ARC3 High Voltage Precision Resistors Designed for applications such as voltage dividers, medical and measuring equipment, electrostatic and current limiting devices where high stability, low TCR and high ohmic values are required. • Non Inductive, Thick Film • High Voltage to 96 kVdc • Low TCR • Tolerance as low as ± 0.1% • RoHS Compliant Characteristics Operating temperature: -55°C to +225°C Tolerance (Code): ± 0.1% (B), ± 0.25% (C), ± 0.5% (D), ± 1% (F), ± 2% (G), ± 5% (J), ± 10% (K) Temperature Coefficient (Code): ± 15ppm/°C (A), ± 25ppm/°C (E), ± 50ppm/°C (F), ± 100ppm/°C (S), ± 200ppm/°C (L) TCR stated is measure at +25˚C and +85˚C. For TCR outside this range, please contact ARCOL Insulation resistance: > 10,000Mohm 500 Volts @ 25°C, 75% relative humidity Dielectric strength: > 1000 Volt 25°C, 75% relative humidity Thermal shock: R/R 0.25% max Overload: R/R 0.25% max Moisture resistance: R/R 0.25% max Load life: R/R 0.5% max 1.5 x Pnom, 5 sec (do not exceed 1.5 x V max) 1000 hours at rated load These resistors are tailored for operation in air and not aggresive atmospheres. For special applications (i.e. oil, casting, moulding, etc) please contact ARCOL. Electrical Specifications Electrical data Type P Watt 40°C Resistance range available at Tolerance / TCR U kV dc ± 0.1-10% 15 ppm/°C ± 0.1-10% 25 ppm/°C ± 0.5 - 10% 50 ppm/°C ± 0.5 - 10% 100 ppm/°C ± 2 - 10% 150 ppm/°C ± 2 - 10% 200 ppm/°C ARC3-11 11 24 50K-500M 50K-500M 500R-1G 500R-1G 500R-5G 500R-5G ARC3-23 23 48 100K-1G 100K-1G 700R-1G 700R-1G 700R-10G 700R-10G ARC3-54 54 48 100K-1G 100K-1G 2R-1G 2R-1G 2R-10G 2R-10G ARC3-71 71 64 100K-1G5 100K-1G5 20R-1G5 20R-1G5 20R-15G 20R-15G ARC3-105 105 96 150K-2G 150K-2G 80R-2G 80R-2G 80R-25G 80R-25G F +44 (0) 1872 222002 E [email protected] For more information and ordering, please consult www.arcolresistors.com www.arcolresistors.com Page 1 of 2 5/11-39 ARC3 High Voltage Precision Resistors Ordering Procedure Derating Curve Standard Resistor To specify standard: Series, Termination 100 Percent Rated Power Style, Coating Type, Ohmic Value, Tolerance Code and Temperature Coefficient Code, e.g.: ARC3-23 20M D E Tolerance (Code) ±0.1% (B), ±0.25% (C), ±0.5% (D), ±1% (F), ±2% (G), ±5% (J), ±10% (K) Temperature Coefficient (Code) ±15ppm/°C (A), ±25ppm/°C 80 60 40 20 0 0 (E), ±50ppm/°C (F), ±100ppm/°C (S), ±200ppm/°C (L) 40 225 100 Temperature °C Dimensions (mm) G L C D B Type L B C D G ARC3-11 81 ± 1 14.5 ± 0.2 13.5 ± 0.5 10.0 ± 0.2 M4 ARC3-23 156 ± 2 14.5 ± 0.2 13.5 ± 0.5 10.0 ± 0.2 M4 ARC3-54 160 ± 2 31.5 ± 0.2 30.5 ± 0.5 18.0 ± 0.2 M8 210 ± 2.5 31.5 ± 0.2 30.5 ± 0.5 18.0 ± 0.2 M8 ARC3-105 308 ± 3.5 31.5 ± 0.2 30.5 ± 0.5 18.0 ± 0.2 M8 ARC3-71 Page 2 of 2 5/11-39