POWER DA18-M Series 18 Watts Data Sheet Total Power: 18 Watts Input Voltage: 90 - 264 Vac # of Outputs: Single Special Features Medical and ITE Safeties Switching wallmount power supply Available in interchangeable & fixed ac plug configurations US and EU interchangeable AC plugs can be inserted in multiple orientations (straight or 90°) CE Mark EMC, LVD & ErP 2011 Universal AC input Fully regulated output Overload and short circuit protection Thermal protection Energy Star and CeC compliant Efficiency level V Constant voltage High MTBF Built in EMI filter (CISPR 22 Class B) Input Input range: 90 - 264 Vac (wide range) Frequency: 47 - 63Hz Inrush current: 28 A @ 264 Vac Input current: 0.35 A rms @ 120 Vac; 0.25 A @ 240 Vac EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B Safety ground leakage current: 100 μA @ 50/60 Hz, 264 Vac input Output Safety UL cUL TUV AS/NZS CB CE Electrical Specifications 60950, 60601-1 60950, 60601-1 60950-1, 60601-1 60950-1, 60601-1 Certificate and report EMC, LVD & ErP 2011 for EU & UK versions Voltage (Vo): 12 V and 15 V versions Voltage regulation: ± 5% @ constant voltage mode Maximum Power (Po): 18 W Hold-up time: 10 ms. typical at full load @ 230 Vac Overvoltage protection: Non-latching type Overload protection: Output shortcircuit protection auto recover Overload protected @ 150% above maximum rating Overtemperature protection: Auto recovery Output cable/connector barrel polarity: DC cable with 2.5 mm x 5.5mm barrel plug, 2.1 mm x 5.5 mm available on DC multi-plug version. For others please contact factory. DC plug center +v DC plug outer -v DA18-M Series Data Sheet Environmental Specifications Operating temperature: 0 ° to +40 °C ambient Storage temperature: -40 °C to +85 °C Electromagnetic susceptibility: Designed to meet EN55024 Humidity: Operating; non-condensing 5% to 95% RH Vibration: Frequency/PSD: 5 - 350 Hz 0.0001 g2/Hz 350 - 500 Hz - 6dB/Oct. 500 Hz 0.00005 g2/Hz Acceleration: 0.21 gRMS Duration: 20 min per second AC Plug Configuration for Fixed Plug U.S. 2-prong US Europe 2-prong EU United Kingdom 3-prong UK Australia 2-prong AU AC Plug Configuration for Interchangeable Plug U.S. 2-prong DA-US Europe 2-prong DA-EU United Kingdom 3-prong DA-UK Australia 2-prong DA-AU C8 - 2 receptacle DA-C8 Japan 2-prong DA-JP China 2-prong DA-CH Korea 2-prong DA-KR DA18-M Series Data Sheet Mechanical Drawings 0.63” (16) 1.99” (50,6) 59” (1500) 1.78” (45,3) 2.65” (67,3) DA18-XXXUS-M 1.10” (28) 2.36” (60) (-) (+) CONNECTOR PIN-OUT DETAIL DA18-XXXAU-M 1.10” (28 ± 0,3) 2.36” (60) (-) (+) CONNECTOR PIN-OUT DETAIL 2.14” (54,3) 0.67” (17,1) 2.8” (71,4) 59” (1500) DA18-M Series Data Sheet Mechanical Drawings DA18-XXXEU-M 2.36” (60) 1.10” (28) 0.685” (17,4) 0.744” (18,9) 3.22” (82) 59” (1500) (-) (+) CONNECTOR PIN-OUT DETAIL DA18-XXXUK-M 1.98” (50.2) 2.36” (60) 0.893” (22,7) 1.90” (48,3) 59” (1500) (-) (+) CONNECTOR PIN-OUT DETAIL DA18-M Series Data Sheet Mechanical Drawings DA18-MP Interchangeable Plug Adapter 1.10” (28) 2.36” (60) 2.06” (52.22) 59” (1500) 1.58” (40.18) DA-UK DA-US *Can be inserted straight or 90˚ DA-JP *Can be inserted straight or 90˚ Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± .02”. 3. Weight: 0.25 lb/0.114 kg 4. Warranty: 2 years DA-AU *Can be inserted straight or 90˚ DA-CH *Can be inserted straight or 90˚ DA-EU DA-KR DA-C8 DA18-M Series Data Sheet Ordering Information - DA18 Adapter Model Number Maximum Power Output Voltage Minimum Load Maximum Load Regulation2 Ripple P/P (PARD)3 DA18-120US-M 18 W 12.0 V 0A 1.5 ± 5% 120 mV DA18-120EU-M 18 W 12.0 V 0A 1.5 ± 5% 120 mV DA18-120UK-M 18 W 12.0 V 0A 1.5 ± 5% 120 mV DA18-120AU-M 18 W 12.0 V 0A 1.5 ± 5% 120 mV DA18-120MP-M* 18 W 12.0 V 0A 1.5 ± 5% 120 mV DA18-120MP-M2.1** 18 W 12.0 V 0A 1.5 ± 5% 120 mV DA18-150US-M 18 W 15.0 V 0A 1.2 ± 5% 150 mV DA18-150EU-M 18 W 15.0 V 0A 1.2 ± 5% 150 mV DA18-150UK-M 18 W 15.0 V 0A 1.2 ± 5% 150 mV DA18-150AU-M 18 W 15.0 V 0A 1.2 ± 5% 150 mV DA18-150MP-M* 18 W 15.0 V 0A 1.2 ± 5% 150 mV DA18-150MP-M2.1** 18 W 15.0 V 0A 1.2 ± 5% 150 mV * Interchangeable version - AC Plugs must be purchased separately to be used with DA18-120MP-M and DA18-150MP-M. ** 2.1 mm x 5.5 mm barrel plug Ordering Information - DA18 Interchangeable Plug Model Number DA-US DA-C8 DA-EU DA-JP DA-UK DA-CH DA-AU DA-KR DA-All (Includes DA-US, DA-EU, DA-UK, and DA-AU) 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 mHz bandwidth and 10 μF in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 4. Power supplies will operate with no-load. WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2014 Artesyn Embedded Technologies, Inc. www.artesyn.com For more information: www.artesyn.com/power For support: [email protected] DA18-M Series-DS 06.04.14