DA(UL) Series UL Approved *, Normally Open, High Voltage Relays - 10kV 10kV Isolation Low Contact Resistance PCB or Panel Mount HV connections via Flying Leads, Solder Turret (wire wrap), or 1/4” Spade Terminals Excellent AC characteristics Contact Specification Unit Contact Type Contact Material Isolation across contacts kV Switching Power Max. W Switching Voltage Max. V Switching Current Max. A Carry Current Max A Capacitance across pF contacts Lifetime operations Recently approved by UL, very high isolation voltages (up to 10kV) are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications, such as cardiac defibrillators, test equipment and high voltage power supplies. The Rhodium contact relays have low contact resistance, while the Tungsten contact relays can switch higher voltages. PCB or Panel Mount, via Nylon studs, versions are available. Connection options, for the HV, include PCB, solder turret(wire wrap), flying lead and 0.25” spade terminals. Contact Resistance Insulation Resistance Coil Specification Must Operate Voltage Must Release Voltage Operate Time Release Time Resistance Relay Specification DC or AC peak DC or AC peak DC or AC peak DC or AC peak coil to screen grounded dry switching 50W switching mW max (typical) Wmin (typical) V V ms ms W DC DC diode fitted diode fitted Isolation contact/coil kV Insulation resistance contact to all terminals Wmin (typical) Environmental Operating Temp range ºC 10kV SPNO N/O (normally open) Rhodium Tungsten 10 10 50 50 1000 7000 3 2 3 4 3 4 <0.2 <0.2 10kV SPNC N/O (normally open) Rhodium Tungsten 10 10 50 50 1000 7000 2 3 <0.2 <0.2 109 109 6 10 106 50 (15) 250(100) 1010 (1013) 5V 12V 24V 109 106 50 (15) 1010 5V 3.7 0.5 3.0 2.0 28 9 1.25 3.0 2.0 150 20 4 3.0 2.0 780 3.7 0.5 2.0 3.0 38 17 10 109 106 250(100) (1013) 12V 24V 9 1.25 2.0 3.0 240 20 4 2.0 3.0 925 17 13 10 13 10 (10 ) 10 (10 ) -20 to +70 -20 to +70 *Consult factory for UL ratings Part Numbering System D A T 7 12 10 F U Reed Switch Size Contact Form A=n/o Contact Material R=Rhodium, T=Tungsten Moulding Ref. No. Coil Voltage 05=5Vdc, 12=12Vdc, 24=24Vdc Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Condition Isolation between Contacts 10=10kV “U” indicates UL approved Mounting or Connection Style No suffix indicates PCB mount F=PCB mount & coil connection with Flying lead HV connection P=Panel mount with wire wrap terminals S=PCB mount & coil connection with stud fixing & 1/4” spade HV connection T=PCB mount & coil connection with stud fixing & wire wrap HV connection Email:[email protected] ISO9001 C E R T I F I E D www.cynergy3.com DA(UL) 2016 © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. MECHANICAL PANEL MOUNT STANDARD (e.g. DAT71210U) 15.8 (0.62") 60.0 (2.36") CIRCUIT DIAGRAMS (ALL VARIANTS) (e.g. DAT71210PU) 1 18.5 (0.73") 4.0 (0.15") 4 Pins 0.635(0.025”) Square 5.1 (0.2") 3 10.2 2 1 4 (0.4") 25.4 (1.0") 50.8 (2.0") FORM A (NO) 2 4 6.3 (0.25") NOTE: COIL POLARITY IS NOT SIGNIFICNAT 9.5 (0.37") 25.4 (1.0") 50.8 (2.0") 2 Mounting Studs M4 Complete with Nuts, Nylon 66 10.0 (0.39") TURRET (Wire Wrap) (e.g. DAT71210FU) Cable: UL3239, 22AWG, 20kV, Nom. 3.2mm OD (White) ~300 50.8 (2.0") 1 2 3 1 FLYING LEAD 13.0 4 3 (e.g. DAT71210TU) 2 6.3 (0.25") 4 Pins 0.635(0.025”) Square 1 50.8 (2.0") 2 4 Pins 0.635(0.025”) Square 3 3 4 4 NOTE: PINS WHICH ARE NOT NUMBERED HAVE NO ELECTRICAL CONNECTION. NOTE: PINS WHICH ARE NOT NUMBERED HAVE NO ELECTRICAL CONNECTION. SPADE TYPE 'S' Suffix denotes the 0.250" 'Push On' blade connectors, M4 fixing bolts and Epoxy potting. (e.g. DAT71210SU) 15.8 2 1 60.0 48.00 11.60 11.0 18.5 30.0 max + 50.80 25.40 Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] 10.16 5.08 3 4 4.0 - 1 9.00+-1 2 Pins 0.635(0.025”) Square 2 Mounting Studs M4 complete with nuts, Nylon 66. Requires 2x holes minimum 4.0mm. www.cynergy3.com ISO9001C E R T I F I E D © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.