Rev. 1.0 SIPMOS Power-Transistor BSP324 Feature Product Summary • N-Channel VDS • Enhancement mode RDS(on) • Logic Level ID • dv/dt rated 400 V 25 Ω 0.17 A SOT-223 Type Package Ordering Code Tape and Reel Information Marking BSP324 SOT-223 Q67000-S215 E6327: 1000 pcs/reel BSP324 Maximum Ratings, at Tj = 25 °C, unless otherwise specified Parameter Symbol Continuous drain current Value A ID TA=25°C 0.17 TA=70°C 0.14 Pulsed drain current Unit ID puls 0.68 dv/dt 6 VGS ±20 TA=25°C Reverse diode dv/dt kV/µs IS=0.17A, VDS=320V, di/dt=200A/µs, Tjmax=175°C Gate source voltage ESD Sensitivity (HBM) as per MIL-STD 883 Power dissipation V Class 1 Ptot 1.8 W -55... +150 °C TA=25°C Operating and storage temperature T j , Tstg IEC climatic category; DIN IEC 68-1 55/150/56 Page 1 2003-02-21 Rev. 1.0 BSP324 Thermal Characteristics Parameter Symbol Values Unit min. typ. max. - 16 25 - 85 115 - 45 70 Characteristics Thermal resistance, junction - soldering point RthJS K/W (Pin 4) SMD version, device on PCB: RthJA @ min. footprint @ 6 cm2 cooling area 1) Electrical Characteristics, at Tj = 25 °C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. V(BR)DSS 400 - - VGS(th) 1.3 1.9 2.3 Static Characteristics Drain-source breakdown voltage V V GS=0, I D=250µA Gate threshold voltage, VGS = V DS ID=94µA Zero gate voltage drain current µA IDSS V DS=400V, V GS=0, T j=25°C - 0.01 0.1 V DS=400V, V GS=0, T j=125°C - - 10 IGSS - 10 100 nA RDS(on) - 14.3 22 Ω RDS(on) - 13.6 25 Gate-source leakage current V GS=20V, VDS=0 Drain-source on-state resistance V GS=4.5V, I D=0.05A Drain-source on-state resistance V GS=10V, I D=0.17A 1Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm² (single layer, 70 µm thick) copper area for drain connection. PCB is vertical without blown air. Page 2 2003-02-21 Rev. 1.0 BSP324 Electrical Characteristics, at Tj = 25 °C, unless otherwise specified Parameter Symbol Conditions Values Unit min. typ. max. 0.09 0.19 - S pF Dynamic Characteristics Transconductance g fs V DS≥2*I D*RDS(on)max, ID=0.14A Input capacitance Ciss V GS=0, V DS=25V, - 103 154 Output capacitance Coss f=1MHz - 9.2 13.6 Reverse transfer capacitance Crss - 3.8 5.7 Turn-on delay time td(on) V DD=225V, V GS=10V, - 4.6 6.9 Rise time tr ID=0.17A, RG=6Ω - 4.4 6.6 Turn-off delay time td(off) - 17 25 Fall time tf - 68 102 - 0.35 0.45 - 2.17 2.82 - 4.54 5.9 V(plateau) VDD =320V, ID =0.17A - 3.6 - V IS - - 0.17 A - - 0.68 ns Gate Charge Characteristics Gate to source charge Qgs Gate to drain charge Qgd Gate charge total Qg VDD =320V, ID =0.17A VDD =320V, ID =0.17A, nC VGS =0 to 10V Gate plateau voltage Reverse Diode Inverse diode continuous TA=25°C forward current Inv. diode direct current, pulsed ISM Inverse diode forward voltage VSD V GS=0, I F=0.17A - 0.8 1.2 V Reverse recovery time trr V R=200V, IF=l S, - 85 127 ns Reverse recovery charge Qrr di F/dt=100A/µs - 104 156 nC Page 3 2003-02-21 Rev. 1.0 BSP324 1 Power dissipation 2 Drain current Ptot = f (TA) ID = f (T A) parameter: VGS≥ 10 V BSP324 1.9 BSP324 0.18 W A 1.6 0.14 0.12 1.2 ID P tot 1.4 0.1 1 0.08 0.8 0.6 0.06 0.4 0.04 0.2 0.02 0 0 20 40 60 80 100 120 0 °C 160 0 20 40 60 80 100 120 °C TA 3 Safe operating area 4 Transient thermal impedance ID = f ( VDS ) ZthJA = f (tp) parameter : D = 0 , TA = 25 °C parameter : D = t p/T 10 1 BSP324 10 A K/W 0 t = 170.0µs p ID / ID = 10 2 BSP324 -1 V 10 1 10 0 Z thJA 10 160 TA DS 1 ms n) S(o RD D = 0.50 10 ms 0.20 0.10 10 -2 10 0.05 single pulse -1 0.02 0.01 DC 10 -3 10 0 10 1 10 2 V 10 3 VDS 10 -2 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 s 10 tp Page 4 2003-02-21 4 Rev. 1.0 BSP324 5 Typ. output characteristic 6 Typ. drain-source on resistance ID = f (VDS) RDS(on) = f (ID) parameter: Tj = 25 °C, V GS parameter: Tj = 25 °C, V GS 0.6 22 Ω R DS(on) 18 0.4 16 14 12 0.3 10V 7V 6V 5V 4.5V 4.3V 4.1V 3.9V 3.7V 0.2 0.1 3.7V 10 3.9V 4.1V 8 4.3V 4.5V 6 5V 6V 4 7V 10V 2 0 0 0 1 2 3 4 5 6 7 8 10 0 0.05 0.1 0.15 0.2 0.25 7 Typ. transfer characteristics 8 Typ. forward transconductance ID= f ( VGS ); V DS≥ 2 x ID x RDS(on)max g fs = f(I D) parameter: Tj = 25 °C parameter: Tj = 25 °C 0.35 A ID 0.35 A ID 0.35 0.36 S A 0.28 ID gfs 0.25 0.24 0.2 0.2 0.15 0.16 0.12 0.1 0.08 0.05 0.04 0 0 1 2 3 0 V 5 0 VGS Page 5 0.05 0.1 0.15 0.2 0.25 2003-02-21 Rev. 1.0 BSP324 9 Drain-source on-state resistance 10 Typ. gate threshold voltage RDS(on) = f (Tj) VGS(th) = f (T j) parameter : ID = 0.17 A, VGS = 10 V parameter: VGS = VDS; ID =94µA BSP324 130 2.6 Ω V 98% 110 2.2 - VGS(th) R DS(on) 100 90 80 2 typ. 1.8 70 1.6 60 1.4 50 2% 40 1.2 98% 30 1 20 typ 10 0 -60 -20 20 60 0.8 100 °C 0.6 -60 180 -20 20 60 100 Tj °C 160 Tj 11 Typ. capacitances 12 Forward character. of reverse diode C = f (V DS) IF = f (V SD) parameter: VGS=0, f=1 MHz, Tj = 25 °C parameter: Tj 10 3 10 0 BSP324 A pF Ciss 2 10 -1 10 -2 C IF 10 Coss 10 1 T j = 25 °C typ Crss T j = 150 °C typ T j = 25 °C (98%) T j = 150 °C (98%) 10 0 0 10 5 10 15 20 V 30 V DS -3 0 0.4 0.8 1.2 1.6 2 2.4 V 3 VSD Page 6 2003-02-21 Rev. 1.0 BSP324 13 Typ. gate charge 14 Drain-source breakdown voltage VGS = f (QG); parameter: VDS , V(BR)DSS = f (Tj) ID = 0.17 A pulsed, Tj = 25 °C BSP324 16 490 BSP324 V V V (BR)DSS 470 V GS 12 10 0.2 VDS max 460 450 440 430 8 0.5 VDS max 420 0.8 VDS max 410 6 400 4 390 380 2 370 0 0 1 2 3 4 5 nC 360 -60 7 QG -20 20 60 100 °C 180 Tj Page 7 2003-02-21 Rev. 1.0 BSP324 Published by Infineon Technologies AG, Bereichs Kommunikation St.-Martin-Strasse 53, D-81541 München © Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Page 8 2003-02-21