AI3D Series FAST / TTL Buffered Triple Independent Delays Electrical Specifications at 25OC 14-Pin Package Surface Mount and Thru-hole Versions Delay Tolerance (ns) FAST/TTL Logic Buffered 14-Pin 74F/TTL Buffered Triple Independent Delays DIP P/N G-SMD P/N 3 Independent Equal Delay Lines *** Unique Delays Per Line are Available *** 5 ± 1.00 AI3D-5 AI3D-5G AI3D-6 AI3D-6G Operating Temperature Range 0OC to +70OC 6 ± 1.00 7 ± 1.00 AI3D-7 AI3D-7G 8 ± 1.00 AI3D-8 AI3D-8G 9 ± 1.00 AI3D-9 AI3D-9G 10 ± 1.50 AI3D-10 AI3D-10G 11 ± 1.50 AI3D-11 AI3D-11G 12 ± 1.50 AI3D-12 AI3D-12G 15 ± 2.00 AI3D-15 AI3D-15G 20 ± 2.00 AI3D-20 AI3D-20G 25 ± 2.00 AI3D-25 AI3D-25G 30 ± 2.00 AI3D-30 AI3D-30G 35 ± 2.00 AI3D-35 AI3D-35G 40 ± 2.00 AI3D-40 AI3D-40G 50 ± 2.50 AI3D-50 AI3D-50G 8-pin DIP/SMD Versions: FAM3D Series 14-pin Low Cost DIP: MSDM Series AI3D 14-Pin Schematic Vcc OUT 1 OUT 2 OUT 3 12 10 8 14 1 3 5 7 IN 1 IN 2 IN 3 GND TEST CONDITIONS -- FAST / TTL Dimensions in Inches (mm) VCC Supply Voltage ................................................ 5.00VDC Input Pulse Voltage ................................................... 3.20V Input Pulse Rise Time ....................................... 3.0 ns max. Input Pulse Width / Period .......................... 1000 / 2000 ns 1. Measurements made at 25OC 2. Delay Times measured at 1.50V level of leading edge. 3. Rise Times measured from 0.75V to 2.40V. 4. 10pf probe and fixture load on output under test. Commercial Grade 14-Pin Package with Unused Leads Removed as per Schematic. DIP (Default, AI3D-XX) OPERATING SPECIFICATIONS VCC Supply Voltage .......................... 5.00 ± 0.25 VDC ICC Supply Current ................. 45 mA typ, 95 mA max. Logic “1” Input: VIH ........... 2.00 V min., 5.50 V max. IIH .................. 20 µA max. @ 2.70V Logic “0” Input: VIL .............................. 0.80 V max. IIL ............................... -0.6 mA mA VOH Logic “1” Voltage Out ......................... 2.40 V min. VOL Logic “0” Voltage Out ....................... 0.50 V max. PWI Input Pulse Width .................. 100% of Delay min. Operating Temperature Range .................. 0O to 70OC Storage Temperature Range ............ -65O to +150OC P/N Description .285 (7.24) MAX. .785 (19.94) MAX. .120 (3.05) MIN. .020 (0.51) TYP. .010 (0.25) TYP. MAX. Buffered Triple Delays: 14-pin Com'l 74F / TTL .050 (1.27) TYP. .300 (7.62) .285 (7.24) G-SMD (AI3D-XXG) .020 (0.51) TYP. .008 R (0.20) .365 (9.27) MAX. .200 (5.08) TYP. .050 (1.27) TYP. .785 (19.94) MAX. AI3D - XXX X Delay Per Line in nanoseconds (ns) Lead Style: Blank = Auto-Insertable DIP G = “Gull Wing” Surface Mount J = “J” Bend Surface Mount .250 .020 (6.35) (0.51) MAX. .200 (5.08) TYP. .250 (6.35) ) X.MAX. .015 .030 (0.38) (0.76) TYP. TYP. .008 R (0.20) .010 (0.25) TYP. .430 (10.92) .400 (10.16) Examples: AI3D-20 = 20ns Triple 74F/TTL, DIP AI3D-5G = 5ns Triple 74F/TTL, G-SMD Specifications subject to change without notice. Rhombus Industries Inc. For other values & Custom Designs, contact factory. AI3D 9902 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971 www.rhombus-ind.com • email: [email protected]