Light Touch Switches/EVQ2 5N Type 2R Light Touch Switches Type: EVQ2 ■ Features ● Wealth of product types: With or without a ground terminal, vertical type, snap-in terminals, etc. ● Can be automatically dip-soldered: Integral molding of the terminals and main body prevents the escape of flux. ■ Recommended Applications ● Operating switches for electronic equipment ■ Explanation of Part Numbers 1 2 3 4 E V Q 2 Product Code 5 6 7 8 9 Height Type Push Plate Color ■ Product Chart Operating Force 1.0 N 쑗=Standard Positioning Pin Without positioning pin 1.3 N Without positioning pin 1.6 N Without positioning pin 2.6 N Without positioning pin Height Ground Terminal 4.3 mm 5.0 mm 7.0 mm 9.5 mm With ground terminal 쑗 쑗 쑗 쑗 Without ground terminal 쑗 쑗 쑗 쑗 With ground terminal 쑗 쑗 쑗 쑗 Without ground terminal 쑗 쑗 쑗 쑗 With ground terminal 쑗 쑗 쑗 쑗 Without ground terminal 쑗 쑗 쑗 쑗 With ground terminal 쑗 쑗 쑗 쑗 Without ground terminal 쑗 쑗 쑗 쑗 ■ Specifications Type Snap action/Push-on type SPST A B A' B' Circuit Diagram Rating Electrical 10 µA 2 Vdc to 20 mA 15 Vdc (Resistiv load) Contact Resistance 50 m액 max. Insulation Resistance 50 M액 min. (at 100 Vdc) Dielectric Withstanding Voltage 250 Vac for 1 minute 3 ms max. (ON) 8 ms max. (OFF) Bouncing Mechanical 1.0 N±0.4 N 1.3 N±0.4 N 2.6 N±0.6 N 1.6 N±0.5 N 0.25 mm±0.10 mm Operating Force Travel Endurance Operating Life 100000 cycles min.✽ Operating Temperature 50000 cycles min. –20 °C to +70 °C –40 °C to +85 °C (Bulk) –20 °C to +40 °C (Taping) Storage Temperature Minimum Quantity/ Packing Unit Top-push Quantity/Carton Top-push 1000 pcs. Radial Taping (Reel Pack) 10000 pcs. ✽ 1 million cycles also available, consult our salesmen. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES124 – 00 Sep. 2010 Light Touch Switches/EVQ2 ■ Dimensions in mm (not to scale) EVQ2 With ground terminal 2-terminals type Without ground terminal 1.3 max. Q E-E' Section 0.8 0.6 18.0 –0 +1.0 B φ3.6 +0.8 5.0 –0.2 Adhesive tape E E' B +1.0 A 0.3 max. Adhesive tape shall not extend beyond base paper. A 0.5 3.85±0.70 H 3.4 0.9 0.5 max. 0.3 Circuit diagram φ4.0±0.3 6.35±0.70 5.0 9.0±0.5 P 6.0±0.3 1.3 max. 12.7±1.0 1.0 max. 18.0 –0.5 1.0 max. 2.0 max. 6.0±0.5 6.0±0.3 0.6±0.3 1.5 max. The direction of P or Q side is randomly settled. 12.7±0.3 JIS C0806-2 shall be applied to the items not specified here. 2-φ1.00±0.05 PWB mounting hole for reference (Pitch tolerance: ±0.1) View from mounting side Part Numbers Operating Force H=Height Push Plate Color Operating Life EVQ21304M 1.0 N 4.3 mm White 100000 cycles EVQ21305R 1.0 N 5.0 mm Red 100000 cycles EVQ21307K 1.0 N 7.0 mm Black 100000 cycles EVQ21309K 1.0 N 9.5 mm Black 100000 cycles EVQ21404M 1.3 N 4.3 mm White 100000 cycles EVQ21405R 1.3 N 5.0 mm Red 100000 cycles EVQ21407K 1.3 N 7.0 mm Black 100000 cycles EVQ21409K 1.3 N 9.5 mm Black 100000 cycles EVQ21504M 1.6 N 4.3 mm White 100000 cycles EVQ21505R 1.6 N 5.0 mm Red 100000 cycles EVQ21507K 1.6 N 7.0 mm Black 100000 cycles EVQ21509K 1.6 N 9.5 mm Black 100000 cycles EVQ22704M 2.6 N 4.3 mm White 50000 cycles EVQ22705R 2.6 N 5.0 mm Red 50000 cycles EVQ22707K 2.6 N 7.0 mm Black 50000 cycles EVQ22709K 2.6 N 9.5 mm Black 50000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES125 – 00 Sep. 2010