CIT A2M1CCP48VDC1.9R Large switching capacity up to 40a Datasheet

A2
RoHS Compliant
26.0 x 26.0 x 24.5 (39.5) mm
Features
•
•
•
•
•
Large switching capacity up to 40A
Small size and light weight
PCB pin and quick connect mounting available
Suitable for automobile and lamp accessories
QS-9000, ISO-9002 Certified Manufacturing
Contact Data*
Contact Arrangement
Contact Rating
1A = SPST N.O.
Contact Resistance
< 30 milliohms initial
1B = SPST N.C.
Contact Material
AgSnO2
1C = SPDT
Maximum Switching Power
630W
1A : 40A @ 14VDC
Maximum Switching Voltage
75VDC
1B : 30A @ 14VDC
Maximum Switching Current
40A
1C : 40A @ 14VDC N.O. and
1C : 30A @ 14VDCN.C.
Coil Data*
Coil Voltage
VDC
Coil Resistance
Ω +/- 10%
Pick Up Voltage Release Voltage
VDC (max)
VDC (min)
Rated
Max
1.6W
1.9W
70% of rated
voltage
10% of rated
voltage
6
7.8
22.5
19
4.20
6
12
15.6
90
75.8
8.40
1.2
24
31.2
360
303.2
16.80
2.4
48
62.4
1440
1212
33.60
4.8
Coil Power
W
Operate Time
ms
Release Time
ms
1.60 or 1.90
7
5
General Data*
Electrical Life @ rated load
100K cycles, average
Mechanical Life
10M cycles, average
Insulation Resistance
100M Ω min. @ 500VDC initial
Dielectric Strength
Coil to Contact 750V rms min. @ sea level initial
Contact to Contact 500V rms min. @ sea level initial
147m/s2 for 11 ms
Shock Resistance
Vibration Resistance
1.5mm double amplitude 10~40Hz
Terminal (Copper Alloy) Strength
8N (quick connect), 4N (PCB pins)
Operating Temperature
-40oC to +125oC
Storage Temperature
-40oC to +155oC
Solderability
260oC for 5 s
Weight
31g
*
Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the
application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise
the operation of the relay.
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
page 1
Specifications and availability subject to change without notice.
A2
Ordering Information
1. Series
A2
1C
S
Q
12VDC
1.6
A2 standard
A2F with mounting flange
A2M with metal bracket
A2S with metal bracket and shroud
2. Contact Arrangement
1A = SPST N.O.
1B = SPST N.C.
1C = SPDT
3. Sealing Option
S = Sealed
C = Dust Cover *not available with A2S
4. Termination
P = PCB Pins *not available with A2S
Q = Quick Connect
5. Coil Voltage
6VDC
12VDC
24VDC
48VDC
6. Coil Power
1.6 = 1.6W
1.9 = 1.9W
7. Coil Suppression
Blank = Standard
D = Diode (1N4005) Cathode on “86” terminal
D1 = Diode (1N4004) Cathode on “86” terminal
R = Resistor (180Ω for 6VDC; 680Ω for 12VDC; 2700Ω for 24VDC)
2D = 2 Diodes (1N4005)
DR = Diode & Resistor Cathode on “86” terminal (1N4005 & 180Ω for 6VDC; 680Ω for 12VDC; 2700Ω for 24VDC)
** Consult factory if other values are needed
Dimensions
Units = mm
26.00
[1.02]
26.00
[1.02]
26.00
[1.02]
[.37]
8.43
[.33]
8.43
[.33]
24.50
[.96]
24.50
[.96]
5.15 TYP
[.20]
2.10 TYP
[.08] 9.50
0.80 TYP
8.38 [.03]
[.33]
10.75 TYP
[.42]
6.35 TYP
[.25]
A2 with PC Pins
page 2
www.citrelay.com
26.00
[1.02]
0.80 TYP
[.03]
A2 with Quick Connect
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
Specifications and availability subject to change without notice.
A2
Dimensions
Units = mm
26.00
[1.02]
15.88
[.63]
Ø5.70
[.22]
26.00
[1.02]
26.70
[1.05]
7.22
[.28]
9.50
[.37]
15.35
[.60]
39.35
[1.55]
11.60 TYP
[.46]
0.80 TYP
[.03]
10.75 TYP
[.42]
6.35 TYP
[.25]
0.80 TYP
[.03]
A2F with Quick Connect
8.35
[.33]
38.02
[1.50]
24.50
[.96]
24.00
[.94]
6.35 TYP
[.25]
30.55
[1.20]
Ø5.20
[.20]
A2M with Quick Connect
46.51
[1.83]
Ø6.60
[.26]
13.18
[.52]
67.22
[2.65]
45.00
[1.77]
35.20
[1.39]
0.80 TYP
[.03]
6.35 TYP
[.25]
A2S with Quick Connect
Schematics & PC Layouts
Bottom Views
86
30
86
87
87a
30
30
87a
85
85
85
1A
1B
1C
www.citrelay.com
9.50
[.37]
86
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
87
(5X) Ø3.00
[.12]
8.00
[.31]
fax - 763.535.2194
8.40
[.33]
8.40
[.33]
8.40
[.33]
page 3
Specifications and availability subject to change without notice.
Similar pages