All Dimensions are in mm c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or omisions. DESCRIPTION OF LAST CHANGE ISSUE: A BY: AG RN: N/A DATE: 26/03/2011 Date Issue AG 18/04/2011 B PROJECTION ABAC.CDS.0009. UPDATED DESCRIPTION TO JAM NUT MOUNT C B MAX E MAX (NOTE 1) D G EXAMPLE PART NUMBER: F (NOTE 2) DRAWING FOR QUOTATION PURPOSES ONLY. NOT TO BE WORKED TO. Issued By ISSUE: B BY: AG RN: N/A DATE: 18/04/2011 ‘ J 120ƒ ‘ H ABAC 15 W 17 35 S N M09 120ƒ PRODUCT SERIES ‘ K SHELL STYLE FINISH (TABLE 2) A M AX SHELL SIZE (TABLE 1) E MIN (NOTE 1) PANEL INSERT ARRANGEMENT M3 X 0.5 - 6H 3 PLACES CONTACT TYPE P = PIN CONTACTS S = SOCKET CONTACTS PCB ORIENTATION TABLE 1A: CONNECTOR DIMENSIONS (SIZE 9 & 11) SHELL SIZE 9 11 ‘ A MAX 30.50 35.20 B MAX 27.40 32.20 C 22.50 - 22.60 22.50 - 22.60 D 12.20 - 12.30 12.20 - 12.30 E MIN 2.41 2.41 E MAX 7.86 7.86 G 7.36 - 7.46 7.36 - 7.46 ‘ H 14.3 18.1 ‘ J 19.70 - 19.80 23.50 - 23.60 ‘ K 8.8 12.6 MOD CODE (TABLE 3) NOTES: 1. DIMENSION COVERS RANGE OF TYPICAL CATALOGUE ITEMS, CONSULT FACTORY FOR CUSTOM REQUIREMENTS. 2. REFER TO TABLE 3 FOR STOCKED CONTACT TAIL DIMENSIONS. 3. CONSULT FACTORY FOR CUSTOM PCB INTERFACE REQUIREMENTS. 4. REFER TO CATALOGUE OR MIL-DTL-38999 FOR PANEL CUT-OUT DETAILS. C B MAX E MAX (NOTE 1) D 45ƒ G F (NOTE 2) ‘ J TABLE 2: FINISH REF QB W Q F ‘ K ‘ H AX 90ƒ FINISH DESCRIPTION ZINC COBALT BLACK PASSIVATE OLIVE DRAB CADMIUM ZINC COBALT GREEN PASSIVATE ELECTROLESS NICKEL A M TABLE 3: PCB CONTACTS E MIN (NOTE 1) CONTACT SIZE MOD CODE REF. M03 22D 22D M09 22D M10 20 M09 16 M09 M3 X 0.5 - 6H 4 PLACES PANEL PCB ‘ F 0.70 0.70 0.50 0.70 1.15 L 8.50 4.00 5.10 5.10 5.10 TABLE 1B: CONNECTOR DIMENSIONS (SIZE 13 TO 25) ‘ A MAX 38.40 41.60 44.80 49.50 52.70 55.90 59.00 B MAX 35.30 38.50 41.70 46.40 49.60 52.80 56.00 C 22.50 - 22.60 22.50 - 22.60 22.50 - 22.60 22.50 - 22.60 22.50 - 22.60 22.50 - 22.60 22.50 - 22.60 D 12.20 - 12.30 12.20 - 12.30 12.20 - 12.30 12.20 - 12.30 12.20 - 12.30 12.20 - 12.30 12.20 - 12.30 E MIN 2.41 2.41 2.41 2.41 2.41 2.41 2.41 E MAX 7.86 7.86 7.86 7.86 7.86 7.86 7.86 G 7.36 - 7.46 7.36 - 7.46 7.36 - 7.46 7.36 - 7.46 7.36 - 7.46 7.36 - 7.46 7.36 - 7.46 ‘ H 20.46 23.52 26.81 29.36 32.67 36.05 39.02 ‘ J 25.86 - 25.96 28.92 - 29.02 32.20 - 32.30 34.76 - 34.86 38.07 - 38.17 41.45 - 41.55 44.42 - 44.52 ‘ K 14.96 18.02 21.3 23.86 27.17 30.55 33.52 F SHELL SIZE 13 15 17 19 21 23 25 L = CRITICAL CHARACTERISTIC ¸ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION) GEOMETRIC TOLERANCE SYMBOLS MATERIAL: N/A CHARACTERISTIC SYM CHARACTERISTIC STRAIGHTNESS ANGULARITY FLATNESS RUN OUT ROUNDNESS POSITION CYLINDRICITY CONCENTRICITY PROFILE OF A LINE SYMMETRY PROFILE OF A SURFACE M.M.C. PARALLELISM SQUARENESS FOR EXPLANATION OF DIMENSIONS. TOLERANCES. NOTES. ETC. SEE BS308 A2 TITLE: SYM AB CONNECTORS LTD. DRAWN ALL DECIMAL PLACES HOLE DIAMETERS ANGULAR 2 0.1 FINISH: JAM NUT MOUNTING RECEPTACLE WITH INTEGRAL PCB STAND OFF AG TOLERANCES UNLESS OTHERWISE STATED M A TT GROUP COMPANY Do not scale this drawing DATE 0.05 CHKD 03/04/2011 PL THIS DRAWING MAY ONLY BE ALTERED IF THE PART REMAINS INTERCHANGEABLE. IF NOT , A NEW DRAWING NUMBER MUST BE TAKEN. PRODUCT DRAWING NUMBER ABAC.CDS.0009. FINISH CODE VARN