Murata DNT900DK 900 mhz fhss transceiver module with i/o development kit Datasheet

Development Kit User’s Guide
(Click here)
DNT900DK
General Overview
The DNT900 Development Kit is available as part number: DNT900DK
The DNT900 FHSS transceiver module is a low cost, high-power solution for point-to- I/O point
and point-to-multipoint wireless systems in the 900 MHz ISM band. The RF output power of the
DNT900 can be set from 1 mW to 1 W, and the RF data rate can be set from 38.4 to 500 kb/s. The
DNT900 receiver includes a low-noise preamplifier protected by two SAW filters, providing an
excellent combination of receiver sensitivity and out-ofband interference rejection. The DNT900
module includes analog, digital and serial I/O, providing the flexibility and versatility to serve
applications ranging from cable replacements to sensor networks. The DNT900 transceiver
module is easy to integrate and provides robust wireless communications up to 40 miles in lineof-sight installations.
900 MHz
FHSS Transceiver
Module with I/O
Development Kit
Kit Includes:
•
•
•
•
•
Two DNT900P radios installed in DNT900 interface boards (labeled Base and Remote)
Two 2 dBi dipole antennas with two U.FL coaxial jumper cables
Two 9 V wall-plug power suppliers, 120/240 VAC, plus two 9 V batteries (not shown above)
Two RJ-45/DB-9F cable assemblies, one RJ-11/DB-9F cable assembly, two A/B USB cables
One DNT900DK documentation and software CD
Items Needed:
• One PC with Microsoft Windows XP or Vista Operating System. The PC must be equipped with
a USB port or a serial port capable of operation at 9.6 kb/s.
Key Features:
•
•
•
•
•
•
•
•
•
900 MHz Frequency Hopping Spread Spectrum Transceiver
Point-to-Point and Point-to-Multipoint Network Topologies
Transmitter Power Configurable from 1 mW to 1 W
RF Data Rate Configurable from 38.4 to 500 kbps
Serial Port Rate up to 460.8 kbps for Streaming Applications
128-Bit AES Encryption
Separate Serial Port for Diagnostics
Analog and Digital I/O for Sensor Applications
FCC and Canadian IC Certified for Unlicensed Operation
www.RFM.com
E-mail: [email protected]
©2009 by RF Monolithics, Inc.
Page 1 of 1
DNT900DK - 1/5/09
Similar pages