Delta AB40S Ac/dc power module 40w, industrial & medical safety Datasheet

AB40S/D Series
AC/DC Power Module 40W, Industrial & Medical Safety
FEATURES


Fully encapsulated Plastic Case
3 Mounting Versions:
- PCB Mounting with Solder Pins
- Chassis Mounting with Screw Terminals
- DIN-Rail Mounting

Package Dimension 88.9x63.5x30.0 mm (PCB
Mounting Version)

Universal Input 85-264VAC, 47-440 Hz

Protection Class ll

Extended Operating Temp.Range -40°C to +60°C
at full Load


LED Output Indicator (Chassis Version Models)
Industrial Safety to UL/cUL/IEC/EN 60950-1 and
UL508

Medical Safety Approval to UL/cUL/IEC/EN
60601-1 3rd Edition

Over Load and Over Temperature Protection

3 Year Product Warranty
The AB40S/D series is a range of fully encapsulated AC/DC power modules. These high performance products feature an extended
operating temperature range of -40°C to +80°C. Universal input voltage 85-264VAC and UL/IEC/EN safety approvals including
medical safety and UL508 listing qualify these power supplies modules for applications in products with worldwide
markets.EMI-filter meets EN55022, class B and FCC,part15, class B.
The AB40S/D series power modules provide an economical solution for many space critical applications in commercial, medical and
industrial electronic equipment.
Model Selection Guide
Model Number PCB
Mounting
Output
Voltage
Output Current
Input Current
Max.
115VAC, 60Hz
230VAC, 50Hz
@Max. Load
VDC
mA
mA(typ.)
AB40S0500A
5
8000
716
AB40S1200A
12
3330
AB40S1500A
15
2660
AB40S2400A
24
AB40D1212A
AB40D1515A
Max. capacitive
Load
Efficiency
(typ.)
@Max. Load, 115VAC
μF
%
429
8000
81
689
414
3900
84
680
408
3900
85
1660
687
413
680
84
±12
±1660
687
413
1500#
84
±15
±1330
680
408
1000#
85
# For each output
DS_AB40S/D_06112014
E-mail: [email protected]
http://www.deltaww.com/dcdc
P1
Input Specifications
Parameter
Model
AC Voltage Input Range
Input Frequency Range
Max.
Unit
---
264
VAC
47
---
440
Hz
---
370
VDC
---
---
0.3
W
115VAC
---
---
30
A
230VAC
---
---
60
A
No-Load Power Consumption
Inrush Current (Cold Start at 25℃)
Typ.
85
120
All Models
DC Voltage Input Range
Min.
Output Specifications
Parameter
Conditions
Output Voltage Accuracy
Line Regulation
Min.
Typ.
--±2.0
--±0.5
Single Output Model
--±1.0
Dual Output Models
--±2.0
No minimum Load Requirement
0-20 MHz
5VDC Output Models
1.5
--Ban
dwi Other Output Models
1.0
--dth
Zener diode clamp
120
----±0.02
----85VAC, Hiccup Mode, auto-recovery
105
--(long term overload condition may cause
damage)
Hiccup mode, indefinite (automatic recovery)
Load Regulation
Min.Load
Ripple & Noise
Over Voltage Protection
Temperature Coefficient
Overshoot
Current Limitation
Short Circuit Protection
Max.
Unit
---------
%
%
%
%
1.8
%VPP of Vo
1.3
%VPP of Vo
----5
% of Vo
%/℃
%
---
% Inom.
General Specifications
Parameter
I/O Isolation Voltage (reinforced)
Leakage Current
I/O Isolation Resistance
Switching Frequency
Hold-up Time
MTBF (calculated)
Conditions
500 VDC
115VAC, 60Hz
230VAC, 50Hz
MIL-HDBK-217F@25℃, Ground
Benign
Protection Class II
Min.
Typ.
Max.
Unit
4000
--1000
-------
--80
--130
25
80
-------------
VACrms
μA
MΩ
KHz
ms
ms
200,000
---
---
Hours
According IEC/EN 60536
IEC/EN 60950-1, 60601-1 3rd, 2XMOPP
cUL/UL 60950-1, 60601-1 3rd, 2XMOPP, UL 508 listed
Safety Approvals
EMC Specifications
Parameter
Conducted and radiated EMI
ESD
Radiated immunity
Fast transient
Surge
Conducted immunity
PFMF
Dips
Interruptions
DS_AB40S/D_06112014
Standards & Level
Performance
EN55011, EN55022, FCC part 15
EN61000-4-2 air ± 8kV , Contact ± 4kV
EN61000-4-3 10V/m
EN61000-4-4 ±2kV
EN61000-4-5 ±1kV
EN61000-4-6 10Vrms
EN61000-4-8 30A/m
EN61000-4-11 30% 10ms
EN61000-4-11 >95% 5000ms
Class B
A
A
A
A
A
A
A
B
E-mail: [email protected]
http://www.deltaww.com/dcdc
P2
Environmental Specifications
Parameter
Conditions
Min.
Ambient
Above +60℃
-40℃
Max.
+80℃
1.5W / ℃
-40℃
+95℃
Shutdown at 90℃ (automatic recovery at approx. 67℃)
--95% rel. H
Free-Air convection
Temperature Range (operational)
Power Derating
Storage Temperature Range
Over Temperature Protection
Humidity (non condensing)
Cooling
Notes
1
2
3
4
5
6
7
8
9
10
This product is not designed for use in critical life support systems, equipment used in hazardous environment, nuclear control
systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet.
Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage, after warm-up time rated output current unless
otherwise noted.
Ripple & Noise measured with a 0.1μF/50V MLCC and a 1μF/50V Aluminum electrolytic.
Safety approvals cover frequency 47-63 Hz.
We recommend to protect the converter by a slow blow fuse in the input supply line.
Other input and output voltage may be available, please contact factory.
To order the module with chassis mount package, please add a suffix C (e.g. AB40S2400C ).
To order the module in chassis mount with DIN-Rail kit, please add a suffix D (e.g. AB40S2400D).
That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
Specifications are subject to change without notice.
Package Specifications PCB Mounting
Mechanical Dimensions
6
15.9 [0.63]
15.24
[0.60]
12.7
[0.50]
5
4
0.7
[0.03]
3
81.3 [3.20]
31.6 [1.24]
88.9 [3.50]
7
12.7
[0.50]
1.0
[ 0.04]
15.24
[0.60]
30.0
[1.18]
6.0
[0.24]
Pin Connections
Pi
Single Output
n
1
AC (N)
AC (N)
2
AC (L)
AC (L)
3
+Vout
+Vout
4
No Pin
No Pin
5
-Vout
Common
6
No Pin
No Pin
7
NC
-Vout
NC: No Connection
Bottom View
1
5.0
[0.20]
Mounting M4.0 Thread
2
Dual Output
►All
dimensions in mm (inches)
55.88 [2.20]
►Tolerance:
63.5 [2.50]
►Pin
±0.5 (±0.02)
diameter  1.0 ±0.1
(0.04±0.004)
Physical Characteristics
Case Size
:
88.9x63.5x30.0mm (3.50x2.50x1.18 inches)
Case Material
:
Plastic resin (flammability to UL 94V-0 rated)
Pin Material
:
Copper Alloy with Gold Plate Over Nickel Subplate
Weight
:
310g
DS_AB40S/D_06112014
E-mail: [email protected]
http://www.deltaww.com/dcdc
P3
Package Specifications Chassis Mounting (order code suffix C)
Mechanical Dimensions
Connections
Pi
Single Output
n
Indication LED
2
Top view
1
63.8 [2.51]
7
6
5
4
3
50.0 [1.97]
4 x 3.5
DCON
POWER "GOOD" INDICATOR
100.0 [3.94]
Dual Output
1
AC (N)
AC (N)
2
AC (L)
AC (L)
3
+Vout
+Vout
4
NC
NC
5
-Vout
Common
6
NC
NC
7
NC
-Vout
112.0 [4.41]
NC: No Connection
92.0 [3.62]
16.8 [0.66]
5.0 [0.20]
34.1 [1.34]
10.0 [0.39]
►All
dimensions in mm (inches)
►Tolerance:
±0.5 (±0.02)
Physical Characteristics
Case Size
:
112.0x63.8x34.1mm (4.41x2.51x1.34 inches)
Case Material
:
Plastic resin (flammability to UL 94V-0 rated)
Weight
:
320g
Package Specifications with DIN Rail Mounting Bracket (order code suffix D)
Mechanical Dimensions
7
6
5
4
3
Indication LED
Top view
2
1
63.8 [2.51]
3.5
50.0 [1.97]
4x
DCON
POWER "GOOD" INDICATOR
100.0 [3.94]
112.0 [4.41]
DS_AB40S/D_06112014
34.1 [1.34]
11.0 [0.43]
3.0 [0.12]
5.0
[0.20]
10.0 [0.39]
16.8 [0.66]
92.0 [3.62]
E-mail: [email protected]
http://www.deltaww.com/dcdc
P4
Physical Characteristics
Case Size
:
112.0x63.8x34.1mm (4.41x2.51x1.34 inches)
Case Material
:
Plastic resin (flammability to UL 94V-0 rated)
Weight
:
374g
DIN-Rail Mounting Bracket
Part Numbering System
A
B
40
S
05
00
A
Product type
Family series
Watt
Number of
Outputs
Output
Voltage I
Output
Voltage II
Option Code
AC/DC Power Module
Medical
application
40 - 40W
S - Single
05 - 5V
D - Dual
12 - 12V
15 - 15V
24 - 24V
00 - not
applicable
12 - 12V
15 - 15V
A - PCB Mount
C - Chassis Mount
D - Din Rail Mount
CONTACT: www.deltaww.com/dcdc
USA:
Telephone:
East Coast: 978-656-3993
West Coast: 510-668-5100
Fax: (978) 656 3964
Email: [email protected]
Europe:
Phone: +31-20-655-0967
Fax: +31-20-655-0999
Email: [email protected]
Asia & the rest of world:
Telephone: +886 3 4526107
ext 6220~6224
Fax: +886 3 4513485
Email: [email protected]
WARRANTY
Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request
from Delta.
Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor
for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice
DS_AB40S/D_06112014
E-mail: [email protected]
http://www.deltaww.com/dcdc
P5
Similar pages