Lumileds DS134 Extreme flux density in a micro footprint package for precise optical control Datasheet

ILLUMINATION
LUXEON Z ES
Extreme flux density in a micro footprint
package for precise optical control
LUXEON Z ES is a high power 1.6mm x 2.0mm LED that enables never
before seen color consistency, luminance, flux density and design
flexibility for lighting solutions. LUXEON Z ES is undomed, a feature that
provides unmatched optical flexibility for precise beam angle control.
Tested and binned at application conditions, 85°C, LUXEON Z ES emitters
are an ideal choice for indoor and outdoor light sources requiring
superior beam angles, higher efficacy and lower costs.
FEATURES AND BENEFITS
PRIMARY APPLICATIONS
Micro footprint enables close packaging
Architectural
Undomed design allows precise optical control
Downlights
3- and 5-step MacAdam ellipse: Freedom from Binning enabling
color consistency
Lamps
LM-80 test report available
Outdoor
Spotlights
RoHS
DS134 LUXEON Z ES Product Datasheet ©2018 Lumileds Holding B.V. All rights reserved.
No. E352519
COMPLIANT
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Soldering Reflow Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON Z ES LEDs are tested and binned with a DC drive current of 700mA at a junction temperature, Tj, of 85°C.
Part Number Nomenclature
Part numbers for LUXEON Z ES follow the convention below:
L X Z A – B C D E – F
Where:
A
–
designates voltage (2=3V)
B C –
designates nominal ANSI CCT or color (22=2200K, 27=2700K, 30=3000K, 35=3500K, 40=4000K,
50=5000K, 57=5700K, 65=6500K, PR=Royal Blue)
D E –
designates minimum CRI (70=70CRI, 7T=70CRI Typical, 80=80CRI, 90=90CRI, 02=Royal Blue)
F
designates white color space definition (3=3 SDCM and 5=5 SDCM, not used for Royal Blue)
–
Therefore, the following part number is used for a LUXEON Z ES White 3V, 3000K 80CRI, which is binned within a 3-step
MacAdam ellipse:
L X Z 2 – 3 0 8 0 – 3
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Z ES is
compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1a. Product performance for LUXEON Z ES White 3V at 700mA and 350mA, Tj=85°C.
TYPICAL
LUMINOUS
EFFICACY (lm/W)
TYPICAL
LUMINOUS
FLUX (lm)
260
133
143
150
LXZ2-4070
220
260
133
143
150
LXZ2-5070
70
220
270
138
149
156
LXZ2-5770
70 [3]
250
270
138
149
156
LXZ2-577T
70
220
270
138
149
156
LXZ2-6570
70 [3]
250
270
138
149
156
LXZ2-657T
80
140
188
96
103
109
LXZ2-2280-x
2700K
80
170
216
110
119
125
LXZ2-2780-x
3000K
80
180
230
117
127
133
LXZ2-3080-x
3500K
80
190
240
122
132
139
LXZ2-3580-x
4000K
80
190
248
127
136
144
LXZ2-4080-x
5000K
80
190
250
128
138
145
LXZ2-5080-x
2700K
90
140
180
92
99
104
LXZ2-2790-x
3000K
90
150
190
97
105
110
LXZ2-3090-x
3500K
90
150
197
101
108
114
LXZ2-3590-x
4000K
90
150
205
105
113
119
LXZ2-4090-x
5700K
90
170
215
110
118
124
LXZ2-5790-x
LUMINOUS FLUX [1] (lm)
NOMINAL
CCT
MINIMUM
CRI [1]
MINIMUM
4000K
70
220
5000K
70
5700K
5700K
6500K
6500K
2200K
TYPICAL
700mA
TYPICAL
LUMINOUS
EFFICACY (lm/W)
PART NUMBER [2]
350mA
Table 1b. Product performance of LUXEON Z ES Royal Blue at 700mA, Tj=85ºC.
COLOR
Royal Blue
RADIOMETRIC POWER [1] (mW)
MINIMUM
TYPICAL
800
850
TYPICAL RADIANT
EFFICIENCY (%)
PART NUMBER
45%
LXZ2-PR02
Notes for Tables 1a and 1b:
1. Lumileds maintains a tolerance of ±6.5% on both luminous flux and radiometric power and ±2 on CRI measurements.
2. In the part number the -x is the designation for the white color space requirement. On 80CRI and 90CRI versions 3 designates 3 SDCM and 5 designates 5 SDCM. For 70 CRI parts or lower,
they will not have an SDCM designation and all parts are binned within a 5-step SDCM.
3. Typical CRI.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
3
Optical Characteristics
Table 2. Optical characteristics for LUXEON Z ES at 700mA.
PART NUMBER
TYPICAL TOTAL INCLUDED ANGLE [1]
TYPICAL VIEWING ANGLE [2]
LXZ2-xxxx
140°
116°
LXZ2-xxxx-x
140°
116°
LXZ2-PR02
140°
120°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON Z ES at 700mA.
FORWARD VOLTAGE [1] (VF)
MINIMUM
TYPICAL
MAXIMUM
TYPICAL TEMPERATURE
COEFFICIENT OF FORWARD
VOLTAGE [2] (mV/°C)
LXZ2-xxxx
2.5
2.8
3.25
-1.6
3
LXZ2-xxxx-x
2.5
2.8
3.25
-1.6
3
PART NUMBER
TYPICAL THERMAL
RESISTANCE—JUNCTION
TO SOLDER PAD (°C/W)
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 110°C.
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON Z ES.
PARAMETER
MAXIMUM PERFORMANCE
DC Forward Current [1, 2]
Peak Pulsed Forward Current
LED Junction Temperature
[1]
1200mA for LXZ2-xxxx
[1, 3]
1350mA for LXZ2-xxxx
(DC & Pulse)
135°C for LXZ2-xxxx
ESD Sensitivity
Class 3B
Operating Case Temperature
-40°C to 135°C
LED Storage Temperature
-40°C to 135°C
Soldering Temperature
JEDEC 020c 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse) [4, 5]
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
3. Pulsed operation with the maximum peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.
4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse
voltage does not exceed 5V and the reverse current is less than 200uA.
5. A maximum 5V reverse voltage for up to 10s is an acceptable beginning of life, one time, test.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
4
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1a. Typical normalized power vs. wavelength for LXZx-xxxx at test current, Tj=85ºC.
Figure 1b. Typical normalized power vs. wavelength for LXZ2-PR02 at 700mA, Tj=85ºC.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
5
Light Output Characteristics
Figure 2a. Typical normalized light output vs. junction temperature for LXZx-xxxx, at test current.
Figure 2b. Typical normalized light output vs. junction temperature for LXZ2-PR02, at test current.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
6
Figure 3a. Typical normalized light output vs. forward current for LXZx-xxxx, Tj=85ºC.
Figure 3b. Normalized radiant power vs. forward current for LXZ2-PR02, Tj=85ºC.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
7
Forward Current Characteristics
Figure 4a. Typical forward current vs. forward voltage for LXZx-xxxx, Tj=85ºC.
Figure 4b. Typical forward current vs. forward voltage for LXZ2-PR02, Tj=85ºC.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
8
Radiation Pattern Characteristics
Figure 5a. Typical radiation pattern for LXZx-xxxx (white only) at test current, Tj=85°C.
Figure 5b. Typical radiation pattern for LXZ2-PR02 at test current, Tj=85°C.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
9
Figure 6a. Typical polar radiation pattern for LXZx-xxxx (white only) at test current, Tj=85°C.
Figure 6b. Typical polar radiation pattern for LXZ2-PR02 at test current, Tj=85°C.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
10
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
LUXEON Z ES White LEDs are labeled using a 4-digit alphanumeric CAT code following the format below.
A B C D
A
–
designates luminous flux/radiometric power bin (example: L=200 to 210 lumens, M=210 to 220 lumens)
B C –
designates white color bins (example: 5A, 5B, 5C, 5D, 3U, 3L for 3000K parts)
D
designates forward voltage bin (example: X =2.65 to 2.85V, Y=2.85 to 3.00V)
–
Therefore, a LUXEON Z ES white LED with a lumen range of 200 to 210, color bin of 5D and a forward voltage range of 2.65 to
2.85V has the following CAT code:
L 5 D X
LUXEON Z ES Royal Blue LEDs are labeled using a 3-digit alphanumeric CAT code following the format below.
A B C
A
–
designates luminous flux/radiometric power bin (example: L=200 to 210 lumens, M=210 to 220 lumens)
B
–
designates Royal Blue peak wavelength bins (example: 3 for peak wavelength of 440nm to 445nm)
C
–
designates forward voltage bin (example: P=2.5 to 2.75V, R=2.75 to 3.00V)
Therefore, a LUXEON Z ES Royal Blue with a radiometric power of 1000mW to 1050mW, peak wavelength bin of 3 and a forward
voltage range of 2.5 to 2.75V has the following CAT code:
Q 3 P
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
11
Luminous Flux Bins
Table 5 lists the standard photometric luminous flux bins for LUXEON Z ES emitters. Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Luminous flux bin definitions for LUXEON Z ES, Tj=85°C.
BIN
LUMINOUS FLUX [1] (lm)
MINIMUM
MAXIMUM
D
130
140
E
140
150
F
150
160
G
160
170
H
170
180
J
180
190
K
190
200
L
200
210
M
210
220
N
220
230
P
230
240
Q
240
250
R
250
260
S
260
270
T
270
280
U
280
290
Notes for Table 5:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
Radiometric Power Bins
Table 6. Radiometric power bin definitions for LXZ2-PR02.
BIN CODE
RADIOMETRIC POWER [1] (mW)
MINIMUM
MAXIMUM
L
800
850
M
850
900
N
900
950
P
950
1000
Q
1000
1050
R
1050
1100
S
1100
1150
Notes for Table 6:
1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
12
Color Bin Definitions
The four lines segmenting the area between
3-Step and 5-step MAE have slope of ±1 when
drawn in CIE 1976 color space, with these
imaginary lines eminating from the MAE center
Figure 7. Color space definition for LUXEON Z ES.
Figure 8. 3- and 5-step MacAdam ellipse illustration for Table 7.
Table 7. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON Z ES.
NOMINAL CCT
COLOR SPACE [1]
CENTER POINT [2]
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
2200K
Single 3-step MacAdam ellipse
(0.5020, 0.4156)
0.00863
0.00398
49.27°
2700K
Single 3-step MacAdam ellipse
(0.4578, 0.4101)
0.00810
0.00420
53.70°
3000K
Single 3-step MacAdam ellipse
(0.4338, 0.4030)
0.00834
0.00408
53.20°
3500K
Single 3-step MacAdam ellipse
(0.4073, 0.3917)
0.00927
0.00414
54.0°
4000K
Single 3-step MacAdam ellipse
(0.3818, 0.3797)
0.00939
0.00402
53.70°
5000K
Single 3-step MacAdam ellipse
(0.3447, 0.3553)
0.00822
0.00354
59.60°
2200K
Single 5-step MacAdam ellipse
(0.5020, 0.4156)
0.01438
0.00663
49.27°
2700K
Single 5-step MacAdam ellipse
(0.4578, 0.4101)
0.01350
0.00700
53.70°
3000K
Single 5-step MacAdam ellipse
(0.4338, 0.4030)
0.01390
0.00680
53.20°
3500K
Single 5-step MacAdam ellipse
(0.4073, 0.3917)
0.01545
0.00690
54.00°
4000K
Single 5-step MacAdam ellipse
(0.3818, 0.3797)
0.01565
0.00670
53.70°
5000K
Single 5-step MacAdam ellipse
(0.3447, 0.3553)
0.01370
0.00590
59.60°
5700K
Single 5-step MacAdam ellipse
(0.3287, 0.3417)
0.01243
0.00533
59.09°
6500K
Single 5-step MacAdam ellipse
(0.3123, 0.3282)
0.01115
0.00475
58.57°
Notes for Table 7:
1. 3-step is available in 80CRI and 90CRI, and 5-step is available in 70CRI, 80CRI and 90CRI.
2. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates in the CIE color space.
Table 8. MacAdam ellipse color bin definitions for LXZ2-xxxx, Tj=85°C.
BIN
SDCM
30
3-step MacAdam ellipse (70CRI, 80CRI, 90CRI)
3U
3-step MacAdam ellipse (80, 90CRI)
3L
3-step MacAdam ellipse (80, 90CRI)
5A
5-step MacAdam ellipse (70, 80, 90CRI)
5B
5-step MacAdam ellipse (70, 80, 90CRI)
5C
5-step MacAdam ellipse (70, 80, 90CRI)
5D
5-step MacAdam ellipse (70, 80, 90CRI)
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
13
Forward Voltage Bins
Table 9. Forward voltage bin definitions for LXZ2-xxxx.
BIN
FORWARD VOLTAGE [1] (VF)
MINIMUM
MAXIMUM
P
2.50
2.75
R
2.75
3.00
S
3.00
3.25
X
2.65
2.85
Y
2.85
3.00
Notes for Table 9:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
Peak Wavelength Bins
Table 10. Peak wavelength bins for LXZ2-PR02, 700mA, Tj=85°C.
BIN
PEAK WAVELENGTH [1] (nm)
MINIMUM
MAXIMUM
3
440
445
4
445
450
5
450
455
Notes for Table 10:
1. Lumileds maintains a tolerance of ±2nm on peak wavelength measurements.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
14
Mechanical Dimensions
Figure 9. Mechanical dimensions for LUXEON Z ES.
Notes for Figure 9:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
15
Soldering Reflow Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
TL
Temperature
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 11.
Table 11. Reflow profile characteristics for LUXEON Z ES.
PROFILE FEATURE
LEAD FREE ASSEMBLY
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 120 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 12. Moisture sensitivity levels for LUXEON Z ES.
LEVEL
1
FLOOR LIFE
SOAK REQUIREMENTS STANDARD
TIME
CONDITIONS
TIME
CONDITIONS
Unlimited
≤30°C / 85% RH
168 Hours +5 / -0
85°C / 85% RH
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
16
Solder Pad Design
Figure 11. Solder pad layout for LUXEON Z ES.
Notes for Figure 11:
1. All dimensions are in millimeters.
2. The figure shows one of the LUXEON Z ES layouts for close-packing design on Printed Circuit Board (PCB). For more information on assembly and additional layouts, please refer to
LUXEON Z ES Application Brief (AB120).
3. The *.dwg files are available at lumileds.com.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
17
Packaging Information
Pocket Tape Dimensions
Figure 12. Tape dimensions for LUXEON Z ES.
Notes for Figure 12:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Reel Dimensions
Figure 13. Reel dimensions for LUXEON Z ES.
Notes for Figure 13:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved.
18
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world safer, better and more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
©2018 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS134 LUXEON Z ES
Product Datasheet 20180314
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants
or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its
affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/
patent coverage may be accessed at lumileds.com/patents.