OPTOELECTRONICS LED Displays Unit: mm Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 7.01 10° 14 A E C GaAsP/GaP–Red; GaP–Green 7 Segment, 0.43 Inch 2.54 DPD DP 8 7 1.5 Dia. (2) AND-4310 Series 0.5 dia 15.24 G B 19.05 F 10.92 1 Features 12.70 3.5 7.72 Min. • 0.43 inch character height • Available in red or green • Suitable for numerical readout for instrument and industrial products • Industry pin-for-pin compatibility • Available in both common cathode and common anode • RoHS Compliant 7.62 Description Common Number of Digits Size Cathode Color Anode Display Face Number of Pins 0.43 inch 1 AND-4310SCL AND-4310SAL Red Red 14 0.43 inch 1 AND-4310GCL AND-4310GAL Green Gray 14 Absolute Maximum Ratings (T = 25°C) Characteristics Symbol Rating Unit IF(DC)/SEG 30 mA IFP/SEG 100 mA VR 3 (Red), 5 (Green) V Operating Temperature Range TOpr -25 to 85 °C Storage Temperature Range TStg -25 to 100 °C DC Forward Current/Segment Pulse Forward Current/Segment Reverse Voltage/Segment Electro-Optical Characteristics (T = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 10 mA – 2.1 3.0 V Reverse Current IR VR = 3 (Red), 5 (Green) – – 100 µA Red IV IF = 10 mA 1.3 3.3 – mcd Green IV IF = 10 mA 1.1 2.9 – mcd Red λP IF = 10 mA – 635 – nm Green λP IF = 10 mA – 567 – nm Red ∆λ IF = 10 mA – 40 – nm Green ∆λ IF = 10 mA – 30 – nm Luminous Intensity Per Segment Peak Emission Wavelength Spectral Line Half Width Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07 AND-4310 Series GaAsP/GaP–Red; GaP–Green LED Displays IV vs. TC IF/Seg vs. VF Forward Current IF/Seg (mA) Relative Luminous Intensity IV 3 2 1 0.5 0.4 0.3 -20 0 20 40 60 80 Case Temperature TC (°C) 50 40 30 TA = 25°C 20 10 5 4 3 2 1 1.6 100 1.8 IFMAX/Seg vs. TA 2.0 2.2 Forward Voltage (V) 2.4 2.6 IV/Seg vs. IF/Seg Luminous Intensity IV/Seg (mcd) Maximum Forward Current IFMAX/Seg (mA) 36 30 Direct Current 24 18 12 6 0 0 20 40 60 80 100 TA = 25°C 10 5.0 3.0 Green Red 1.0 0.5 Ambient Temperature TA (°C) 1 2 3 4 5 7 10 Forward Current IF/Seg (mA) 20 30 AND-4310 Series Pin Connection Table AND-4310 SAL/GAL Pin Connection Pin AND-4310 SCL/GCL Connection Pin Connection Pin Connection 1 Cathode A 8 Cathode D 1 Anode A 8 Anode D 2 Cathode F 9 Cathode RHDP 2 Anode F 9 Anode RHDP 3 Common Anode 10 Cathode C 3 Common Cathode 10 Anode C 4 No Pin 11 Cathode G 4 No Pin 11 Anode G 5 No Pin 12 No Pin 5 No Pin 12 No Pin 6 Cathode LHDP 13 Cathode B 6 Anode LHDP 13 Anode B 7 Cathode E 14 Common Anode 7 Anode E 14 Common Cathode Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07