ADC300 SERIES 2W, Miniature SIP, Single & Dual Output DC/DC Converters Selection Guide Model Number The ADC300 series is an excellent selection for a variety of applications including distributed power systems, mixed analog/digital subsystems, portable test equipments, local power networks and battery backed systems. Output Current mA 500 400 165 133 ±200 ±83 ±66 500 400 165 133 ±200 ±83 ±66 500 400 165 133 ±200 ±83 ±66 19.5 [0.77] 2.54 [0.100] 2.3 [0.09] 2 4 5 6 0.50 [0.020] % Typ. 73 76 80 80 77 79 79 74 78 82 83 79 82 82 74 77 81 82 79 81 82 Load Regulation % Max. 11 11 7 7 10 7 7 8 8 5 5 8 5 5 8 8 5 5 8 5 5 Pin Singles Duals 1 2 4 5 6 +Vin -Vin -Vout No Pin +Vout +Vin -Vin -Vout Common +Vout Case Size – 19.5x7.6x10.2mm (0.77x0.30x0.40inch) 18.5 [0.73] 1 Efficiency Pin Connections 7.6 [0.30] The series consists of 21 models with input voltages of 5V, 12V and 24VDC which offers standard output voltages of 3.3V, 5V, 12V, 15V, ±5V, ±12V and ±15VDC for a wide choice. Mechanical Dimensions 10.2 [0.40] MPS Industries ADC300 DC/DC's are specially designed to provide higher power to 2W in a miniature SIP package. 24 (21.6 – 26.4) 3.2 [0.13] • • • 12 (10.8 – 13.2) 1.3 [0.05] • Efficiency up to 83% 1000VDC Isolation MTBF > 2,000,000 Hours Low Cost Input 5, 12 and 24VDC Output 3.3, 5, 12, 15, ±5, ±12 and ±15VDC Temperature Performance -40°C to +85°C UL 94V-0 Package Material Internal SMD Construction Industry Standard Pinout 5 (4.5 – 5.5) 0.5 [0.02] • • • • • • ADC301 ADC302 ADC303 ADC304 ADC305 ADC306 ADC307 ADC311 ADC312 ADC313 ADC314 ADC315 ADC316 ADC317 ADC321 ADC322 ADC323 ADC324 ADC325 ADC326 ADC327 Output Voltage VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 0.25 [0.010] Key Features Input Voltage VDC Case Material – Non-Conductive Black Plastic Weight – 2.7g (0.10Oz) Tolerance Millimeters X.X±0.25 X.XX±0.13 Inches X.XX±0.01 X.XXX±0.005 Pin ±0.05 ±0.002 2463 208th Street, Ste. 205 Tel: (310) 533-1455 http://www.mpsind.com Torrance, CA 90501 Fax: (310) 533-1853 E-mail: [email protected] ADC300 SERIES 2W, Miniature SIP, Single & Dual Output DC/DC Converters Absolute Maximum Ratings Parameter General Characteristics Min. Max. Units 5VDC Input Models -0.7 9 VDC Input Surge Voltage 12VDC Input Models (1000mS) -0.7 18 VDC 24VDC Input Models -0.7 30 VDC Lead Temperature (1.5mm from case for 10sec.) --- 260 °C Internal Power Dissipation --- 650 mW Parameter Isolation Voltage Isolation Resistance Isolation Capacitance Conditions Min. Typ. Max. Units 60 Seconds 1000 --- --- VDC 500VDC 1000 --- --- MΩ 100kHz, 1V --- 80 120 pF 50 80 100 kHz 2 --- --- MHrs Min. Typ. Max. Units --- ±1.2 ±1.5 % Switching Frequency MIL-HDBK-217F @25°C Ground Benign Exceeding the unit absolute maximum ratings could cause damage. These are not continuous operating ratings. MTBF Environmental Characteristics Output Characteristics Parameter Conditions Min. Ambient -40 85 °C Line Regulation Case -40 90 °C Load Regulation -40 125 °C Ripple & Noise --95 Free-Air Convection % Short Circuit Operating Temperature Operating Temperature Storage Temperature Humidity Cooling Max. Units Parameter Conditions For Vin Change of 1% See Selection Guide Io = 20% to 100% 20MHz BW --- 100 150 % mV P-P 0.5 Second Max. Maximum Capacitive Load Models by Output Voltage (Each Output on Duals) Derating Curve 400LFM 100LFM Output Power (%) 200LFM 60 Natural convection 40 20 0 ¡ã -40 50 Duals Units 470 390 uF Notes: 100 80 Singles 60 70 80 Ambient Temperature 90 ] 100 110 1. Specifications typical at Ta=+25°C, resistive load, nominal input voltage, rated output current unless otherwise noted. 2. These power converters require a minimum output load to maintain specified regulation. 3. Operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed. 4. All DC/DC converters should be externally fused at the front end for protection. 5. Other input and output voltage may be available, please contact factory. 6. All specifications subject to change without notice. 7. For detailed data sheet, please contact us. 2463 208th Street, Ste. 205 Tel: (310) 533-1455 http://www.mpsind.com Torrance, CA 90501 Fax: (310) 533-1853 E-mail: [email protected]