6060 POWER INDUCTORS OutgassingCompliantPowerInductors AE524PYA ■ Exceptionally low DCR; soft saturation ■ Passes vibration testing to 80 G and shock testing to 1000 G ■ Passes NASA low outgassing specifications ■ High temperature materials allow operation in ambient temperatures up to 165°C. ■ Tin-lead (Sn-Pb) terminations for the best possible board adhesion Terminations Tin-lead (63/37) over copper. Core material Composite Weight 1.2 – 1.3 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 400/7″reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.12 mm pocket depth Part number1 AE524PYA681MSZ AE524PYA102MSZ AE524PYA182MSZ AE524PYA222MSZ AE524PYA302MSZ AE524PYA472MSZ AE524PYA562MSZ AE524PYA682MSZ AE524PYA822MSZ AE524PYA103MSZ AE524PYA153MSZ AE524PYA223MSZ Inductance2 ±20% (µH) 0.68 1.0 1.8 2.2 3.0 4.7 5.6 6.8 8.2 10 15 22 DCR (mOhms)3 typ max 3.10 3.41 3.81 4.19 5.30 5.83 6.00 6.60 7.45 8.19 14.90 16.40 16.22 17.84 18.90 20.80 24.00 26.40 27.00 29.82 39.77 43.75 55.12 60.63 SRF (MHz)4 min typ 47 59 37 47 28 36 24 31 20 26 16 21 16 20 14 18 12 16 11 14 8.8 11 7.2 9 1. When ordering, please specify testing code: AE524PYA332MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 4395A or equivalent. 5. Typical dc current at which the inductance drops 30% from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Irms (A)6 20°C rise 40°C rise 14.3 18.8 12.8 17.3 10.5 13.5 9.8 12.8 9.0 12.0 5.3 7.5 5.3 7.5 5.3 6.8 4.5 6.0 3.8 5.3 3.4 4.5 2.7 3.8 Irms Testing Irms testing was performed on a 0.060″ thick pcb with 4 oz. copper traces optimized to minimize additional temperature rise. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. Document AE799-1 Revised 09/24/12 ® © Coilcraft, Inc. 2012 Isat (A)5 23 21 18.1 16.4 14.6 10.5 9.9 9.2 8.4 7.6 5.8 5.6 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 6060 POWER INDUCTORS AE524PYASeries Inductance (µH) 1.0 0.8 0.6 0.68 µH 0.4 0.2 0 0 5 10 15 20 Current (A) 25 Inductance (µH) 1.6 1.2 1.0 µH 0.8 0.4 0 0 5 10 15 20 Current (A) 2.4 2.0 1.6 1.8 µH 1.2 0.8 0.4 0 8 7 6 5 4 3 2 1 0 Inductance (µH) 1.0 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 8 7 6 5 4 3 2 1 0 0 2 4 6 8 10 12 14 Current (A) 16 18 20 Inductance (µH) 0.5 0 3.0 µH 0 2 4 6 8 10 12 14 Current (A) 16 18 20 Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) 2.2 µH 1.5 4.7 µH 0 1 2 3 4 5 6 7 Current (A) 8 9 10 11 12 1 2 3 5 6 7 8 9 10 11 12 7 8 9 10 11 12 Current (A) 8 6.8 µH 4 2 1 2 3 4 5 6 Current (A) 12 10 8 8.2 µH 6 4 2 0 0 1 2 3 4 5 6 7 8 9 10 6 7 8 9 10 Current (A) 16 12 10 µH 8 4 0 0 1 2 3 4 5 Current (A) 20 16 12 15 µH 8 4 0 0 1 2 3 4 Current (A) 5 6 7 8 5 6 7 8 30 25 20 22 µH 15 10 5 0 0 1 2 3 4 Current (A) Document AE799-2 Revised 09/24/12 ® © Coilcraft, Inc. 2012 4 6 Current (A) 2.0 0 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 3.0 2.5 5.6 µH 10 25 Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) L vs Current 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 6060 POWER INDUCTORS AE524PYASeries L vs Frequency 0.250 ±0.008 6,36 ±0,2 100 0.258 ±0.008 6,56 ±0,2 Inductance (µH) 22 µH 15 µH 10 µH 10 5.6 µH 4.7 µH 3.0 µH 2.2 µH 1.8 µH 1 1.0 µH 0.68 µH 0.240 max 6,10 0.1 0.1 10 1 A ±0.008 in Dash ±0,20 mm number (in / mm) -681 0.213 / 5.42 -102 0.213 / 5.42 -122 0.213 / 5.42 -182 0.213 / 5.42 -222 0.213 / 5.42 -302 0.204 / 5.18 -472 0.204 / 5.18 -562 0.204 / 5.18 -682 0.204 / 5.18 -822 0.201 / 5.12 -103 0.201 / 5.12 -153 0.200 / 5.08 -223 0.200 / 5.08 Suggested Recommended Land Pattern Land Pattern 100 Frequency (MHz) 0.159 4,04 0.049 ±0.002 1,25 ±0,05 Irms Derating B (in / mm) 0.224 / 5.69 0.224 / 5.69 0.224 / 5.69 0.224 / 5.69 0.224 / 5.69 0.210 / 5.33 0.210 / 5.33 0.210 / 5.33 0.210 / 5.33 0.206 / 5.24 0.206 / 5.24 0.204 / 5.18 0.204 / 5.18 120 A (see table) 110 B (see table) 90 80 0.110 ±0.01 2,79 ±0,25 70 60 Dimensions are in 50 40 0.056 1,43 inches mm 25°C Percent of rated Irms 100 30 20 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Document AE799-3 Revised 09/24/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.