Kingbright BLB101SURC-E12V 10mm bayonet based led lamp Datasheet

10mm BAYONET BASED LED LAMP
BLB101SURC/E12V
HYPER RED
Features
Description
!BUILT-IN CURRENT LIMITING RESISTOR FOR DIRECT
The Hyper Red source color devices are made with DH
APPLICATION OF DIFFERENT ACROSS CURRENT.
InGaAlP on GaAs substrate Light Emitting Diode.
!LONG LIFE.
! LOW CURRENT, POWER SAVINGS.
!LOW MAINTENANCE.
! DIFFERENT COLOR AVAILABLE.
! SOLID STATE, HIGH VIBRATION RESISTANT.
! 12V
INTERNAL RESISTOR
Package Dimensions
9
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAB2230
APPROVED: J.Lu
REV NO: V.2
CHECKED: Allen Liu
DATE: APR/15/2003
DRAWN: K.ZHANG
PAGE: 1 OF 3
Selection Guide
Par t No .
Dic e
BLB101SURC/E12V
Iv (m c d )
V=12V
L en s Ty p e
HYPER RED (InGaAlP)
WATER CLEAR
V i ew i n g
An g l e
Min .
Ty p .
2θ1/2
650
1800
20 °
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at T)=25°°C
640Sy m b o l
Par am et er
λpeak
Peak Wavelength
Hyper Red
Dominate Wavelength
Hyper Red
630
∆λ1/2
Spectral Line Half-width
Hyper Red
25
IF
Forward Current
Hyper Red
IR
Reverse Current
Hyper Red
D
D ev i c e
Ty p .
Max .
640
21.6
10
Un it s
Tes t Co n d it io n s
nm
VF=12V
nm
VF=12V
nm
VF=12V
mA
VF=12V
uA
V R = 5V
Absolute Maximum Ratings at T)=25°°C
Par am et er
H y p e r R ed
Un it s
270
mW
DC Forward Voltage for 12V
14
V
Reverse Voltage
5
V
Power dissipation for 12V
Operating Temperature
-40°C To +70°C
Storage Temperature
-40°C To +85°C
SPEC NO: DSAB2230
APPROVED: J.Lu
REV NO: V.2
CHECKED: Allen Liu
DATE: APR/15/2003
DRAWN: K.ZHANG
PAGE: 2 OF 3
Hyper Red
SPEC NO: DSAB2230
APPROVED: J.Lu
BLB101SURC/E12V
REV NO: V.2
CHECKED: Allen Liu
DATE: APR/15/2003
DRAWN: K.ZHANG
PAGE: 3 OF 3
Similar pages