ASL33C ASL33C Data Sheet Low Current, Low Noise Amplifier MMIC over DC~3000 MHz 1. Product Overview 1.1 General Description ASL33C is a one-stage LNA for DVB, CMMB, CATV, FTTH receiver and antenna. It has a low noise, high gain, and high linearity over a wide range of frequency up to 3 GHz. it is also suitable for use in the low noise amplifier block of mobile wireless systems. The amplifier is available in a SOT363 package and passes the stringent DC, RF, and reliability test. 1.2 Features 19.9 dB Gain at 470 MHz 11.0 dBm P1dB at 470 MHz 24.0 dBm Output IP3 at 470 MHz 1.1 dB NF at 470 MHz MTTF > 100 Years Minimum External Matching Components Single Supply 1.3 Applications DVB, CMMB antenna Telecommunication System Wide Band CATV, FTTH 1.4 Package Profile & RoHS Compliance SOT363, 2.1x2.0 mm2, surface mount 1/15 ASB Inc. [email protected] RoHS-compliant April 2017 ASL33C 2. Summary on Product Performances 2.1 Typical Performance Supply voltage = +5 V, TA = +25 C, ZO = 50 Parameter Typical Unit Frequency 30 470 860 1950 MHz Gain 21.0 19.7 17.7 13.3 dB S11 -8 -10 -12 -18 dB S22 -14 -13 -11 -10 dB Noise Figure 1.2 1.1 1.0 1.0 dB IP31) 22 24 22 30 dBm Output P1dB 10 11 9 16 dBm Current 20 35 mA Device Voltage +3.7 4.15 V Output 1) OIP3 is measured with two tones at the output power of -5 dBm/tone separated by 1 MHz. 2.2 Product Specification Supply voltage = +5 V, TA = +25 C, ZO = 50 Parameter Min Typ Max Unit Frequency 470 MHz Gain 19.7 dB S11 -10 dB S22 -13 dB Noise Figure 1.1 Output IP3 24 Output P1dB 11 Current 20 Device Voltage +3.7 2.3 dB SUBCKT dBm ID=S1 dBm mA NET="ASL13C_5V_4 V Pin Configuration Pin Description Simplified Outline 1 RF_IN 1 6 2, 3, 5, 6 Ground 2 5 4 RF_OUT & Bias 3 4 2 1 2/15 ASB Inc. [email protected] April 2017 ASL33C 2.4 Absolute Maximum Ratings Parameters Max. Ratings Operation Case Temperature -40 to 85 C Storage Temperature -40 to 150 C Device Voltage +5.5 V Operation Junction Temperature +150 C Input RF Power (CW, 50 matched as 2000 MHz application circuit) +20 dBm 2.5 Thermal Resistance Symbol Description Typ Unit Rth Thermal resistance from junction to lead 210 C/W 2.6 ESD Classification & Moisture Sensitivity Level ESD Classification HBM Class 1A MM Class A CAUTION: Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Moisture Sensitivity Level MSL 3 at 260 C reflow (Intentionally Blanked) 3/15 ASB Inc. [email protected] April 2017 ASL33C 3. Application: 30 ~ 860 MHz (DVB, CMMB, Vsupply = +5 V) 3.1 Application Circuit & Evaluation Board Vsupply = +5 V R2 C5 C4 L1 C1 RF IN C2 RF OUT ASL33C R1 C3 PCB Information Material FR4 Thickness (mm) 0.8 Size (mm) 40x40 EB No. EB-363-A7 Bill of Material 4/15 Symbol Value Size Description Manufacturer ASL33C - - MMIC Amplifier ASB C1, C2 1 F 0603 DC blocking capacitor Murata C3 1 F 0603 Feedback capacitor Murata C4 100 pF 0603 Decoupling capacitor Murata C5 1 F 0603 Decoupling capacitor Murata L1 4.7 H 0603 RF choke inductor Murata R1 1.1 k 0603 Feedback resistor Samsung R2 62 0603 Voltage drop resistor Samsung ASB Inc. [email protected] April 2017 ASL33C 3.2 Performance Table Supply voltage = +5 V, TA = +25 C, ZO = 50 Parameter Typical Unit Frequency 30 470 860 MHz Gain 21.0 19.7 17.7 dB S11 -8 -10 -12 dB S22 -14 -13 -11 dB Noise Figure 1.2 1.1 1.0 dB Output IP31) 22 24 22 dBm Output P1dB 10 11 9 dBm Current 20 mA Device Voltage +3.7 V 1) OIP3 is measured with two tones at the output power of -5 dBm/tone separated by 1 MHz. 40 30 20 10 0 -10 -20 -30 -40 -50 -60 S21 S11 S22 S12 K 0 5/15 200 ASB Inc. 400 600 Frequency (MHz) [email protected] 800 10 9 8 7 6 5 4 3 2 1 0 1000 Stability Factor, K Plot of S-parameter & Stability Factor S-parameters (dB) 3.3 April 2017 ASL33C 3.4 Plots of Noise Figure and Performances with Temperature 5 25 -40 °C +25 °C 4 20 Gain (dB) NF (dB) +85 °C 3 2 15 10 -40 °C +25 °C 1 5 +85 °C 0 0 200 400 600 Frequency (MHz) 800 1000 0 0 0 -10 -10 S22 (dB) S11 (dB) 0 -40 °C -20 200 400 600 Frequency (MHz) 800 1000 -40 °C -20 +25 °C +25 °C +85 °C +85 °C -30 -30 0 200 400 600 Frequency (MHz) 800 0 1000 30 200 400 600 Frequency (MHz) 800 1000 24 Frequency = 470 MHz 22 Gain (dB) Current (mA) 25 20 15 18 16 10 14 -60 6/15 20 -40 -20 0 20 40 Temperature (°C) 60 80 100 ASB Inc. -60 [email protected] -40 -20 0 20 40 Temperature (°C) 60 80 100 April 2017 ASL33C 2 28 Frequency = 470 MHz Frequency = 470 MHz Output IP3 (dBm) NF (dB) 1.5 1 0.5 26 24 22 20 0 18 -60 -40 -20 0 20 40 Temperature (°C) 60 80 100 -60 35 -40 -20 60 80 100 16 Frequency = 470 MHz Frequency = 470 MHz 30 14 P1dB (dBm) Output IP3 (dBm) 0 20 40 Temperature (°C) 25 20 -40 °C +25 °C 15 12 10 8 +85 °C 10 6 -10 -8 -6 -4 -2 0 2 4 Output tone power (dBm) 6 8 -60 -40 -20 0 20 40 Temperature (°C) 60 80 100 (Intentionally Blanked) 7/15 ASB Inc. [email protected] April 2017 ASL33C 4. Application: 800 ~ 2700 MHz (Wide Band, Vsupply = +5 V) 4.1 Application Circuit & Evaluation Board Vsupply = +5 V R2 C5 C4 L1 C1 RF IN C2 L2 RF OUT ASL33C R1 C3 PCB Information Material FR4 Thickness (mm) 0.8 Size (mm) 40x40 EB No. EB-363-A7 Bill of Material 8/15 Symbol Value Size Description Manufacturer ASL33C - - MMIC Amplifier ASB C1, C2 82 pF 0603 DC blocking capacitor Murata C3 100 pF 0603 Feedback capacitor Murata C4 100 pF 0603 Decoupling capacitor Murata C5 1 F 0603 Decoupling capacitor Murata L1 56 nH 0603 RF choke inductor Murata L2 27 nH 0603 Matching inductor Murata R1 1.1 k 0603 Feedback resistor Samsung R2 24 0603 Voltage drop resistor Samsung ASB Inc. [email protected] April 2017 ASL33C 4.2 Performance Table Supply voltage = +5 V, TA = +25 C, ZO = 50 Parameter Typical Unit Frequency 800 1950 2400 2700 MHz Gain 19.3 13.3 11.3 10.0 dB S11 -18 -18 -22 -22 dB S22 -18 -10 -8 -7 dB Noise Figure 0.90 1.00 1.05 1.15 dB Output IP31) 30 30 29 28 dBm Output P1dB 17.0 16.0 14.5 14.5 dBm Current 35 mA Device Voltage +4.15 V 1) OIP3 is measured with two tones at the output power of -5 dBm/tone separated by 1 MHz. 40 30 20 10 0 -10 -20 -30 -40 -50 -60 500 9/15 1000 ASB Inc. 1500 2000 Frequency (MHz) [email protected] 2500 10 9 8 S21 7 S22 6 5 S12 4 3 S11 2 K 1 0 3000 Stability Factor, K Plot of S-parameter & Stability Factor S-parameters (dB) 4.3 April 2017 ASL33C 5. Application: 1575 MHz (GPS, Vsupply = +5 V) 5.1 Application Circuit & Evaluation Board Vsupply = +5 V R2 C5 C4 L1 C1 RF IN C2 L2 RF OUT ASL33C R1 C3 PCB Information Material FR4 Thickness (mm) 0.8 Size (mm) 40x40 EB No. EB-363-A7 Bill of Material 10/15 Symbol Value Size Description Manufacturer ASL33C - - MMIC Amplifier ASB C1, C2 82 pF 0603 DC blocking capacitor Murata C3 100 pF 0603 Feedback capacitor Murata C4 100 pF 0603 Decoupling capacitor Murata C5 1 F 0603 Decoupling capacitor Murata L1 15 nH 0603 RF choke inductor Murata L2 27 nH 0603 Matching inductor Murata R1 1.1 k 0603 Feedback resistor Samsung R2 75 0603 Voltage drop resistor Samsung ASB Inc. [email protected] April 2017 ASL33C 5.2 Performance Table Supply voltage = +5 V, TA = +25 C, ZO = 50 Parameter Typical Unit Frequency 1575 MHz Gain 15 dB S11 -11 dB S22 -13 dB Noise Figure 0.9 dB Output IP31) 25 dBm Output P1dB 10 dBm Current 16 mA Device Voltage +3.8 V 1) OIP3 is measured with two tones at the output power of -5 dBm/tone separated by 1 MHz. 11/15 Plot of S-parameter & Stability Factor 40 30 20 10 0 -10 -20 -30 -40 -50 -60 1000 S21 S11 S12 K 1200 ASB Inc. 1400 1600 Frequency (MHz) [email protected] 1800 10 9 8 7 6 S22 5 4 3 2 1 0 2000 Stability Factor, K S-parameters (dB) 5.3 April 2017 ASL33C 6. Application: 50 ~ 1000 MHz (CATV, FTTH, 75 ohm, Vsupply = +3 V) 6.1 Application Circuit & Evaluation Board Vdevice = +3 V C5 C4 R3 L1 L2 C1 RF IN C2 L3 RF OUT ASL33C R1 R2 L4 C3 PCB Information Material FR4 Thickness (mm) 0.8 Size (mm) 40x40 EB No. EB-363-B4 Bill of Material Symbol Value Size Description Manufacturer ASL33C - - MMIC Amplifier ASB C1, C2 10 nF 0603 DC blocking capacitor Murata C3 1 F 0603 Feedback capacitor Murata C4 100 pF 0603 Decoupling capacitor Murata C5 10 F 0805 Decoupling capacitor Murata L1 820 nH 0603 RF choke inductor Murata L2 8.2 nH 0603 Matching inductor Murata L3 6.8 nH 0603 Matching inductor Murata L4 39 nH 0603 Feedback inductor Murata R1 820 0603 Feedback resistor Samsung R2 360 0603 Feedback resistor Samsung 47 k 0603 Current adjust resistor Samsung R3 12/15 ASB Inc. [email protected] April 2017 ASL33C 6.2 Performance Table Supply voltage = +3 V, TA = +25 C, ZO = 75 Parameter Typical Frequency 50 500 1000 MHz Gain 23.0 23.2 22.1 dB S11 -19 -19 -17 dB S22 -10 -14 -16 dB Noise Figure 0.85 0.95 0.95 dB Output IP31) 32.0 32.0 31.5 dBm 42.0 42.0 46.5 dBm Output P1dB 17.0 17.0 16.5 dBm Current 45 mA Device Voltage +3 V Output IP21), 2) Unit 1) OIP3 and OIP2 are measured with two tones at the output power of +0 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1 + F2 Frequency. 40 30 20 10 0 -10 -20 -30 -40 -50 -60 S21 S22 S11 S12 K 0 13/15 200 ASB Inc. 400 600 Frequency (MHz) [email protected] 800 10 9 8 7 6 5 4 3 2 1 0 1000 Stability Factor, K Plot of S-parameter & Stability Factor S-parameters (dB) 6.3 April 2017 ASL33C 7. Package Outline (SOT363, 2.1x2.0x1.0 mm) Symbols 33C A A1 A2 b C D F E1 e e1 L Dimensions (In mm) MIN NOM 0.900 1.000 0.025 0.062 0.875 0.937 0.200 0.300 0.100 0.125 1.900 2.000 1.150 1.250 2.000 2.100 0.65BSC 1.30BSC 0.425REF MAX 1.10 0.10 1.00 0.40 0.15 2.10 1.35 2.20 8. Surface Mount Recommendation (In mm) 1.48 NOTE 0.25 0.30 1. The number and size of ground via holes in a circuit board are critical for thermal and RF grounding considerations. 0.30 1.23 14/15 1.33 0.50 0.40 1.75 0.42 ASB Inc. 2. Recommend is that the ground via holes be placed on the bottom of the ground lead pin 2 for better RF and thermal performance, as shown in the drawing at the left side [email protected] April 2017 ASL33C 9. Recommended Soldering Reflow Profile 260 C 20~40 sec Ramp-up (3 C/sec) Ramp-down (6 C/sec) 200 C 150 C 60~180 sec (End of Datasheet) Copyright 2012-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no responsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of ASB. 15/15 ASB Inc. [email protected] April 2017