Medium Power Film Capacitors FFV3 General Description DC FILTERING DC FILTERING The series uses a non-impregnated metallized polypropylene or polyester dielectric, with the controlled self-healing process, specially treated to have a very high dielectric strength in operating conditions up to 105°C. The FFV3 has been designed for printed circuit board mounting. General tolerance: ±0.5 (±0.020) Dimensions: millimeters (inches) B 1.2 (0.048) B A 1 2 1 2 3 4 30 (1.181) 4 3 25 (0.984) 0.6 (0.024) A APPLICATIONS Plastic Case 16 (0.630) The FFV3 capacitors are particularly designed for DC filtering, low reactive power. 40 (1.575) PACKAGING Self-extinguishing plastic case (V0 = in accordance with UL 94) filled thermosetting resin. Self-extinguishing thermosetting resin (V0 = in accordance with UL 94; I3F2 = in accordance with NF F 16-101). 1.2 (0.047) ±0.1 (0.004) 40 (1.575) 0.8 (0.032) ±0.1 (0.004) 4.5 (0.178) ±1 (0.040) 36 (1.418) LIFETIME EXPECTANCY STANDARDS One unique feature of this technology (as opposed to electrolytics) is how the capacitor reacts at the end of its lifetime. Whereas, with an electrolytic, there is a strong risk of explosion of the case. However, with our line of film capacitors, the capacitor will simply experience at the end of life a loss of capacitance of about 2%, with no risk of explosion. Please note that this is theoretical, however, as the capacitor continues to be functional even after this 2% decrease. IEC 61071-1, IEC 61071-2: Power electronic capacitors IEC 60384-16: Fixed metallized polypropylene film dielectric DC capacitors IEC 60384-16-1: Fixed metallized polypropylene film dielectric DC capacitors Assessment level E IEC 60384-17: Fixed metallized polypropylene film dielectric AC and pulse capacitors IEC 60384-17-1: Fixed metallized polypropylene film dielectric AC and pulse capacitors Assessment level E IEC 60384-2: Fixed metallized polyester capacitors ELECTRICAL CHARACTERISTICS Climatic category Test voltage between terminals @ 25°C Test voltage between terminals and case @ 25°C 10 40/105/56 (IEC 60068) 1.5 x Vndc during 10s @ 4 kVrms @ 50 Hz during 1 min. Medium Power Film Capacitors FFV3 for Low Voltage Applications DC FILTERING DC FILTERING POLYESTER DIELECTRIC ELECTRICAL CHARACTERISTICS Capacitance range Cn Tolerance on Cn Rated DC voltage Vndc Dielectric Capacitance (µF) Vndc = 75 V 130 160 Vndc = 100 V 80 100 Vndc = 160 V 55 65 Vndc = 300 V 40 50 Vndc = 400 V 30 40 30µF to 160µF ±10% 75 to 400 V polyester Irms max. (A) Vrms = 45 v max 23 28 Vrms = 60 v max 19 24 Vrms = 75 v max 17 20 Vrms = 90 v max 20 26 Vrms = 105 v max 17 23 (I2t)10 shots (A2s) (I2t)1000 shots (A2s) Rs (m⍀) Rth (°C/W) Part Number 370 560 37 56 0.56 0.47 5.60 5.00 FFV34D0137K-FFV34D0167K-- 250 390 25 39 0.67 0.55 6.16 5.42 FFV34E0806K-FFV34E0107K-- 180 260 18 26 0.77 0.66 6.56 5.97 FFV34F0556K-FFV34F0656K-- 150 230 15 23 2.80 2.25 9.58 8.46 FFV34H0406K-FFV34H0506K-- 110 200 11 20 2.93 2.21 9.92 8.41 FFV34I0306K-FFV34I0406K-- LIFETIME EXPECTANCY vs Vw/Vn AND HOT SPOT TEMPERATURE 1.2 50°C 1.1 60°C 1.0 Vw/Vndc 0.9 85°C 0.8 70°C 95°C 0.7 0.6 105°C 0.5 0.4 0.3 100 1000 10000 100000 Lifetime Expectancy (hours) Vw = Permanent working or operating DC voltage. HOT SPOT CALCULATION θhot spot = θambient + (Pd + Pt) x (Rth + 7.4) θhot spot = θcase + (Pd + Pt) x Rth with Pd (Dielectric losses) = Q x tgδ0 ⇒ [ 1⁄2 x Cn x (Vpeak to peak)2 x f ] x tgδ0 (see tgδ0 curves page 3) Pt (Thermal losses) = Rs x (Irms)2 where Cn in Farad Irms in Ampere f in Hertz θ in °C V in Volt Rs in Ohm Rth : Rth case/hot spot in °C/W Rth in °C/W 11 Medium Power Film Capacitors FFV3 DC for Medium and High Voltage Applications DC FILTERING Capacitance range Cn Tolerance on Cn Rated DC voltage Vndc Dielectric Capacitance (µF) Vndc = 500 V 20 25 Vndc = 700 V 14 20 Vndc = 900 V 10 13 Vndc = 1100 V 6 9 Irms max. (A) Vrms = 105 v max 27 33 Vrms = 120 v max 21 30 Vrms = 150 v max 19 25 Vrms = 180 v max 13 20 6µF to 25µF ±10% 500 to 1100 V polypropylene (I2t)10 shots (A2s) (I2t)1000 shots (A2s) Rs (m⍀) Rth (°C/W) Part Number 3200 5000 320 500 5.88 4.72 3.53 3.14 FFV36J0206K-FFV36J0256K-- 2000 4200 200 420 7.34 5.15 3.73 3.05 FFV36A0146K-FFV36A0206K-- 1600 2800 160 280 8.21 6.33 3.37 2.91 FFV36C0106K-FFV36C0136K-- 800 1900 80 190 11.4 7.61 3.71 2.92 FFV36L0605K-FFV36L0905K-- LIFETIME EXPECTANCY vs Vw/Vn AND HOT SPOT TEMPERATURE 1.2 60°C 1.1 Vw/Vndc DC FILTERING POLYPROPYLENE DIELECTRIC ELECTRICAL CHARACTERISTICS 50°C 70°C 80°C 1.0 85°C 1.9 95°C 0.8 105°C 0.7 100 1000 10000 100000 Lifetime Expectancy (hours) Vw = Permanent working or operating DC voltage. HOT SPOT CALCULATION θhot spot = θambient + (Pd + Pt) x (Rth + 7.4) θhot spot = θcase + (Pd + Pt) x Rth with Pd (Dielectric losses) = Q x tgδ0 ⇒ [1⁄2 x Cn x (Vpeak to peak)2 x f ] x (2 x 10-4) Pt (Thermal losses) = Rs x (Irms)2 where Cn in Farad Irms in Ampere f in Hertz θ in °C V in Volt Rs in Ohm Rth : Rth case/hot spot in °C/W Rth in °C/W 12