SM08G43 TOSHIBA BI−DIRECTIONAL TRIODE THYRISTOR SILICON PLANAR TYPE SM08G43 AC POWER CONTROL APPLICATIONS Unit: mm l Repetitive Peak Off−State Voltage : VDRM = 400V l R.M.S On−State Current : IT (RMS) = 0.8A MAXIMUM RATINGS CHARACTERISTIC SYMBOL RATING UNIT VDRM 400 V R.M.S On−State Current (Full Sine Waveform Tc = 65°C) IT (RMS) 0.8 A Peak One Cycle Surge On−State Current (Non−Repetitive) ITSM Repetitive Peak Off−State Voltage 2 I t Limit Value 2 6 (50Hz) 6.6 (60Hz) A 2 I t 0.18 A s PGM 0.5 W PG (AV) 0.05 W Peak Gate Voltage VGM 5 V Peak Gate Current IGM 0.3 A Tj −40~125 °C Tstg −40~125 °C Peak Gate Power Dissipation Average Gate Power Dissipation Junction Temperature Storage Temperature Range 1 JEDEC JEITA TOSHIBA Weight: 0.2g TO−92 SC−43 13−5A1E 2001-07-10 SM08G43 ELECTRICAL CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL Repetitive Peak Off−State Current Gate Trigger Voltage Gate Trigger Current IDRM I (1+) II (1−) III (3−) IV (3+) I (1+) II (1−) III (3−) IV (3+) TEST CONDITION MIN TYP. MAX UNIT ― ― 10 µA T2 (+) , Gate (+) ― ― ― T2 (+) , Gate (−) ― ― 1.5 T2 (−) , Gate (−) ― ― 1.5 T2 (−) , Gate (+) ― ― ― T2 (+) , Gate (+) ― ― ― T2 (+) , Gate (−) ― ― 3 T2 (−) , Gate (−) ― ― 3 T2 (−) , Gate (+) ― ― ― VDRM = Rated VGT VD = 12V, RL = 20Ω IGT V mA Peak On−State Voltage VTM ITM = 1.2A ― ― 1.5 V Gate Non−Trigger Voltage VGD VD = Rated, Tc = 125°C 0.2 ― ― V VD = 12V, Gate Open ― ― 10 mA Holding Current IH Thermal Resistance Rth (j−c) Junction to Case ― ― 50 °C / W Thermal Resistance Rth (j−a) Junction to Ambient ― ― 220 °C / W MARKING NUMBER *1 SYMBOL TYPE MARK SM08G43 M08G Example 8A: January 1998 8B: February 1998 8L: December 1998 *2 2 2001-07-10 SM08G43 3 2001-07-10 SM08G43 4 2001-07-10 SM08G43 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 5 2001-07-10