 18OCT2013 CHK 18OCT2013 APVD 18OCT2013 BOB HIGMAN G.BAILEY M.CLIFFORD NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 2 2168400-6 1 2063440-1 1 356885-4 1 2119740-2 .. 1 1901094-3 2 21045-3 1 994969-1_GATD 1 COUNTER_994970 1 240638 1 3-23627-7 1 2119799 1 1901689_EMPTY_OCEAN_SF .. 1 1633743-1 1 1-22281-8 1 1-690438-0 1 2168083-6 1 2168083-3 6 2168083-1 1 455888-5 1 240641-9 1 2119956-1 2 1-18028-4 1 2119740-1 2 2168078-1 1 2119793 3 992763-5 2 2-18032-5 1 2079383-4 1 5-18022-5 1 462427-2 2 2168400-1 2 2168083-9 3 18023-9 1 2119652 1 2119653 1 1-2119656-9 1 2119370 1 2079383-7 1 2119645 1 2119957-1 1 2119644-2 1 2119085 1 2119092-1 1 2161328 1 2161336-1 2 SIMP_22281-9 1 356835-1 1 240792-1 1 684042-4 1 980371-4 1 2161335-2 1 2168083-2 1 1-18028-2 1 2119533 1 463460_HOLD_DOWN-3 1 803925-2 2 1-2168083-1 1 469542-3 1 2119862-2 1 2119806 1 SIMP_3-22280-3 .. 1 ITEM_10 1 1-454766-4 1 808025-3 1 690468-6 .. 1 ITEM_5 1 3-238009-6 1 1803130-1 .. 1 ITEM_2 1 808830-2 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 7-18023-7 243 242 241 240 238 237 213 198 172 166 164 163 137 136 135 133 121 96 93 84 83 82 81 71 68 67 66 63 62 61 60 59 56 54 53 49 48 47 46 44 41 40 39 38 37 35 32 29 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 10 9 8 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2119083 DESCRIPTION PRODUCT SPEC - 1 2079764 Ocean Side Feed Applicator - DRAWING NO 2266077 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV A D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 1 REVISIONS DIST 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - FEED TYPE 6 6 37 62 40 D 247 38 246 39 PNEUMATIC 250 2 249 260 44 7 252 245 35 244 7 63 53 A 238 6 2 2 2 2 243 166 8 242 2 6 81 163 18 59 82 136 1 137 C D 1 172 3 C 1 56 4 41 SERVO LATCH PLATE 240 133 4 135 15 198 83 A 96 11 66 241 67 24 A 121 SERVO FEEDER NOT INCLUDED B 164 12 2 117 REF 13 237 213 17 19 10 B 83 20 16 21 23 22 14 26 54 25 CAM POSITION 30mm STROKE 27 61 83 68 29 93 32 46 8 60 9 84 248 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 ATLANTIC VERSION 40mm STROKE AIR FEED AMP 4805 REV 31MAR2000 DIMENSIONS: Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 18OCT2013 CHK 18OCT2013 APVD 18OCT2013 BOB HIGMAN G.BAILEY M.CLIFFORD TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2266077 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 6 5 4 3 2 20 SET UP GAUGE 2119599-1 ALL RIGHTS RESERVED. PART NUMBER REVISION 2- 2266077 -2 DESCRIPTION A 2- 2266077 -5 2- 2266077 -7 SERVO LATCH PLATE SMART APPLICATOR SERVO LATCH PLATE FINE CRIMP HEIGHT ADJUST A CONVERT TO PNEUMATIC FINE CRIMP HEIGHT ADJUST A 7- 2266077 -7 FEED TYPE FINE CRIMP HEIGHT ADJUST A APPLICATOR STYLE CONVERSION CHART NONE CRIMP TOOLING KIT 4 PNEUMATIC FEED - - - 2119951-1 - 2161326-1 8- 2266077 -5 - 2119950-1 8- 2266077 -4 1338685-1 - 5-18022-5 - - - - - 1901094-3 - 2119641-2 - - - - 2168400-6 - 2119799-1 - (QUANTITY 2) - - - - - - F F 5.54 mm [.218] APPLICATOR INSTRUCTIONS 408-10389 TE TERMINAL WIRE STRIP LENGTH 6.73-7.54 mm [.265-.297 IN] TERMINAL APPLICATION SPECIFICATION 114-2123 TERMINALS APPLIED 13 n INSULATION DIAMETER RANGE 1.52-3.43 mm [.060-.135 IN] - TE TERMINAL C1__DWG_PN_1_0 2-520405-2 2-520403-2 C1__DWG_PN_1_1 C1__DWG_PN_1_2 TE TERMINAL 2-521360-2 2-520401-2 - - - - C1__DWG_PN_2_0 C1__DWG_PN_2_1 C1__DWG_PN_2_2 TE TERMINAL 2-521055-2 2-521361-2 TE TERMINAL C1__DWG_PN_3_0 6 WIRE SIZE 18 AWG 20 OR 22 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 1.78+/-0.05 [.070+/-.002] 1.65+/-0.05 [.065+/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 6.1 7.5 9 6.4 W1__FA_SETTING_1 7.6 W1__FA_SETTING_2 1 B 2 *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. RECOMMENDED SPARE PARTS GREASE BEARING SURFACES LIGHTLY 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8- 2266077 -4 2266077 -5 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 7 8 9 10 11 A 12 13 APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 62 GREASE THREADS, GROOVE AND O-RING ON ITEMS 139 1 & 242. & 152. 1 MAGNET MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. - SPARE FEED CAM STORAGE LOCATION REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. - TO CONVERT THE APPLICATOR TO A NON-CARRIER CUTTING STYLE, REMOVE ITEM 13 AND ATTACH TO THE LOCATION ON BACK SIDE OF THE HOUSING. REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. TO CHECK CRIMP HEIGHT, CRIMP SOLDER ( n .12 IN [3.05mm] 60/40 SOLID CORE AND MEASURE AT CENTER OF SLUG. TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. 6 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -77 -27 -25 -22 2119782-1 2119640-1 2079988-1 1-22279-3 2119082-9 2079764-1 2119083-1 PART NO TEC Standard Metric Part Template FINE ADJUST HEAD ASM, PACIFIC STYLE PUSH ROD, AIR FEED BUSHING, LCH5-12, MISUMI SPRING, COMPRESSION CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL DESCRIPTION 1 1 2266077_SKELETON 1 2119782 1 2119640-1 1 2079988_GATD 1 1-22279-3_SIMP 1 2119082-9 1 2079764 1 2119083 251 250 249 246 244 243 242 1 1 1 - 1 - 1 1 1 1 1 1 1 - 1 - 1 - 1 1 - 1 1 1 - 1 - 1 - 1 1 LTR DESCRIPTION DATE SEE SHEET 1 DWN APVD - - THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: mm MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - SCR, SKT HD CAP M3 X 4.0 SHCS, LOW HEAD, RoHS, M5 X 16 AIR FEED MODULE STOP, SHEAR TAG,IDENTIFICATION SPACER, FEEDER RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER O-RING, .801 ID, .070 DIA. MAT. FEED CAM, AIR FEED DETENT PIN SCR, BHSC, RoHS (M4 X 16) SHCS, LOW HEAD, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM, ASIAN STYLE, SIDE FEED BOLT, ADJUSTMENT PIN, RETAIN, GRVD, 3/16 X .854 HOLDER,FEED FINGER, AF MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM SPRING, COMPRESSION FRONT STRIP GUIDE SCR, SKT HD CAP, RoHS, M5 X 65 SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M3 X 8.0 SPACER, CRIMPER SPACER DOCUMENTATION PACKAGE WASHER, FLAT, REG M3 TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 SCR, SET, FLT POINT M5 X 20.0 SCR, HEX HD CAP, M4 X 6.0 FINGER, FEED SCR, SKT HD CAP, RoHS, M4 X 20 SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION HEX HEAD, FLANGED, M5 x 8mm LONG PLATE, REAR STRIP GUIDE SPRING, COMPRESSION LEVER, DRAG RELEASE DRAG, TERMINAL GUIDE, STRIP, FRONT SCR, SKT HD SHLDR 5.0 DIA X 6.0 SHEAR PLATE, REAR SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED HOLD DOWN, TERMINAL GUIDE, CARRIER SCRAP SCR, SKT HD CAP, RoHS, M3 X 6 REAR FLOATING SHEAR SHEAR HOLDER, REAR INSERT, SHEAR SPRING, COMPRESSION ANVIL, INSULATION ANVIL, SAND-BLASTED 16-14 DEPRESSOR SHEAR, REAR BLOCK, FL CRIMPER SPACER CRIMPER, INSULATION FASTON CRIMPER, SEMI FLAT 16-14 PART NO -77 -27 -25 -22 ITEM NO & 2 of 4) 1 1 1 - - 1 1 1 - 1 1 1 1 2 1 1 - 1 2 1 - 1 1 2 - PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 AMP 4805 REV 31MAR2000 1 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 2 1 1 - 1 2 1 - 1 1 2 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - - 1 1 - 1 - 1 - 2 - - - 1 2 - - 1 - 2 - 2 - - - 3 2 - - 1 3 2 - 2 1 3 - W1__FA_SETTING_2 1 2 1 - W1__FA_SETTING_1 2 - 2 - 1 2 1 - 12 1 1 2 - 1 1 1 - 6 1 1 - 1 6 1 - C1__DWG_PN_3_2 1 1 6 - C1__DWG_PN_3_1 1 1 1 - C1__DWG_PN_4_0 1 1 1 - - 1 1 - - 1 1 - 1 REF - - 1 - - - 1 - - - 1 1 - - 1 1 1 - - 1 1 - ULTRA FAST PLUS FULLY INSULATED FASTON TERMINAL NAME: C TE CRIMP SPECIFICATION 2 - 1 - 1 2 - - 1 1 2 - 1 1 1 - 1 - 1 - 1 1 - - TERMINAL DATA: - 1 - 1 REF REF - - 2 1 REF - TYPE - - 1 - - 1 - - 1 1 - - 1 1 - - - - 1 - 4.47 mm [.176] P 7-18023-7 2168400-6 2063440-1 356885-4 2119740-2 1901094-3 21045-3 994969-1 994970-2 240638-1 8-21084-1 2119641-2 2119798-2 2079383-8 2168400-5 2119653-2 2-2119656-0 2119650-1 2119092-2 3-23627-7 2119799-1 SEE NOTE 4 1633743-1 1-22281-8 1-690438-0 2168083-6 2168083-3 2168083-1 455888-5 240641-9 2119956-1 1-18028-4 2119740-1 2168078-1 2119793-1 992763-5 2-18032-5 5-18022-5 462427-2 2168083-9 18023-9 2119652-1 2079383-7 2119645-1 2119957-1 2119644-2 2161328-1 2161336-1 22281-9 356835-1 240792-1 684042-4 980371-4 2161335-2 2168083-2 1-18028-2 2119533-1 463460-3 803925-2 1-2168083-1 469542-3 2119862-2 2119806-1 3-22280-3 1-454766-4 808025-3 690468-6 3-238009-6 1803130-1 808830-2 1 2 - - - 1 - - 2063440-1 - 1 - WIRE INSUL 66 - - - SIZE A PART NUMBERS REQUIRED D CRIMP REVISIONS DIST - - APPLICATOR DATA LOC 1 DWN 18OCT2013 CHK 18OCT2013 APVD 18OCT2013 BOB HIGMAN G.BAILEY M.CLIFFORD NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 1 356885-4 1 2119740-2 .. 1 1901094-3 2 21045-3 1 994969-1_GATD 1 COUNTER_994970 1 240638 1 8-21084-1_GATD 1 2119641-2 1 2119798-2 1 2079383-8 2 2168400-5 1 2119653-2 1 2-2119656-0 1 2119650 1 2119092-2 1 3-23627-7 1 2119799 1 1901689_EMPTY_OCEAN_SF .. 1 1633743-1 1 1-22281-8 1 1-690438-0 1 2168083-6 1 2168083-3 6 2168083-1 1 455888-5 1 240641-9 1 2119956-1 2 1-18028-4 1 2119740-1 2 2168078-1 1 2119793 3 992763-5 2 2-18032-5 1 5-18022-5 1 462427-2 2 2168083-9 3 18023-9 1 2119652 1 2079383-7 1 2119645 1 2119957-1 1 2119644-2 1 2161328 1 2161336-1 2 SIMP_22281-9 1 356835-1 1 240792-1 1 684042-4 1 980371-4 1 2161335-2 1 2168083-2 1 1-18028-2 1 2119533 1 463460_HOLD_DOWN-3 1 803925-2 2 1-2168083-1 1 469542-3 1 2119862-2 1 2119806 1 SIMP_3-22280-3 .. 1 ITEM_10 1 1-454766-4 1 808025-3 1 690468-6 .. 1 ITEM_5 1 3-238009-6 1 1803130-1 .. 1 ITEM_2 1 808830-2 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2063440-1 241 240 238 237 213 198 172 166 164 163 152 151 145 144 143 142 141 140 139 137 136 135 133 121 96 93 84 83 82 81 71 68 67 66 63 62 61 59 56 53 49 48 41 40 39 38 32 29 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 10 9 8 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 2 2168400-6 DESCRIPTION PRODUCT SPEC - 1 7-18023-7 Ocean Side Feed Applicator - DRAWING NO 2266077 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV A D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 251 6 62 40 38 FEED TYPE D 145 246 39 140 152 7 2 D 2 2 244 7 139 243 PNEUMATIC 250 2 249 53 238 A 166 8 242 6 63 6 81 163 18 59 136 82 137 C 2 1 172 56 1 3 C 1 4 41 SERVO LATCH PLATE 240 133 4 135 15 198 164 11 A 83 96 24 SERVO FEEDER NOT INCLUDED B 121 117 REF 2 23 66 12 67 241 13 213 A 17 237 19 22 20 10 21 B 83 16 14 26 25 143 68 CAM POSITION 83 27 61 30mm STROKE 29 48 93 32 141 8 144 9 84 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 18OCT2013 CHK 18OCT2013 APVD 18OCT2013 BOB HIGMAN G.BAILEY M.CLIFFORD TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2266077 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV A