BFG92A Vishay Telefunken Silicon NPN Planar RF Transistor Electrostatic sensitive device. Observe precautions for handling. Applications RF amplifier up to GHz range specially for wide band antenna amplifier. Features D High power gain D Low noise figure D High transition frequency 2 1 13 579 94 9279 3 4 BFG92A Marking: P8 Plastic case (SOT 143) 1 = Collector, 2 = Base, 3 = Emitter, 4 = Emitter Absolute Maximum Ratings Tamb = 25_C, unless otherwise specified Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Total power dissipation Junction temperature Storage temperature range Test Conditions Tamb ≤ 60 °C Symbol VCBO VCEO VEBO IC Ptot Tj Tstg Value 20 15 2 30 200 150 –65 to +150 Unit V V V mA mW °C °C Maximum Thermal Resistance Tamb = 25_C, unless otherwise specified Parameter Test Conditions Junction ambient on glass fibre printed board (25 x 20 x 1.5) mm3 plated with 35mm Cu Document Number 85075 Rev. 1, 11-Nov-99 Symbol RthJA Value 450 Unit K/W www.vishay.de • FaxBack +1-408-970-5600 1 (4) BFG92A Vishay Telefunken Electrical DC Characteristics Tamb = 25_C, unless otherwise specified Parameter Collector cut-off current Collector-base cut-off current Emitter-base cut-off current Collector-emitter breakdown voltage Collector-emitter saturation voltage DC forward current transfer ratio Test Conditions VCE = 20 V, VBE = 0 VCB = 15 V, IE = 0 VEB = 2 V, IC = 0 IC = 1 mA, IB = 0 IC = 30 mA, IB = 3 mA VCE = 10 V, IC = 14 mA Symbol Min Typ Max Unit ICES 100 mA ICBO 100 nA IEBO 10 mA V(BR)CEO 15 V VCEsat 0.1 0.4 V hFE 50 100 150 Electrical AC Characteristics Tamb = 25_C, unless otherwise specified Parameter Transition frequency Collector-base capacitance Collector-emitter capacitance Emitter-base capacitance Noise figure Power gain Linear output voltage – two tone intermodulation test Third order intercept point Test Conditions VCE = 10 V, IC = 14 mA, f = 500 MHz VCB = 10 V, f = 1 MHz VCE = 10 V, f = 1 MHz VEB = 0.5 V, f = 1 MHz VCE = 10 V, ZS = 50 W, f = 800 MHz, IC = 2 mA VCE = 10 V, ZL = ZLopt, IC = 14 mA, f = 800 MHz VCE = 10 V, IC = 14 mA, dIM = 60 dB, f1 = 806 MHz, f2 = 810 MHz, ZS = ZL = 50 W VCE = 10 V, IC = 14 mA, f = 800 MHz www.vishay.de • FaxBack +1-408-970-5600 2 (4) Symbol fT Ccb Cce Ceb F Min Typ 6 0.25 0.2 0.7 1.8 Max Unit GHz pF pF pF dB Gpe 17 dB V1 = V2 120 mV IP3 24 dBm Document Number 85075 Rev. 1, 11-Nov-99 BFG92A Vishay Telefunken Dimensions of BFG92A in mm 96 12240 Document Number 85075 Rev. 1, 11-Nov-99 www.vishay.de • FaxBack +1-408-970-5600 3 (4) BFG92A Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 www.vishay.de • FaxBack +1-408-970-5600 4 (4) Document Number 85075 Rev. 1, 11-Nov-99