CN Series Capacitor Networks (Single-In Line, Low Profile) MERITEK APPICATIONS • • • • • • Personal Computer Floppy Disk Drives OA Machine V.T.R Sequential machine TTL,CMOS,NMOS RMOS Interface circuits SPECIFICATIONS TC ITEM Temperature Coefficient Capacitance Test 25oC Dissipation Factor 25oC Dielectric Strength, 25oC Life Test (1000 hours) Insulation Resistance 25oC Rated Voltage Capacitance Range Tolerance NPO X7R 0 ±30 ppm /oC -55o C to +125o C 1 Vrms max. at 1 KHz (1MHz for 100pF or less) 0.15% max. at 1KHz, 1Vrms (1MHz for 100pF or less) 300% rated voltage for 5 sec. 500mA max. < ±3% at 200% rated voltage, 125o C Z5U ±15% +22%, -56% -55o C to +125o C -55o C to +85o C 1 Vrms max. at 1 Vrms max. at 1KHz 1KHz 2.5% max. at 1KHz, 5% max. at 1 KHz, 1 Vrms max. 1 Vrms max. 250% rated voltage for 5 sec. with 50mA max. charging < ±12.5% at 200% < ±30% at 200% rated voltage, 125o C rated voltage, 85 o C 10,000 M min. DC 25V, 50V, 100V 10pF to 0.15μF ±5% to +80 / -20% PART NUMBERING SYSTEM CN Meritek Series 10 A X 103 K L Number of Pins Dielectric CODE N NPO X X7R Z 25U Capacitance Capacitance expressed in pF. First two digits are significant figures. Third digit denotes number of zeros. EX. 101:100pF 223:22000pF or .022μF 104:100000pF or 0.1μF Tolerance CODE J ± 5% K ±10% M ± 20% L 25V M 50V H 100V Z +80%, -20% Voltage CODE MARKING Pin No. 1 Indicator 10 No. Of Pins A X 103 K Circuit N:NPO X: X7R Z: Z5U Capacitance Code Tolerance Specifications are subject to change without notice. rev.6