DJ (ADJ) VDE 1-pole/2-pole 16A polarized power relays DJ RELAYS (ADJ) FEATURES Without a test button With a test button RoHS compliant 1. Variety of contact arrangements Wide lineup of 1 Form C, 1 Form A, 1 Form B, 2 Form C, 2 Form A, 2 Form B, 1 Form A 1 Form B. 2. Latching operation Latching via a polarized magnetic circuit structure allows remote operation and lower energy consumption 3. Compact with high capacity 16A (1-pole type) contact rating in a compact 29×13×16.5 mm (L×W×H) size. 4. Low power consumption 1 coil latching: 150mW 2 coil latching, single side stable: 250mW 5. High insulation Both clearance and creepage distance between coil and contact are at 8 mm min. 6. With operation verification function A test button (manual lever) type to facilitate circuit checks is also available (1 Form C, 1 Form A, 1 Form B types only). TYPICAL APPLICATIONS 1. FA equipment (brake circuits of industrial machine and robots, etc.) 2. Electric power devices (remote surveillance devices, etc.) 3. Household appliance networks (Motor control and lighting control, etc.) 4. Time switches ORDERING INFORMATION ADJ Contact arrangement 1: 1 Form C 2: 1 Form A 3: 1 Form B 4: 1 Form A 1 Form B 5: 2 Form C 6: 2 Form A 7: 2 Form B Operating function and protective construction 1: 1 coil latching, Flux-resistant type 2: 1 coil latching, Sealed type 3: 2 coil latching, Flux-resistant type 4: 2 coil latching, Sealed type 5: Single side stable, Flux-resistant type 6: Single side stable, Sealed type Auxiliary function 0: Without a test button 1: With a test button Nominal coil voltage (DC) 05: 5 V, 06: 6 V, 12: 12 V, 24: 24 V, 48: 48 V Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB176E 201202-T DJ (ADJ) TYPES 1. Without a test button 1) Flux-resistant type Contact arrangement 1 Form C 1 Form A 1 Form B 1 Form A 1 Form B 2 Form C 2 Form A 2 Form B Nominal coil voltage 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC Single side stable type ADJ15005 ADJ15006 ADJ15012 ADJ15024 ADJ15048 ADJ25005 ADJ25006 ADJ25012 ADJ25024 ADJ25048 ADJ35005 ADJ35006 ADJ35012 ADJ35024 ADJ35048 ADJ45005 ADJ45006 ADJ45012 ADJ45024 ADJ45048 ADJ55005 ADJ55006 ADJ55012 ADJ55024 ADJ55048 ADJ65005 ADJ65006 ADJ65012 ADJ65024 ADJ65048 ADJ75005 ADJ75006 ADJ75012 ADJ75024 ADJ75048 Part No. 1 coil latching type ADJ11005 ADJ11006 ADJ11012 ADJ11024 ADJ11048 ADJ21005 ADJ21006 ADJ21012 ADJ21024 ADJ21048 2 coil latching type ADJ13005 ADJ13006 ADJ13012 ADJ13024 ADJ13048 ADJ23005 ADJ23006 ADJ23012 ADJ23024 ADJ23048 Please use 1 Form A. Please use 1 Form A. ADJ41005 ADJ41006 ADJ41012 ADJ41024 ADJ41048 ADJ51005 ADJ51006 ADJ51012 ADJ51024 ADJ51048 ADJ61005 ADJ61006 ADJ61012 ADJ61024 ADJ61048 ADJ43005 ADJ43006 ADJ43012 ADJ43024 ADJ43048 ADJ53005 ADJ53006 ADJ53012 ADJ53024 ADJ53048 ADJ63005 ADJ63006 ADJ63012 ADJ63024 ADJ63048 Please use 2 Form A. Please use 2 Form A. Standard packing: Carton: 100 pcs.; Case: 500 pcs. ASCTB176E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ DJ (ADJ) 2) Sealed type Contact arrangement 1 Form C 1 Form A 1 Form B 1 Form A 1 Form B 2 Form C 2 Form A 2 Form B Nominal coil voltage 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC Single side stable type ADJ16005 ADJ16006 ADJ16012 ADJ16024 ADJ16048 ADJ26005 ADJ26006 ADJ26012 ADJ26024 ADJ26048 ADJ36005 ADJ36006 ADJ36012 ADJ36024 ADJ36048 ADJ46005 ADJ46006 ADJ46012 ADJ46024 ADJ46048 ADJ56005 ADJ56006 ADJ56012 ADJ56024 ADJ56048 ADJ66005 ADJ66006 ADJ66012 ADJ66024 ADJ66048 ADJ76005 ADJ76006 ADJ76012 ADJ76024 ADJ76048 Part No. 1 coil latching type ADJ12005 ADJ12006 ADJ12012 ADJ12024 ADJ12048 ADJ22005 ADJ22006 ADJ22012 ADJ22024 ADJ22048 2 coil latching type ADJ14005 ADJ14006 ADJ14012 ADJ14024 ADJ14048 ADJ24005 ADJ24006 ADJ24012 ADJ24024 ADJ24048 Please use 1 Form A. Please use 1 Form A. ADJ42005 ADJ42006 ADJ42012 ADJ42024 ADJ42048 ADJ52005 ADJ52006 ADJ52012 ADJ52024 ADJ52048 ADJ62005 ADJ62006 ADJ62012 ADJ62024 ADJ62048 ADJ44005 ADJ44006 ADJ44012 ADJ44024 ADJ44048 ADJ54005 ADJ54006 ADJ54012 ADJ54024 ADJ54048 ADJ64005 ADJ64006 ADJ64012 ADJ64024 ADJ64048 Please use 2 Form A. Please use 2 Form A. Part No. 1 coil latching type ADJ11105 ADJ11106 ADJ11112 ADJ11124 ADJ11148 ADJ21105 ADJ21106 ADJ21112 ADJ21124 ADJ21148 2 coil latching type ADJ13105 ADJ13106 ADJ13112 ADJ13124 ADJ13148 ADJ23105 ADJ23106 ADJ23112 ADJ23124 ADJ23148 Please use 1 Form A. Please use 1 Form A. Standard packing: Carton: 100 pcs.; Case: 500 pcs. 2. With a test button Flux-resistant type Contact arrangement 1 Form C 1 Form A 1 Form B Nominal coil voltage 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC 5V DC 6V DC 12V DC 24V DC 48V DC Single side stable type ADJ15105 ADJ15106 ADJ15112 ADJ15124 ADJ15148 ADJ25105 ADJ25106 ADJ25112 ADJ25124 ADJ25148 ADJ35105 ADJ35106 ADJ35112 ADJ35124 ADJ35148 Standard packing: Carton: 100 pcs.; Case: 500 pcs. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB176E 201202-T DJ (ADJ) RATING 1. Coil data 1) Single side stable Pick-up voltage (at 20°C 68°F) Nominal coil voltage Drop-out voltage (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) Nominal operating power Max. applied voltage (at 20°C 68°F) 75%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) 100Ω 144Ω 576Ω 2,304Ω 9,216Ω 250mW 130%V of nominal voltage Set voltage (at 20°C 68°F) Reset voltage (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) Nominal operating power Max. applied voltage (at 20°C 68°F) 70%V or less of nominal voltage (Initial) 70%V or less of nominal voltage (Initial) 167Ω 240Ω 960Ω 3,840Ω 15,360Ω 150mW 130%V of nominal voltage Set voltage (at 20°C 68°F) Reset voltage (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) Nominal operating power Max. applied voltage (at 20°C 68°F) 70%V or less of nominal voltage (Initial) 100Ω 144Ω 576Ω 2,304Ω 9,216Ω 250mW 130%V of nominal voltage 5V DC 6V DC 12V DC 24V DC 48V DC 2) 1 coil latching Nominal coil voltage 5V DC 6V DC 12V DC 24V DC 48V DC 3) 2 coil latching Nominal coil voltage 5V DC 6V DC 12V DC 24V DC 48V DC 70%V or less of nominal voltage (Initial) 2. Specifications Characteristics Contact Item Arrangement Contact resistance (Initial) Specifications 1 Form C, 1 Form A, 1 Form B, 1 Form A 1 Form B, 2 Form C, 2 Form A, 2 Form B Max. 100 mΩ (By voltage drop 6 V DC 1A) AgSnO2 type (1 Form C, 1 Form A, 1 Form B), Au-flashed AgSnO2 type (1 Form A 1 Form B, 2 Form C, 2 Form A, 2 Form B) Contact material 16 A 250V AC (1 Form C, 1 Form A, 1 Form B), 10 A 250V AC (2 Form C, 2 Form A, 2 Form B, 1 Form A 1 Form B) 4,000 V A 250V AC 16 A (1 Form C, 1 Form A, 1 Form B), 10 A (1 Form A 1 Form B, 2 Form C, 2 Form A, 2 Form B) 150mW (1 coil latching), 250mW (Single side stable, 2 coil latching) 100mA 5 V DC Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section. Nominal switching capacity (resistive load) Rating Max. switching power (resistive load) Max. switching voltage Max. switching current Nominal operating power Min. switching capacity (Reference value)*1 Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Between open contacts Between contact and coil Surge breakdown Between contact and coil voltage*2 (Initial) Temperature rise (coil) (at 70°C 158°F) Operate time [Set time] (at 20°C 68°F) Release time [Reset time] (at 20°C 68°F) Functional Destructive Functional Vibration resistance Destructive Mechanical Shock resistance Mechanical characteristics Expected life Conditions Electrical (Resistive load)*3 (at 20 times/min.) Conditions for operation, transport and storage*4 Unit weight 1,000 Vrms for 1min. (Detection current: 10mA.) 4,000 Vrms for 1min. (Detection current: 10mA.) Min. 10,000 V Max. 55°C (By resistive method, nominal voltage applied to the coil, max. switching current.) Max. 20 ms [20 ms] (Nominal voltage applied to the coil, excluding contact bounce time.) Max. 20 ms [20 ms] (Nominal voltage applied to the coil, excluding contact bounce time.) Min. 200 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.) Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 2 mm (Detection time: 10µs.) 10 to 55 Hz at double amplitude of 3 mm Min. 5×106 (at 180 times/min.) Min. 105 (at 16A 250V AC): 1 Form C, 1 Form A, 1 Form B Min. 105 (at 10A 250V AC): 2 Form C, 2 Form A, 2 Form B, 1 Form A 1 Form B Ambient temperature: –40°C to +70°C –40°F to +158°F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Approx. 14 g .49 oz Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981 *3. In order to obtain the full rated life cycles, the relay should be properly vented by removing the vent nib. More detail, please look at caution for NOTES. *4. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. ASCTB176E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ DJ (ADJ) REFERENCE DATA 1. Max. switching capacity 2. Temperature rise 3. Coil temperature rise Tested sample: ADJ12024, 6 pcs. Coil applied voltage: 0%V, Contact current: 16 A, 20 A Measured portion: Contact, Ambient temperature: 25°C 77°F, 85°C 185°F Tested sample: ADJ56024, 6 pcs. Coil applied voltage: 100%V, 130%V of rating Contact current: 0 A, 10 A Measured portion: Inside the coil, Ambient temperature: Room temperature, 70°C 158°F 40 10 Temperature rise, °C AC resistive load (1-pole) AC resistive load (2-pole) 50 +25°C +85°C 35 Temperature rise, °C Contact current, A 100 30 25 20 15 10 40 10A room temperature 10A 70°C 30 0A room temperature 0A 70°C 20 10 5 0 10 100 0 1,000 0 5 10 15 0 90 25 20 100 110 120 130 5. Ambient temperature characteristics 6. Influence of adjacent mounting Tested sample: ADJ12024, 10 pcs Coil applied voltage: 80%V, 100%V, 120%V of rating Tested sample: ADJ12024, 6pcs Ambient temperature: –40°C to 85°C –40°F to 185°F Tested sample: ADJ12024, 6pcs Ambient temperature: Room temperature 30 Change rate to nominal V, %V Set and Reset time, ms 25 20 15 –60 –40 –20 0 10 20 40 60 80 100 Ambient temperature, °C –10 10 Max. x Min. 5 Set Reset 20 Change rate to nominal V, %V 4. Set and Reset time 30 140 Coil applied voltage, %V Contact current, A Contact voltage, V 5 Set voltage 0 OFF –5 OFF 5 OFF 0 Reset voltage –20 –5 0 70 80 90 100 110 –30 130 120 0 2 4 6 8 10 12 Distance between relays , mm Coil applied voltage, %V DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. 1 Form C, without a test button PC board pattern (Bottom view) External dimensions CAD Data 1.50 dia. 0.59 dia. Single side stable type 1 coil latching type 16.0 .630 3.5 .138 15.24 .600 5.08 .200 29.0 1.142 1.80 .071 5.08 .200 3.50 .138 10.16 .400 13.0 .512 2 coil latching type 5.08 .200 15.24 .600 5.08 .200 5.08 .200 5.08 .200 2 coil latching type only 3.50 .138 Tolerance: ±0.1 ±.004 10.16 .400 13.0 .512 10.16 .400 13.0 .512 General tolerance: ±0.3 ±.012 Schematic (Bottom view) Single side stable type +1 −8 2 4 6 1 coil latching type 2 coil latching type −1 +1 −9 −8 +8 Panasonic Corporation 2 4 6 2 Automation Controls Business Unit 4 6 industrial.panasonic.com/ac/e/ ASCTB176E 201202-T DJ (ADJ) 2. 1 Form C, with a test button PC board pattern (Bottom view) External dimensions CAD Data Single side stable type 1 coil latching type 9.0 .354 6.3 .248 18.2 .717 16.0 .630 2 coil latching type 9.0 .354 3.5 .138 1.50 dia. 0.59 dia. 9.0 .354 3.50 .138 5.08 .200 15.24 .600 5.08 .200 5.08 .200 5.08 .200 3.50 .138 2 coil latching type only Tolerance: ±0.1 ±.004 1.80 .071 15.24 .600 5.08 .200 29.0 1.142 10.16 .400 13.0 .512 10.16 .400 13.0 .512 5.08 .200 10.16 .400 13.0 .512 General tolerance: ±0.3 ±.012 Schematic (Bottom view) Single side stable type +1 2 −8 4 1 coil latching type 2 coil latching type −1 +1 −9 −8 2 +8 6 4 6 2 4 6 3. 1 Form A, without a test button PC board pattern (Bottom view) External dimensions CAD Data 1 coil latching type 2 coil latching type Single side stable type 1 coil latching type 2 coil latching type Single side stable type 1 coil latching type 16.0 .630 3.5 .138 3.50 .138 2 coil latching type 1.50 dia. 0.59 dia. 20.32 .800 5.08 .200 5.08 .200 15.24 .600 5.08 .200 5.08 .200 5.08 .200 10.16 .400 3.50 .138 1.50 dia. 0.59 dia. 2 coil latching type only 15.24 .600 5.08 .200 29.0 1.142 1.80 .071 10.16 .400 13.0 .512 5.08 .200 10.16 .400 13.0 .512 10.16 .400 13.0 .512 Tolerance: ±0.1 ±.004 Single side stable type only General tolerance: ±0.3 ±.012 Schematic (Bottom view) Single side stable type +1 4 −8 1 coil latching type 2 coil latching type −1 +1 −9 −8 2 4 +8 6 2 4 4. 1 Form A, with a test button PC board pattern (Bottom view) External dimensions CAD Data Single side stable type 1 coil latching type 1 coil latching type 2 coil latching type 9.0 .354 6.3 .248 18.2 .717 16.0 .630 9.0 .354 3.5 .138 9.0 .354 3.50 .138 1.50 dia. 0.59 dia. 10.16 .400 3.50 .138 1 coil latching type 2 coil latching type Single side stable type 2 coil latching type 20.32 .800 5.08 .200 1.50 dia. 0.59 dia. 5.08 .200 15.24 .600 5.08 .200 5.08 .200 5.08 .200 2 coil latching type only 1.80 .071 15.24 .600 5.08 .200 29.0 1.142 5.08 .200 10.16 .400 13.0 .512 10.16 .400 13.0 .512 10.16 .400 13.0 .512 Tolerance: ±0.1 ±.004 Single side stable type only General tolerance: ±0.3 ±.012 Schematic (Bottom view) Single side stable type +1 −8 ASCTB176E 201202-T 4 6 1 coil latching type 2 coil latching type −1 +1 −9 −8 2 4 +8 Panasonic Corporation 2 4 Automation Controls Business Unit industrial.panasonic.com/ac/e/ DJ (ADJ) 5. 1 Form B, without a test button PC board pattern (Bottom view) External dimensions CAD Data 1.50 dia. 0.59 dia. 10.16 .400 10.16 .400 Single side stable type Tolerance: ±0.1 ±.004 16.5 .650 0.5 .020 3.5 .138 10.16 .400 13.0 .512 15.24 10.16 .600 .400 29.0 1.142 1.80 .071 15.24 .600 General tolerance: ±0.3 ±.012 Schematic (Bottom view) +1 4 2 −8 6. 1 Form B, with a test button PC board pattern (Bottom view) External dimensions CAD Data 1.50 dia. 0.59 dia. Single side stable type 6.3 .248 Tolerance: ±0.1 ±.004 3.5 .138 10.16 .400 13.0 .512 15.24 10.16 .600 .400 29.0 1.142 1.80 .071 10.16 .400 10.16 .400 9.0 .354 18.2 .717 16.5 .650 0.5 .020 15.24 .600 General tolerance: ±0.3 ±.012 Schematic (Bottom view) +1 4 2 −8 7. 1 Form A 1 Form B, without a test button PC board pattern (Bottom view) External dimensions CAD Data 1.50 dia. 0.59 dia. Single side stable type 16.5 .650 0.5 .020 3.5 .138 1 coil latching type 2 coil latching type 3.5 .138 3.5 .138 5.08 .200 15.24 .600 5.08 .200 5.08 .200 5.08 .200 2 coil latching type only Tolerance: ±0.1 ±.004 15.24 .600 5.08 .200 29.0 1.142 1.80 .071 10.16 .400 13.0 .512 5.08 .200 10.16 .400 13.0 .512 10.16 .400 13.0 .512 General tolerance: ±0.3 ±.012 Schematic (Bottom view) Single side stable type + 1 3 4 1 coil latching type − 3 1 4 + − 8 7 5 8 Panasonic Corporation 7 5 2 coil latching type 3 +1 −9 −8 8 7 Automation Controls Business Unit 4 5 industrial.panasonic.com/ac/e/ ASCTB176E 201202-T DJ (ADJ) 8. 2 Form C, without a test button PC board pattern (Bottom view) External dimensions CAD Data 1.50 dia. 0.59 dia. Single side stable type 16.5 .650 0.5 .020 3.5 .138 1 coil latching type 2 coil latching type 3.5 .138 3.5 .138 5.08 .200 15.24 .600 5.08 .200 5.08 .200 5.08 .200 2 coil latching type only Tolerance: ±0.1 ±.004 15.24 .600 5.08 .200 29.0 1.142 1.80 .071 10.16 .400 13.0 .512 5.08 .200 10.16 .400 13.0 .512 10.16 .400 13.0 .512 General tolerance: ±0.3 ±.012 Schematic (Bottom view) Single side stable type + − 1 2 3 4 8 7 6 5 1 coil latching type − 1 2 3 4 8 7 6 5 2 coil latching type +1 −9 −8 + 2 3 4 7 6 5 9. 2 Form A, without a test button PC board pattern (Bottom view) External dimensions CAD Data 1.50 dia. 0.59 dia. Single side stable type 1 coil latching type 2 coil latching type 3.5 .138 3.5 .138 20.32 .800 5.08 .200 5.08 .200 5.08 .200 2 coil latching type only 16.5 .650 0.5 .020 3.5 .138 20.32 .800 29.0 1.142 1.80 .071 10.16 .400 13.0 .512 10.16 .400 13.0 .512 5.08 .200 Tolerance: ±0.1 ±.004 10.16 .400 13.0 .512 General tolerance: ±0.3 ±.012 Schematic (Bottom view) Single side stable type + 1 3 4 8 6 5 − 1 coil latching type − 1 3 4 8 6 5 2 coil latching type +1 −9 −8 + 3 4 6 5 10. 2 Form B, without a test button PC board pattern (Bottom view) External dimensions CAD Data 1.50 dia. 0.59 dia. Single side stable type 16.5 .650 0.5 .020 1.80 .071 10.16 .400 10.16 .400 Tolerance: ±0.1 ±.004 3.5 .138 15.24 10.16 .600 .400 29.0 1.142 15.24 .600 10.16 .400 13.0 .512 General tolerance: ±0.3 ±.012 Schematic (Bottom view) Single side stable type + 1 2 4 8 7 5 − ASCTB176E 201202-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ DJ (ADJ) SAFETY STANDARDS UL/C-UL (Recognized) Contact rating 16A 277V AC (1 pole), 10A 277V AC (2 poles) File No. E43149 File No. 40009736 VDE (Certified) Contact rating AC 250V 16A (cosφ =1) (1 pole), AC 250V 10A (cosφ =1) (2 poles) * CSA standard: Certified by C-UL NOTES 1. Test button (manual lever) operation The relay contacts switch over as follows: 2-4 terminal 4-6 terminal 2. Electrical life (Sealed type) In order to obtain the full rated life cycles, the relay should be properly vented by removing the vent nib after the soldering/ washing process. Vent nib For Cautions for Use. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB176E 201202-T