ES3AB thru ES3MB Super Fast Surface Mount Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 3.0 Amperes Features Glass passivated chip Super fast switching for high efficiency For surface mounted applications Low forward voltage drop and high current capability Low reverse leakage current Plastic material has UL flammability classification 94V-0 Mechanical Data Case : Molded plastic Polarity : Color band denote cathode Weight : 0.003 ounce, 0.093 gram Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbols ES 3AB ES 3B B ES 3C B ES 3D B ES 3F B ES 3GB ES 3JB ES 3K B ES 3MB Units Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 105 140 210 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 150 200 300 400 600 800 1000 Volts Parameter Maximum average forward rectified current I(AV) 3.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 100.0 Amps Maximum forward voltage @ 3.0A DC VF Maximum DC reverse current at rated DC blocking voltage @TL=100oC @ TJ=25oC @ TJ=125oC Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Typical thermal resistance (Note 3) (Note 4) Operating junction temperature range Storage temperature range Notes: 0.92 1.25 1.7 Volts IR 10.0 500 uA uA trr 25 nS CJ 45 RθJL RθJA 10 50 TJ -55 to +150 o C TSTG -55 to +150 o C 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Thermal Resistance junction to Lead. 4. Thermal Resistance junction to Ambient. 247 pF o C/W RATINGS AND CHARACTERISTIC CURVES 248