CLV0850A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Radios • Satellite Communications • Fixed Wireless Access £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 850 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -112 Harmonic Suppression (2nd) -15 Tuning Voltage 0.5 Tuning Sensitivity (avg.) Power Output Max Units 851 MHz dBc/Hz -12 dBc 3.3 Vdc MHz/V 31 -3 3 dBm 200 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Load Impedance 0 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-14S Min Typ Supply Voltage (Vcc, nom.) 3.3 Supply Current (Icc) 18 Vdc 22 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CLV0850A-LF Rev A1 Tuning Curve, typ. 920 FREQUENCY (MHz) 910 900 890 880 85 °C 25 °C -40 °C 870 860 850 840 830 820 810 800 790 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 2.75 3 3.3 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 5 4 3 2 1 0 0.030 MIN. CUTBACK FROM LIVE PADS -1 -2 -3 -4 -5 806 815 823 831 838 845 852 860 867 874 881 888 895 903 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B