Chokes for Data and Signal Lines B82796-C2 Quad Chokes Rated voltage 42 Vac/80 Vdc Rated current 100 to 200 mA Rated inductance 0,011 to 2,2 mH Construction ■ Current-compensated ring core quad choke with ferrite core ■ Plastic case Features ■ Case flame-retardant as per UL 94 V-0 ■ Suitable for automatic insertion Applications ■ Suppression of asymmetrical interference coupled in on lines, whereas data signals up to some MHz can pass unaffectedly Terminals ■ Pins fitting standard PCB grid Marking Ordering code, manufacturer, date of manufacture (month, year) Dimensional drawing 5±0,2 3 x 2,5±0,2 6,7±0,1 3±0,2 4,6 _ 0,1 9,2±0,1 0,5 x 0,5 SSB1486-C 296 04/00 Chokes for Data and Signal Lines B82796-C2 Quad Chokes General technical data Rated voltage VR 42 Vac (50/60 Hz) 80 Vdc Rated current IR Referred to 50 Hz and 60 °C ambient temperature Rated inductance LR Measured with HP 4275A; Measured frequency for L ≤ 1 mH = 100 kHz, 0,1 mA L > 1 mH = 10 kHz, 0,1 mA (specified per winding) Inductance tolerance – 30 %/+ 50 % Inductance decrease ∆L/L0 < 10 % at dc magnetic bias with IR Stray inductance LS Measured at 100 kHz and 5 mA DC resistance Rtyp Typical values, measured at 20 °C ambient temperature Climatic category 40/125/56 (– 40 °C/+ 125 °C/56 days damp heat test) in accordance with IEC 60068-1 Weight Approx. 0,4 g Characteristics and ordering codes LR mH LS, typ nH IR mA Rtyp Ω VT Vdc, 2 s Ordering code 0,011 0,047 0,47 2,2 50 100 200 250 200 150 100 100 0,12 0,15 0,35 0,40 750 750 750 750 B82796-C2113-N201 B82796-C2473-N201 B82796-C2474-N215 B82796-C2225-N265 297 04/00