Astrodyne AHP1001D-03 Medical grade class ii 10 watt adapter Datasheet

AHP1001
M edi c a l Gr a d e C las s I I 10 Wat t A dapt er
series
10 Watt, Wall Mount
medical
Single Outputs of 3.3VDC to 55VDC
80-275VAC Input Operating Range
Option “B”
Option “A”
HPU63B series
63
4000VAC Input to Output Isolation
The HPU63B series of AC/DC switching mode power supplies
provide 63 Watts of continuous output power . All supplies are
4 UL94V-1
Input Plug
min Options
compliant. All models meet FCC Part-18 class B and
CISPR-11 EN55011 class B emission Limits and are designed to
UL60601-1
EditionESApprovals
comply with3rd
ANSI/AAMI
60601-1: 2005(UL/cUL 3rd Edition), EN
60601-1:2006 (TUV/T-mark 3rd Edition) and new CE requirements.
All units are 100% burned in and tested.
Option “C”
Option “D”
RoHS2
2011/65/EU
Model Number
Output Output
Output
VDC Amps (max.) Power
Efficiency Ripple &
FL, 230VAC Noise
Total
No Load
Regulation Consumption
FEATU
* Wide O
* IEC-32
* Single
* Over V
* Medic
* Input t
* Energy
* Class II
* 3 year
APPLIC
*AHP1001 (A, B, C, or D)-01
3.3
1.82
6 Watts
65% typ.
66 mV p-p ±5%
0.2 Watts
* Home
* Patien
* Blood
* Portab
* ECG m
*AHP1001 (A, B, C, or D)-02
5
1.6
8 Watts
80% typ.
50 mV p-p ±5%
0.3 Watts
GENER
*AHP1001 (A, B, C, or D)-03
6
1.33
8 Watts
81% typ.
60APPROVALS:
mV p-p ±5%
0.3 Watts
*AHP1001 (A, B, C, or D)-04
10
1.0
10 Watts
83% typ.
80 mV p-p ±5%
*AHP1001 (A, B, C, or D)-05
12
0.83
10 Watts
84% typ.
0.3 Watts
CB
100 mV p-p ±5%
0.3 Watts
*AHP1001 (A, B, C, or D)-06
15
0.66
10 Watts
85% typ.
100 mV p-p ±5%
*AHP1001 (A, B, C, or D)-07
18
0.55
10 Watts
86% typ.
*AHP1001 (A, B, C, or D)-08
24
0.42
10 Watts
86% typ.
100
mV p-p ±5% Characteristic
0.3 Watts
Symbol
Safety
Approval Input
Vins
100
mV p-p
±5%
0.3Voltage
WattsRange
*AHP1001 (A, B, C, or D)-09
30
0.33
10 Watts
86% typ.
Input
Operate Voltage
VinmV p-p
100
±3%
0.3Range
Watts
*AHP1001 (A, B, C, or D)-10
36
0.27
10 Watts
86% typ.
100 mV p-p ±3%
*AHP1001 (A, B, C, or D)-11
48
0.21
10 Watts
86% typ.
*AHP1001 (A, B, C, or D)-12
55
0.18
10 Watts
86% typ.
100
mV p-p
0.3 Watts
Low±3%
Line Input Current
Iil
SINGLE OUTPUT
* Note:
EN 60601-1
IEC 60601-1
0.3 Watts
Electrical Characteristics:
Fi
Input Frequency
Po
Output Power Range
0.3 Watts
100
0.3 Watts
High±3%
Line Input Current
Iih mV p-p
Detail to see Fig.1 (Derate linearly
Sine wave
See Rating Chart
Full Load, Vin=100VAC
Full Load, Vin=240VAC
Irl
Low Line Input Inrush Current
Full Load, 25°C, Cool start, Vin=1
High Line Input Inrush Current
Full Load, 25°C, Cool start, Vin=2
Efficiency
WWW.ASTRODYNETDI.COM
Safety Approval & Specification i
Irh
The Asterisk (*) denotes a choice of AC Input Connectors (A, B, C, or D option; i.e. AHP1001B-101).
TheLine
options
are as follows:
Regulation
△Voi
A: 2 Prong U.S. Plug in a Slimeline Package (Good for use in space deficient power strips!)
Over Voltage Protection
OVP
B: 3 Prong UK Plug
OLP
Over Load Protection
C: 2 Prong Euro Plug
Time of Transient Response
ttr
D: 2 Prong U.S. Plug in a Wallmount Package
Please see Mechanical Dimensions.
PS
E
* Short C
* Coolin
* Flamm
* Protec
* Safety
(TUV/T-m
Full Load, Vin=230VAC, Detail to
Full Load, Vin=100~120VAC or 20
Recovers automatically after fau
Full Load, Vin=110VAC
thu
Hold-Up Time
Full Load, Vin=100VAC
ts
Start-up time
Full Load, Vin=100~240VAC
HV
Dielectric Withstanding Voltage (P-S)
Primary to Secondary, limit curre
EMI
EMC Emission
Compliance to EN55011 (CISPR1
All specifications areTemperature
typical at nominal
input, full load, and 25°C unless otherCoefficient
Tc
All Condition
wise noted
Environmental:
Symbol
To
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
Characteristic
Operating Temperature
Detail to see Fig.2 (Derate linearly
AHP1001
M edi c a l Gr a d e C las s I I 10 Wat t A dapt er
INPUT SPECIFICATIONS
Input Voltage Range (See I/P
series
ENVIRONMENTAL SPECIFICATIONS
80-275 VAC (100-240VAC Nom.)
Operating Temperature
-10 to +70°C
See Input Derate Curve (Fig 1)
See Temp Derate Curve (Fig 2)
Frequency Range
Sine Wave, 47-63 Hz
Storage Temperature
-40 to +85°C, 10~95% RH *
Inrush I, Cold Start, FL 25°C
40A @ 100VAC *
Operating & Storage Humidity
0% to +95%,
100A @ 240VAC FL *
Non-Condensing *
Input Current (100Vin/240Vin)
0.3A max./0.2A max. FL
Cooling
Free Air Convection
Protection Class
Double Insulated, Class II
Surge Voltage
2kV, min.
EMC Emission
EN55011 (CISPR11)
OUTPUT SPECIFICATIONS
EN61000-3-2, -3 Class B
ESD
Contact 6KV, Air 8KV
IEC61000-4-2
Voltage and Current
See Selection Chart Page 1
Vibration
5G Min.
Line Regulation HL-LL
±1%, max. FL
Operating Altitude (Elevation)
3000m max.
Total Regulation
See Selection Chart Page 1
10 ~ 500Hz, 10min./1cycle,
Ripple/Noise (See Note)
See Selection Chart Page 1
60min. each along X, Y, Z axes
Over Load Protection
110-150% max. Auto Recovery *
Short Circuit Protection
Auto Recovery *
Transient Response
4mS at FL, 110VAC
Start Up Time
2S, min. at FL, 100VAC
Hold Up Time
12mS, min. at FL, 100VAC
Temperature Coefficient
±0.04%/°C
MTBF
100,000 Hrs, min.
MIL-HDBK-217F, 25°C
Flammability Rating
UL94V-1
GENERAL SPECIFICATIONS
Isolation
I/P-O/P: 4000VAC
PHYSICAL SPECIFICATIONS
Limit Current <10mA
O/P-Ground: 707VDC 60S
Size L x W x H (Inches/mm)
Weight
2.2” x 1.73” x 1.08” /
Insulation Resistance
≥20MΩ, 500V, 1S, I/P to O/P
56 x 44 x 27.5mm
Efficiency at FL & Nominal Line
See Selection Chart
90g typ.
Safety
ANSI/AAMI ES60601-1:2005
UL/cUL:
3rd ed.
NOTE
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
WWW.ASTRODYNETDI.COM
Ripple & Noise is measured by using a 20MHz bandwidth limited
oscilloscope and terminating each output with a 0.47uF capacitor at FL
and Nominal line.
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
oscilloscope and terminated each output with a 0.47uF capacitor at
rated load and nominal line.
6. Hold up time is measured from the end of the last charging pulse to the
time which the main output drops down to low limit of main output at
rated load and nominal line.
7. Efficiency is measured at rated load, and nominal line.
8. The specifics for testing the energy efficiency of this Series are outlined
in a separate document titled "Test Method for Calculating the Energy
Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power
Supplies (August 11, 2004)," which is available on the ENERGY STAR
Website.
medical
rated load and nominal line.
6. Hold up time is50measured
from120
the end
of the160last charging
pulse to220the
80
100
140
180
200
time which the main output drops down to lowINPUT
limitVOLTAGE
of main(VAC)
output at
(FIG.1) INPUT VOLTAGE DERATING CURVE
rated load and nominal line.
110
7. Efficiency is measured
at rated load, and nominal line.
100
8. The specifics for testing the energy efficiency of this Series are outlined
90
in a separate document titled "Test Method for Calculating the Energy
80
Efficiency of Single-Voltage
Interchangeable AC-DC and AC-AC Power
70
Supplies (August 11, 2004)," which is available on the ENERGY STAR
60
Website.
50
20
10
110
90
80
70
60
50
40
series
30
20
10
0
-10
0
10W
80
(FIG.2) TEMPERATURE DERATING CURVE
MECHANICAL
DIMENSIONS:
( UNIT: mm )
SPECIFICATION
NOTE : AHP1001B
110
OUTPUT
RECOMMEND
: load when the power supply starts up.
1. OutputCABLE
can provide
up to peak
100
1. Selected
output
connectors
and wire,
to Appendix.
Continuous
staying
in more than
ratedplease
load is refer
not allowed.
2.
HPU10A-101~105
are required
to use AWG#20/4FT
cable.
2.
At
factory,
in
60%
rated
load
condition,
each
output
isoutput
checked
to be
90
3. HPU10A-106~112
are required to use AWG#24/4FT output cable.
within voltage accuracy.
4.
efficiency
will be changed
by modified
3. The
Line regulation
regulation and
is defined
by changing
±10% of input
voltageoutput
from cable.
80
nominal line at rated load.
PACKING
:
4. Load regulation
is defined by changing ±40% of measured output load
70
1. Net
90g load.
approx.
fromweight:
60% rated
2.
output
available
contact
sales for limited
details.
60
5. Optional
Ripple & noise
is connectors
measured by
using 20MHz
bandwidth
OUTPUT CABLE 1R
1. Selected outpu
1
2. HPU10B-101~1
3. HPU10B-106~1
4. The regulation
LOAD (%)
MECHANICAL DIMENSIONS:
20
30
40
50
60
70
-10
0
10
10W External
Medical
Grade
Power
Supply
TEMPERATURE
(°C)
HPU10D
series
LOAD (%)
AHP1001A
SPECIFICATION NOTE :
UNIT:supply
mm ) starts up.
1. Output can provide up to peak load when the( power
Continuous staying in more than rated load is not allowed.
2. At factory, in 60% rated load condition, each output is checked to be
within voltage accuracy.
3. Line regulation is defined by changing ±10% of input voltage from
nominal line at rated load.
4. Load regulation is defined by changing ±40% of measured output load
from 60% rated load.
5. Ripple & noise is measured by using 20MHz bandwidth limited
oscilloscope and terminated each output with a 0.47uF capacitor at
rated load and nominal line.
6. Hold up time is measured from the end of the last charging pulse to the
time which the main output drops down to low limit of main output at
rated load and nominal line.
7. Efficiency is measured at rated load, and nominal line.
8. The specifics for testing the energy efficiency of this Series are outlined
in a separate document titled "Test Method for Calculating the Energy
Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power
Supplies (August 11, 2004)," which is available on the ENERGY STAR
Website.
1
100
0
HPU10C series
100
280
medical
30
MECHANICAL DIMENSIONS
260
AHP1001
40
M edi c a l Gr a d e C las s I I 10 Wat t A dapt er
80
240
PACKING :
1. Net weight: 90
2. Optional outpu
oscilloscope and terminated each output with a 0.47uF capacitor at
rated 100
load and
nominal
line.160
120
140
180
200
220
240
260
280
6. Hold up time is measured fromINPUT
theVOLTAGE
end of (VAC)
the last charging pulse to the
(FIG.1) INPUT VOLTAGE DERATING CURVE
CAUTION
time which the main output drops down to low limit of main output at
110
rated load and nominal line.
100
7.
Efficiency
is measured at rated load, and nominal line.
90
8. The specifics for testing the energy efficiency of this Series are outlined
80
in a separate document titled "Test Method for Calculating the Energy
70
Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power
60
Supplies (August 11, 2004)," which is available on the ENERGY STAR
50
Website.
40
50
80
1
1
30
Rating Chart:
20
10
(A)
3.0
5.0
1.20
HPU10A-102
5.0
6.0
1.33
HPU10A-103
6.0
8.0
1.00
HPU10A-104
8.0
11.0
0.90
HPU10A-105
11.0
13.0
0.76
HPU10A-106
16.0
16.0
21.0
0.62
0.47
HPU10B-102 6
5.0 66
6.0
2.00
65 1.330.2
121.60 OLP
±5
PACKING :
1.00
6.0
8.0
HPU10B-103
1.60
81. Net weight:5090g approx.
80
0.3
121.33 OLP
±5
1.25 OLP
0.90
11.0
8.0
HPU10B-104
2.
Optional
output
connectors
available
contact
sales
for
details.
±5
81
0.3
60
8
1.33
12
0.76
13.0
11.0
HPU10B-105
±5
0.3
83
80
10
1.25
120.90 OLP
HPU10B-106 10
0.90
HPU10B-107 10
0.76
HPU10B-108 10
0.62
13.0 100
27.0 100
40.0
0.25
HPU10A-111
40.0
50.0
0.20
HPU10B-112 10
0.25
HPU10A-112
50.0
55.0
0.19
0.20
HPU10A-108
HPU10A-109
21.0
27.0
27.0
33.0
0.37
0.30
86
40.0 100
50.0 100
55.0
±3
86
±3
86
100
86
60
10
80
10
100
OLP
10
100
OLP
10
100
OLP
10
100
100
0.370.3
0.300.3
120.47
120.37
OLP
10
0.250.3
0.200.3
120.30
120.25
OLP
10
100
OLP
10
100
0.190.3
120.20
OLP
10
100
12
OLP
0.3
3.0
5.0
1.20
2.00
6HPU10D-101
66
3.0
±5
HPU10C-102
5.0
6.0
1.33
1.60
8HPU10D-102
50
5.0
±5
1.00
1.33
60
8HPU10D-103
±5
6.0
11.0
0.90
1.25
80
10
HPU10D-104
±5
8.0
83
11.00.3
120.90
OLP
1.25
1
0.90
100
10
HPU10D-105
±5
11.0
84
13.00.3
120.76
OLP
0.90
1
0.76
100
10
HPU10D-106
±5
13.0
85
16.00.3
120.62
OLP
0.76
1
WWW.ASTRODYNETDI.COM
8.0
6.0
HPU10C-103
HPU10C-104
8.0
HPU10C-105
11.0
13.0
0.76
HPU10C-106
13.0
16.0
0.62
121.20
(
HPU10C-101
2.00
6
6.0 0.3USA: 1-800-823-8082
1.60
80
121.33 OLP
ASTRODYNE
8
65
5.0 0.2
Output Power
Adjustment Maximum
Adjustment Maximum
Adjustable
Output Current
Output CurrentTo meet these published specs:
Voltage Range
requires an Output Cord Length of 48” and 20AWG wire (Based on the output volt.)
(Based on the outputAHP1001x-01~05
volt.)
MODEL NO.
AHP1001x-06~12 requires an Output Cord Length pf 48” and 24AWG wire
+Vout
min
max
max
max
min
min
Any deviation from these requirements will change the Regulation and Efficiency of the product
(VDC)
(A)
(A)
(A)
(A)
(W)
(mVp-p)
(%)
(%) (VDC)
(W)
(ms)
Protection Mode
(VDC)
86
50
8
120.76
120.62
Hold-Up Time
-Vout
max
86
66
8
0.620.3
0.470.3
No Load
Consumption
MODEL
NO. diameter
5.5mm outer
2.1mm inner diameter, min
female
11mm length, center “+”
(VDC)
85
40.0
±3
50.0
±3
Ripple & Noise
Adjustable
Voltage Range
Maximum
Output Power
Coaxial Plug
33.0 100
27.0
±5
33.0
±5
84
(mVp-p
Rating Chart:
Rating Chart:
DC OUTPUT CONNECTIONS
10
21.0 100
16.0
±5
21.0
±5
Typ. Efficiency
33.0
HPU10B-109 10
0.47
HPU10B-110 10
0.37
HPU10B-111 10
0.30
16.0 100
Total Regulation
HPU10A-110
CAUTIO N
HPU10A-107
13.0
1. Selected output connectors and wire, please refer to Appendix.
2. HPU10C-101~105
are(VDC)
required to use AWG#20/4FT
output
(VDC)
(A)
(A)cable.
(W)
max
3. HPU10C-106~112 are required to use AWG#24/4FT output cable.
HPU10B-101
3.0(mVp-p)and efficiency
5.0
1.20(W)by modified
2.00
4. The regulation
will
be changed
output cable. 6
(A)
(W)
(%)
(%)
(ms)
CAU TIO N
(VDC)
OUTPUT CABLE RECOMMEND
:
MECHANICAL
DIMENSIONS:
)
min
max
min ( UNIT: mmmax
80
Protection Mode
(VDC)
AHP1001D
Hold-Up Time
min
No Load
Consumption
max
Typ. Efficiency
HPU10A-101
min
Ripple & Noise
MECHANICAL
DIMENSIONS:
MODEL NO.
Adjustment Maximum
Output CurrentMODEL NO.
(Based
( UNIT: mm
) on the output volt.)
Maximum
Output Power
Adjustable
AHP1001C
Voltage Range
Adjustment Maximum
Adjustable
20
30
40
50
60
70
10
Output
Current
TEMPERATURE (°C)
Voltage Range(FIG.2) TEMPERATURE DERATING CURVE
(Based on the output volt.)
0
Total Regulation
-10
Maximum
Output Power
0
Ripple & Noise
Rating Chart:
OLP
81
OLP
1.33
8.0 0.3PACIFIC:
121.00
ASTRODYNE
886-2-26983458
8
AHP1001
M edi c a l Gr a d e C las s I I 10 Wat t A dapt er
series
DERATING CURVES
dical
10A series
10W External Medical Grade Power Supply
110
ak load when the power supply starts up.
than rated load is not allowed.
condition, each output is checked to be
100
LOAD (%)
90
changing ±10% of input voltage from
y changing ±40% of measured output load
80
70
by using 20MHz bandwidth limited
d each output with a 0.47uF capacitor at
.
om the end of the last charging pulse to the
t drops down to low limit of main output at
.
ed load, and nominal line.
energy efficiency of this Series are outlined
ed "Test Method for Calculating the Energy
Interchangeable AC-DC and AC-AC Power
" which is available on the ENERGY STAR
60
50
80
100
-10
0
120
140
160
180
200
220
INPUT VOLTAGE (VAC)
(FIG.1) INPUT VOLTAGE DERATING CURVE
240
260
280
110
100
90
80
70
60
50
40
30
20
10
0
ENSIONS: ( UNIT: mm )
10
20
30
40
50
TEMPERATURE (°C)
(FIG.2) TEMPERATURE DERATING CURVE
60
70
80
OUTPUT CABLE RECOMMEND :
1. Selected output connectors and wire, please refer to Appendix.
2. HPU10A-101~105 are required to use AWG#20/4FT output cable.
3. HPU10A-106~112 are required to use AWG#24/4FT output cable.
4. The regulation and efficiency will be changed by modified output cable.
PACKING :
1. Net weight: 90g approx.
2. Optional output connectors available contact sales for details.
Protection Mode
Hold-Up Time
0315
No Load
Consumption
Typ. Efficiency
max
Total Regulation
min
Ripple & Noise
max
(Based on the output volt.)
Maximum
Output Power
Adjustment Maximum
WWW.ASTRODYNETDI.COM
Output Current
Adjustable
ltage Range
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
Similar pages