Switching Power Supplies ESP Series 18 - 150 Watt Features Compact boxed Power Supplies with Screw Terminal Block Universal Input 85-264 VAC, 50/60 Hz EMI / EMC Compliance with EN 50081-1 and EN 50082-1 Short Circuit and Overvoltage Protection High Efficiency International Safety Approvals Industrial Grade Components 3 Year Product Warranty This range of very compact switching power supplies are designed for all applications, where high reliability and long lifetime are important. They provide excellent electric specifications and full compliance to the European EMC and Low Voltage Directive. Universal input and international safety approvals qualify these power supplies for worldwide use. With their low profile case and screw terminal block they are easy to install in any equipment. Models with Single Output Ordercode ESP 18-05SN ESP 18-12SN ESP 18-15SN ESP 18-24SN ESP 18-48SN ESP 36-05SN ESP 36-12SN ESP 36-15SN ESP 36-24SN ESP 36-48SN ESP 60-05SN ESP 60-12SN ESP 60-15SN ESP 60-24SN ESP 60-48SN http://www.tracopower.com Output Power 18 Watt 36 Watt 60 Watt Output Voltage Output Current max. 230VAC (115 VAC) 5 VDC 12 VDC 15 VDC 24 VDC 48 VDC 3.6 A (3.0A) 1.5 A (1.3A) 1.2 A (1.0A) 0.8 A (0.7A) 0.4 A (0.35A) 5 VDC 12 VDC 15 VDC 24 VDC 48 VDC 6.0 3.0 2.5 1.5 0.8 A A (2.6A) A (2.1A) A (1.4A) A (0.7A) 5 VDC 12 VDC 15 VDC 24 VDC 48 VDC 10.0 5.0 4.0 2.5 1.1 A A (4.3A) A (3.5A) A (2.2A) A Page 1 of 7 Switching Power Supplies ESP Series 18-150 Watt Models with Single Output Ordercode ESP 75-05S ESP 75-12S ESP 75-15S ESP 75-24S ESP 75-48S ESP 100-05S ESP 100-12S ESP 100-15S ESP 100-24S ESP 100-48S ESP 150-05S ESP 150-12S ESP 150-15S ESP 150-24S ESP 150-48S Output Power 75 Watt 100 Watt 150 Watt Output Voltage Output Current max. 5 VDC 12 VDC 15 VDC 24 VDC 48 VDC 15.0 6.5 5.2 3.2 1.6 A A A A A 5 VDC 12 VDC 15 VDC 24 VDC 48 VDC 20.0 8.6 7.0 4.4 2.2 A A A A A 5 VDC 12 VDC 15 VDC 24 VDC 48 VDC 30.0 13.0 10.0 6.5 3.3 A A A A A Input Specifications Input voltage range 85 – 264 VAC (all models) 110 – 350 VDC (only ESP 18/36/60) Input frequency 47 – 63 Hz Input current (at full load) Recommended circuit breaker (characteristic C) or slow blow fuse ESP 18 ESP 36 ESP 60 ESP 75 ESP 100 ESP 150 Vin = 115 VAC 0.33 A typ. 0.65 A typ. 1.10 A typ. 0.95 A typ. 1.3 A typ. 1.9 A typ. ESP 18/36/60/75 ESP 100/150 5A 10 A ESP 18 ESP 36 ESP 60 ESP 75 ESP 100 ESP 150 Vin = 115 VAC 100 ms max. 100 ms max. 100 ms max. 1700 ms max. 1600 ms max. 1600 ms max. Start-up time Vin = 230 VAC 0.23 A typ. 0.40 A typ. 0.72 A typ. 0.45 A typ. 0.65 A typ. 0.85 A typ. Vin = 230 VAC 100 ms max. 100 ms max. 100 ms max. 800 ms max. 800 ms max. 740 ms max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 7 Switching Power Supplies ESP Series 18-150 Watt Output Specifications Output voltage adjustment range Regulation ± 10 % – Input variation 0.1 % max. (0.2% max. for 5 VDC model) – Load variation (0 – 100 %) 0.4 % max. (0.8% max. for 5 VDC model) Ripple and noise (20Mhz Bandwidth) 75 mV pk-pk max. Output current limitation > 105 % Inom. Overload protection mode ESP 18 – 150 Constant current Over voltage protection (only output 1) 115 – 150 % Vout nom. Capacitive load < 10’000 µF General Specifications Temperature ranges – Operating – Derating above 50°C all models – Storage (non operating) Temperature coefficient 0 °C…+60 °C 2.0% /K – 20 °C…+85 °C 0.02 % /K Efficiency 73 – 87 % (depending on model) Humidity (non condensing) 85 % rel max. Switching frequency Vin = 115 VAC Vin = 230 VAC ~100 kHz ~150 kHz ESP 18 (FM modulation) ESP 36 (FM modulation) ~ 80 kHz ~130 kHz ESP 60 (FM modulation) ~ 50 kHz ~100 kHz ESP 75 (PWM modulation) ~120 kHz ~120 kHz ESP 100 (PWM modulation) ~140 kHz ~140 kHz ESP 150 (PWM modulation) ~135 kHz ~135 kHz Hold-up time ESP 18 ESP 36 ESP 60 ESP 75 ESP 100 ESP 150 Vin = 115 VAC Vin = 230 VAC 20 ms typ. 120 ms typ. 20 ms typ. 120 ms typ. 20 ms typ. 120 ms typ. 50 ms typ. 40 ms typ. 50 ms typ. 50 ms typ. 50 ms typ. 40 ms typ. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 7 Switching Power Supplies ESP Series 18-150 Watt General Specifications Isolation voltage – Input/ Output – Input/ Case – Outpu/ Case 3‘000 VAC 1‘500 VAC 500 VAC Reliability /calculated MTBF (MIL-HDBK-217E) – ESP 18/ 36 – ESP 60 – ESP 75/ 100/ 150 > 200‘000 h @ 25°C > 170‘000 h @ 25°C > 90’000 h @ 25°C ELectromagnetic compatibility (EMC), Emissions – Conducted RI suppression – Harmonic current emissions EN 55022, class B, FCC part 15, level B IEC / EN 61000-3-2, class D equipment (ESP 75/ 100/ 150 only) ELectromagnetic compatibility (EMC), Immunity (all single output models) – Electrostatic discharge ESD IEC / EN 61000-4-2 – RF field immunity – Electrical fast transients/burst immunity – Surge Immunity – Voltage dips, short int. and voltage variation 4 kV / 8 kV IEC / EN 61000-4-3 10 V / m IEC / EN 61000-4-4 1 kV IEC / EN 61000-4-5 1/2 kV IEC / EN 61000-4-11 Safety standards UL 60950, IEC/EN 60950 Safety approval cUL /UL ( E141988) Case material stainless steel All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 4 of 7 Switching Power Supplies ESP Series 18-150 Watt Outline Dimensions mm (inches) ESP 18 15max. 86.5 (3.41) (0.59) 57.0 ±0.5 7 32.0 (1.26) 17.0 62.0 ±0.5 (0.67) (2.44±0.02) (0.28) 71.0 (2.80) +V -V FG AC L IN N (2.24±0.02) 2 X M3 thread (bottom) 9.5 66.0 ±0.5 (0.37) (2.60±0.02) Weight ESP 18 200 g (0.44 lb) ESP 36 300 g (0.66 lb) 115.0 (4.53) 15max. ESP 36 (0.59) 15 2 X M3 thread (bottom) (0.59) 17 87.0±0.5 (3.43±0.02) 61.0±0.5 (2.40±0.02) (0.28) (0.59) 75.0 -V FG 7 (2.95) +V 15 (0.67) AC L IN N 32.0 (1.26) 2xM3 (mounting holes) bottom 2xM3 (mounting holes) 9.5 81.0±0.05 (0.37) (3.19±0.02) Tolerance ±1 (±0.04) Specifications can be changed without notice http://www.tracopower.com Page 5 of 7 Switching Power Supplies ESP Series 18-150 Watt Outline Dimensions mm (inches) ESP 60 18 134.5 (5.30) 110.0±0.5 (4.33±0.02) 66.5±0.5 7 80.5 (3.15) +V -V FG AC L IN N 37.0 2x M3 (mounting holes) bottom (1.46) (2.71±0.02) (0.59) (0.28) 15max. 18 9.5 106.0±0.5 (0.37) (4.17±0.02) Weight 162.0 ESP 75 (1.398) (3.465) 35.5 (0.59 max.) +V 88.0 15.0 max. FG (0.71) 2x M3 (mounting holes) ESP 60 480 g (1.06 lb) ESP 75 540 g (1.19 lb) (6.378) 114.5 ±0.5 (4.508 ±0.02) 42.5 ±0.5 AC IN L N M 4 thread (1.673 ±0.02) 0 M 3 thread (bottom) 18.0 (0.709) 38.5 (1.516) M 3 thread 7.5 147.0 ±0.5 (5.787 ±0.02) (0.295) Tolerance ±1 (±0.04) Specifications can be changed without notice http://www.tracopower.com Page 6 of 7 Outline Dimensions mm (inches) 187.0 20.0 40.0 (0.787) (1.575) (7.362) 132.0 ±0.5 (5.197 ±0.02) AC IN 41.0 93.0 (3.661) +S +V -V -S FG L N (1.614) ESP 100 M 4 thread (bottom) 170.0 ±0.5 (6.693 Weight 196.0 15.5 (0.787 max.) (0.610) 107.0 ESP 100 740 g (1.63 lb) ESP 150 980 g (2.16 lb) (7.717) 171.0 ±0.5 (6.732 ±0.02) +S +V -V -S FG L N AC IN 10.0 21.0 (1.772) 45.0 M 4 thread 8.5 M 4 thread (bottom) 176.5 (0.827) 20.0 max. (4.213) V Adj. ±0.02) 88.5 ±0.5 (3.484 ±0.02) ESP 150 (0.827) 21.0 7.5 (0.295) (0.335) (0.709) 18.0 39.0 (1.535) M 4 thread ±0.5 (6.949 ±0.02) (0.394) Tolerance ±1 (±0.04) Specifications can be changed without notice Rev. 06/05 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41 43311 4511 • Fax +41 43311 4545 • [email protected] • www.tracopower.com Page 7 of 7