CLV1052M-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Data Transmitter • Digital Radios • Satellite Communications £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1048 Typ Max Units 1058 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -109 dBc/Hz Harmonic Suppression (2nd) -35 dBc Tuning Voltage 0.5 4.5 MHz/V 19 Tuning Sensitivity (avg.) 6 dBm 100 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) 4 MHz 85 °C Max Units Power Output 0 Load Impedance 3 Vdc 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-14MS-LOW Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 21 Vdc 25 mA Additional Notes MODULATION SENSITIVITY: 27 kHz/V LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CLV1052M-LF Rev A1 Tuning Curve, typ. 1120 FREQUENCY (MHz) 1100 1080 85 °C 25 °C 1060 1040 -40 °C 1020 1000 980 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 8 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 7 6 5 4 3 2 0.030 MIN. CUTBACK FROM LIVE PADS 1 0 -1 -2 -3 1002 1022 1036 1048 1060 1070 1081 1091 1100 1110 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 P4 REST Vt RF Out Vcc MOD GROUND PACKAGE H MINI-14MS 0.220 MINI-14MS-LOW 0.160 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B