FEATURES • 1.5 WATTS REGULATED OUTPUT POWER • OUTPUT CURRENT UP TO 300mA • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 55% • INPUT RANGE FROM 4.5VDC TO 5.5VDC, 10.8VDC TO 13.2VDC, AND 21.6VDC TO 26.4VDC • FIVE-SIDED EMI SHIELD • LOW OUTPUT RIPPLE & NOISE • PI TYPE INPUT FILTER • 500VDC ISOLATION VOLTAGE • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC • DESIGN MEETS UL60950-1, EN60950-1 AND IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment OPTIONS SMD TYPE DESCRIPTION The DR1P5 series offer 1.5 watts of output power from a package in an IC compatible 24 pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible to MKC03 series. DR1P5 series have input voltage of 4.5-5.5, 10.8-13.2 and 21.6-26.4VDC. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS 1.5 Watts, max. Input voltage range Output power Voltage accuracy Full load and nominal Vin ± 4% Minimum load LL to HL at Full Load ± 0.3% D05 output others Load regulation 25% to 100% FL Cross regulation Asymmetrical load 25% / 100% FL Ripple and noise 20MHz bandwidth ENVIRONMENTAL SPECIFICATIONS See table 1 Sec. +100ºC Storage temperature range Thermal impedance -55ºC ~ +105ºC Nature convection Thermal shock GENERAL SPECIFICATIONS Isolation voltage 500VDC, min. Relative humidity Isolation resistance 10 ohms, min. 9 Isolation capacitance Design meet safety standard MIL-STD-810F 5% to 95% RH EMC CHARACTERISTICS 30pF, max. EMI 20KHz, min. Switching frequency 20ºC/watt MIL-STD-810F See table Vibration Efficiency EN55022 Class A IEC60950-1, UL60950-1,EN60950-1 Case material Nickel-coated copper Base material Non-conductive black plastic MTBF (Note 1) -30ºC ~ +71ºC ± 5% Maximum case temperature Short circuit protection (Note 6) Weight Pi type ± 1.5% ± 0.5% Operating ambient temperature ±0.02% / ºC, max. Temperature coefficient Dimensions 4.5 – 5.5VDC 10.8 – 13.2VDC 21.6 – 26.4VDC 0% Input filter Line regulation Potting material 5V nominal input 12V nominal input 24V nominal input Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) DIP 16g (0.55oz) SMD 18g (0.62oz) 6 BELLCORE TR-NWT-000332 5.531 x 10 hrs 6 MIL-HDBK-217F 3.827 x 10 hrs Page 1 of 3 Issued Date：2009/03/06 Model Number DR1P5-05S05 DR1P5-05S12 DR1P5-05S15 DR1P5-05D05 DR1P5-05D12 DR1P5-05D15 DR1P5-12S05 DR1P5-12S12 DR1P5-12S15 DR1P5-12D05 DR1P5-12D12 DR1P5-12D15 DR1P5-24S05 DR1P5-24S12 DR1P5-24S15 DR1P5-24D05 DR1P5-24D12 DR1P5-24D15 Input Range 4.5 – 5.5 VDC 4.5 – 5.5 VDC 4.5 – 5.5 VDC 4.5 – 5.5 VDC 4.5 – 5.5 VDC 4.5 – 5.5 VDC 10.8 – 13.2 VDC 10.8 – 13.2 VDC 10.8 – 13.2 VDC 10.8 – 13.2 VDC 10.8 – 13.2 VDC 10.8 – 13.2 VDC 21.6 – 26.4 VDC 21.6 – 26.4 VDC 21.6 – 26.4 VDC 21.6 – 26.4 VDC 21.6 – 26.4 VDC 21.6 – 26.4 VDC Output Voltage 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output Current Input Current (4) Output Ripple & Noise Min. load Full load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 300mA 125mA 100mA 200mA/-100mA ± 60mA ± 50mA 300mA 125mA 100mA 200mA/-100mA ± 60mA ± 50mA 300mA 125mA 100mA 200mA/-100mA ± 60mA ± 50mA No load (3) 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p (4) Eff Full load (%) Capacitor Load max(5) (2) 65mA 80mA 95mA 50mA 90mA 100mA 30mA 30mA 40mA 30mA 45mA 40mA 20mA 20mA 20mA 15mA 20mA 20mA 54 52 55 48 51 54 55 52 55 49 51 54 54 52 55 48 51 54 600mA 625mA 588mA 682mA 613mA 600mA 245mA 260mA 245mA 278mA 255mA 250mA 125mA 130mA 123mA 142mA 128mA 125mA 470μF 330μF 330μF 330μF 110μF 110μF 470μF 330μF 330μF 330μF 110μF 110μF 470μF 330μF 330μF 330μF 110μF 110μF Note DR1P5-24S05 Derating Curve 12 0 10 0 80 60 40 20 0 -30 -10 10 30 50 70 71 90 110 AMBIENT T EMPERATURE(℃ ) EFFICIENCY(%) 2. 3. 4. 5. 6. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. Internal fuse is not included, so we suggest to use an input line fuse. OUTPUT POWER (%) 1. 65 60 55 50 45 40 35 30 25 20 15 DR1P5-24S05 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) Page 2 of 3 Issued Date：2009/03/06 1.00(25.4) 0.01 x 0.02 (0.25 x 0.50) 0.600(15.24) 1 1.26 (32.0) Pin Area 0.04 x 0.02 (1.0 x 0.5) 0.43(10.9) 0.15 (3.8) 0.02(0.5) 0.900 (22.86) 20 10 11 12 0.15 (3.8) 24 0.44(11.2) 5 BOTTOM VIEW 0.40 (10.2) 16 9 13 12 0.25 (6.4) 15 14 13 1 2 3 0.100 (2.54) 1.25 (31.8) 24 23 22 0.92(23.4) Rectangular Pin 0.08(2.0) 0.100 (2.54) Suffix-SMD 0.80(20.3) 0.80(20.3) 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) DIP PIN CONNECTION SMD PIN CONNECTION PIN SINGLE DUAL PIN SINGLE DUAL 1 2 3 10 11 12 + INPUT NC NC -OUTPUT +OUTPUT - INPUT + INPUT - OUTPUT COMMON COMMON +OUTPUT - INPUT 24 23 22 15 14 13 + INPUT NC NC - OUTPUT +OUTPUT - INPUT + INPUT - OUTPUT COMMON COMMON +OUTPUT - INPUT PIN SINGLE DUAL PIN SINGLE DUAL 1 + INPUT + INPUT 24 + INPUT + INPUT 2 NC - OUTPUT 23 NC - OUTPUT 3 NC COMMON 22 NC COMMON 10 -OUTPUT COMMON 15 -OUTPUT COMMON 11 +OUTPUT +OUTPUT 14 +OUTPUT +OUTPUT 12 - INPUT - INPUT 13 - INPUT - INPUT Others NC NC Others NC NC Page 3 of 3 Issued Date：2009/03/06