Optical Transport Solutions Datasheet FD SFP-to-SFP Media Module Features and Benefits SFP-to-SFP interface connectivity Data rate independence Transparent protocol determined by SFPs Flexibility and scalability - Add/Change optics - Adjust data rates as needed - Maintain single item inventory Complete range of optical and copper plug-in interfaces available from MRV Communications 2R data signal conditioning SFP Digital Diagnostics (SFF-8472) Overview SNMP management Combining data rate independent connectivity with support for SFP transceivers, the Fiber Driver® SFP-to-SFP media module (EM316-2SFP) from MRV Communications defines a new generation of deployment flexibility and inventory management. It is now simple to deploy an extremely wide range of optical infrastructure solutions including media conversion, signal boosting, lambda conversion, Wave Division Multiplexing (WDM), and Optical Add/Drop Multiplexing (OADM). Full graphical management support in MegaVision Pro® Applications Media conversion Signal boosting Lambda conversion The SFP-to-SFP media module offers plug-n-play ease of installation. Simply install the module into the Fiber Driver chassis, insert the SFP transceivers required for the protocol and distance of the application, and connect to the network. Changing the connection type later requires changing only the transceivers. With SFP and module hot-swapping, there is virtually no down time involved. CWDM DWDM OADM Typical Application: Multi-mode to Single-mode Conversion 3- K M -- -- 3WITCH2OUTER %- 3&0 WITH -ANAGEMENT -ODULE IN A 3LOT #HASSIS 3WITCH2OUTER [email protected] Optical Transport Solutions Because SFP transceivers are portable, they may be shared easily between different locations and applications. Modular design maximizes equipment investment and reduces the need for on-hand inventory. MRV Communications provides a complete range of optical and copper plug-in interfaces for the EM316-2SFP to satisfy your network growth and changing needs. The SFP-to-SFP media module is data rate independent and performs 2R (reshape and retransmit) conditioning of the data signal. Any protocol is supported, including Fast and Gigabit Ethernet, FDDI, ESCON, SONET (OC-3, OC12, OC-48 and above), Fibre Channel (1 Gbps & 2 Gbps), DVB, Serial Digital Video Interface (SDI) SMPTPE-259M (270Mbps), High Definition Serial Interface (HD-SDI/HDTV) SMTPE-292M (1.5 Gbps), and many others. The SFP pair selected determines the protocol. The SFP-to-SFP media module fully supports the SFP standard including Digital Diagnostics as defined by SFF8472. Together with a Fiber Deriver network management module, it provides real-time access to information such as transceiver type (protocol, range, vendor, etc.), transceiver temperature, TX/RX optical power, and transceiver supply voltage. It also provides a means for generating management alerts and warnings when system parameters fall outside of the normal operating range. With an external Mux/DeMux unit such as the 4-channel or 8-channel Fiber Driver CWDM Passive Mux/DeMux (EM316PA4N / EM316PA8N), the SFP-to-SFP media module becomes a WDM building block for any protocol and data rate of the SFPs. MRV also offers Dense Wave Division Multiplexing (DWDM) options. Deployed along a WDM trunk at customer service points with MRV Communications passive OADM technology, the SFP-to-SFP media module becomes a sophisticated Add/ Drop topology component. The SFP-to-SFP media module is a hot-swappable, single-slot device that fits in any powered Fiber Driver chassis. Through a Fiber Driver network management module, the EM3162SFP is SNMP manageable and fully supported through the GUI of MegaVision Pro®, the comprehensive network management system (NMS) from MRV Communications. Contact your MRV Communications representative for additional information on the full line of MRV Communications products, pricing, and availability. Physical Specifications Operating Temperature Range* 00C to 500C (320F to 1580F) Storage Temperature -400C to 700C (-400F to 1580F) Relative Humidity 85% maximum, non-condensing Physical Dimensions 25 mm x 75 mm x 175 mm deep (1” x 3” x 7” deep) Weight Approximately 213 g (7.5 oz) Regulatory Compliance FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity; RoHS Directive; China RoHS; WEEE Directive Ordering Info * Operating Range listed is for the module only. Operating Range of pluggable interface(s) used may differ. Model Description Protocol Connectors Wavelength EM316-2SFP Protocol independent media module with SFP Interfaces Data rate independent, SFP (x2) protocol transparent N/A (SFP dependent) Budget (dB) Range N/A (SFP dependent) N/A (SFP dependent) MRV has more than 50 offices throughout the world. Addresses, phone numbers, and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV (East Coast USA) 295 Foster St. Littleton, MA 01460 800-338-5316 978-952-4700 MRV (West Coast USA) 20415 Nordhoff St. Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV (International) Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax. (49) 6105/207-100 All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-FD-2SFP-041907 1398021-001 Rev. A1 Copyright ©2007 MRV Communications, Inc. All Rights Reserved.