600 Series IdentiFlex 610 with SmartScan™ Analog Addressable Control Panel Description The IdentiFlex 610 (IF610SS) with SmartScan™ is suited for medium-sized installations of commercial, institutional, and industrial life-safety applications. The IF610SS can monitor and control up to 792 intelligent analog addressable input/output points. Analog circuits are backed up by Gamewell-FCI’s Default Alarm Mode for added security. The 1,000-point history log furnishes a complete record of system activities. The interactive operator’s display uses LED prompting for ease of programming and user operation. The alphanumeric display and keypad simplify field programming, or program from a PC using Gamewell-FCI’s SmartProgram II programmer. The IF610SS’s cabinet will fit between 16" studs for semiflush mounting. The compact design and key-activated dead-front construction enables secure routine maintenance of the system. Access to system function keys is limited by a key switch. Multiple levels of password protection prevent unauthorized use. The circuit boards are mounted on a removable chassis, and are designed with pluggable terminal strips for ease of installation and service. Operator’s Display The IF610SS’s operator’s display provides all user access to the system. The display has all the necessary keys and annunciation points to maintain and monitor the system. Alarm, supervisory, and trouble conditions are indicated on the operator’s display by dedicated LEDs and an internal sounder. The Acknowledge, Reset, and Signal Silence keys are located directly below the 4-line by 40-character backlit alphanumeric display. All system functions and operational logic can be programmed directly from the front panel. g2001ph1.jpg The IF610SS offers all the features of today’s most advanced life safety systems. The integration of analog and addressable hardwired circuits allows system engineers to customize panels and maximize efficiency for a given application. The IF610SS can be networked with up to 256 other 600 Series panels using Gamewell-FCI’s SmartLink™ peer-to-peer network. IF610SS Features • Two or four Signaling Line Circuits (SLC), up to 792 points. • SmartScan™ protocol — up to 99 detectors and 99 devices per loop. • SmartStart™ self-programming logic. • Programmable by PC or front panel. • Password protected. • Approved for Supervisory Service. • Fully digital SLC protocol. • SmartLink™ networkable. • 1000-event history log. • Automatic drift compensation. • Coded signaling capability. • Adjustable sensor sensitivity and temperature settings. • Day/night sensitivity setting. • Supervisory service. • Style 6 (Class A) or Style 4 (Class B) SLC. • Two Style Y (Class B), or two Style Z (Class A) notification appliance circuits (NACs). • Semi-flush mounting (between 16" studs). • 160-character display. • Optional integrated voice evacuation. • Optional UDACT. • Agent Releasing service. An ISO 9000-2000 Company SIGNALING SmartScan™ Series and SmartStart™ are trademarks of Honeywell International Inc. Microsoft® Windows® is a registered trademark of Microsoft® Corporation. FM APPROVED S521 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. ©2007 Honeywell International Inc. All rights reserved. www.gamewell-fci.com CS-2491 Rev. A page 1 of 3 Analog Addressable Signaling Line Circuits The IF610SS analog interface module provides two or four Signaling Line Circuits (SLC), loop circuits that can monitor and control up to 198 analog/addressable devices on each loop, for a total of 792 analog points in a four-loop system. An alphanumeric display can also be used for remote status and control. The alphanumeric display will communicate over the serial communications network. The IF610SS can communicate locally or remotely with a printer to document system activity. Each SLC loop has a dedicated microprocessor that simultaneously communicates with connected field devices and the main CPU. See the RAN/SAN data sheets (CS-2025 and CS-2027) for complete annunciator details. The IF610SS uses the SmartScan™ fully digital communications protocol for superior speed and accuracy of event reporting. This protocol provides alarm verification per detector, detector adjustability and compensation, adjustable analog heat detector range, circuit isolation, and priority interrupts. Priority interrupts allow contact-type devices such as manual fire alarm stations to interrupt the polling cycle and transmit their addresses at any time. Applications The IF610SS Analog Addressable Control Panel is ideal for new or retrofit small- to mid-sized projects that require state-of-the-art life-safety systems. The embedded CPU offers users unrivaled reliability. With compatible analog sensors and addressable input and control interface devices, and its remote status and control capabilities, the IF610SS provides system engineers with all the tools necessary to design effective system solutions. With this fully digital protocol, the IF610SS will operate on most types of field wiring, greatly expanding its use in retrofit applications. Consult the supplemental SLC manual or Gamewell-FCI Technical Support for specific wiring requirements. IF610SS Power Supply The IF610SS power supply is a fully regulated 6 Amp supply that furnishes system operating and signaling power. It is equipped with a battery charger which maintains the secondary power source. The power supply is monitored by the main CPU, ensuring that adequate power is available. The power supply design allows for high efficiency while providing precise power output. The battery charger maintains batteries up to 26 AH. The supply powers two onboard Notification Appliance Circuits (NACs) Class A or B. Input (I) / Output (O) Devices Addressable control output devices are the interface between analog circuits and building functions. The outputs are controlled by Control By Event (CBE) software within the IF610SS, and can be programmed to respond to any event. The control devices can also be used as supervised remote signaling circuits. The IF610SS’s RS-232 output expands system monitoring and control capabilities. Remote Display and Control System designers and engineers can add serial annunciators to display system activity and control. Serial annunciator drivers are available in 16-point increments and are an ideal interface to graphic annunciators. Switches can be used for Acknowledge, Reset, Signal Silence, Drill, etc., to customize the remote status control network. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com CS-2491 Rev. A page 2 of 3 Specifications Ordering Information (Continued) Common Control: Part Number Description IF610SS-396XL 396 point/two SLC IF610SS in extra-large housing, allowing space for battery storage (Refer to IF610SS-396R model listed above). Cabinet: 30.0" H x 22.0" W x 5.5" D (76.2 H x 55.88 W x 13.97 D cm) SSM610-2 Replacement two (2) analog circuit cards for a total of 396 analog/addressable points. IF610SS-792 IF610SS analog/addressable system with SmartScan™ consisting of the following: • IF610SS common control with the following: - Main CPU - IF610 front display with LCD alpha numeric display Standby Current: Alarm Current: Input Power: 0.125A 0.171A plus signaling circuit power, plus 0.002A for master box, or plus 0.022A for reverse-polarity 120 VAC, 2.0A Auxiliary Output: S+/S–, A+/A– Common Relays: 2.0A combined 1.0A @ 30 VDC, or 0.5A @ 250 VAC Signaling Circuits: 24 VDC @ 2.0A per circuit Analog SLC: IF610SS/396 points 0.055A 0.055A Standby Current: Alarm Current: IF610SS/792 points 0.075A 0.075A - Bus driver module - Common system relays - Ribbon cables Panel Dimensions: Standard Cabinet: XL Cabinet: 20.0" H x 14.0" W x 4.5" D (50.8 H x 35.6 W x 11.4 D cm) 30.0" H x 22.0" W x 5.5" D (76.2 H x 55.9 W x 13.97 D cm) Battery Storage Dimensions: Standard Cabinet: 6.0" H x 9.0" W x 4.5" D (15.24 H x 22.86 W x 11.43 D cm) XL Cabinet: 14" H x 22.0" W x 5.5" D (35.56 H x 55.88 W x 13.97 D cm) Relative Humidity: 93% non-condensing Temperature Rating: 32°F – 120°F (0°C – 49°C) Ordering Information Part Number IF610SS-396 Description IF610SS analog/addressable system consisting of the following: • IF610SS common control (main CPU, IF610 front display with the following: - LCD alphanumeric display - Bus driver module - Common system relays - Ribbon cables • 6 Amp main power supply • Two (2) SmartScan analog circuit modules (396 analog/addressable points) • Standard cabinet assembly Standard Cabinet: 20.0” H x 14.0” W x 4.5” D (50.8 H x 35.6 W x 11.4 D cm) • 6 Amp main power supply • Four (4) analog circuits module (792 analog/addressable points) • Standard cabinet assembly 20.0” H x 14.0” W x 4.5” D (50.8 H x 35.6 W x 11.4 D cm) IF610SS-792XL 792 point/two (2) SLC IF610SS in extralarge housing, allowing space for battery storage. (Refer to IF610SS-792R model listed above). Cabinet: 30.0" H x 22.0" W x 5.5" D (76.2 H x 55.88 W x 13.97 D cm) SSM610-4 Upgrades the SS-396 to an IF610SS-792 System. Replaces the two-circuit analog card with a four-circuit card to provide a total of 792 analog/addressable points. 71810 IdentiFlex 610 Installation and Operation Manual CAB610 Standard cabinet and door only (no chassis) for advance installation. Cabinet: 20.0” H x 14.0” W x 4.5” D (50.8 H x 35.6 W x 11.43 D cm) CAB610-XL Extra-large cabinet and door only (no chassis) for advance installation. Cabinet: 30.0” H x 22.0” W x 5.5” D (76.2 H x 55.9 W x 14 D cm) GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com CS-2491 Rev. A page 3 of 3