600V 30A APT30DQ60B APT30DQ60S APT30DQ60BG* APT30DQ60SG* ® *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE (B) PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • PFC • Avalanche Energy Rated -2 4 7 D3PAK 1 2 • Cooler Operation • Popular TO-247 Package or Surface Mount D3PAK Package • Higher Reliability Systems • Low Forward Voltage • Low Leakage Current TO 2 1 (S) 2 1 • Increased System Power Density 1 - Cathode 2 - Anode Back of Case - Cathode MAXIMUM RATINGS Symbol VR All Ratings: TC = 25°C unless otherwise specified. Characteristic / Test Conditions APT30DQ60B(G)_S(G) UNIT 600 Volts Maximum D.C. Reverse Voltage VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 117°C, Duty Cycle = 0.5) 30 RMS Forward Current (Square wave, 50% duty) 51 IF(RMS) IFSM Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) EAVL Avalanche Energy (1A, 40mH) TJ,TSTG TL Amps 320 20 mJ -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 30A 2.0 2.4 IF = 60A 2.4 IF = 30A, TJ = 125°C 1.7 VR = 600V APT Website - http://www.advancedpower.com Volts 25 VR = 600V, TJ = 125°C 500 36 UNIT µA pF 11-2005 VF Characteristic / Test Conditions 053-4201 Rev B Symbol DYNAMIC CHARACTERISTICS Symbol APT30DQ60B(G)_S(G) Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C Reverse Recovery Time Qrr Reverse Recovery Charge IF = 30A, diF/dt = -200A/µs VR = 400V, TC = 125°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM VR = 400V, TC = 25°C Maximum Reverse Recovery Current trr IRRM IF = 30A, diF/dt = -200A/µs IF = 30A, diF/dt = -1000A/µs VR = 400V, TC = 125°C Maximum Reverse Recovery Current MIN TYP MAX UNIT - 23 - 30 - 55 - 3 - 175 ns - 485 nC - 6 - 75 ns - 855 nC - 22 Amps MIN TYP ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC WT Torque Characteristic / Test Conditions MAX UNIT .80 °C/W Junction-to-Case Thermal Resistance Package Weight 0.22 oz 5.9 g Maximum Mounting Torque 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 0.80 D = 0.9 0.70 0.60 0.7 0.50 Note: 0.5 0.40 0.30 PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.90 0.3 t2 0.20 0 10-5 t Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC SINGLE PULSE 0.1 0.05 0.10 10-4 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION 11-2005 RC MODEL 053-4201 Rev B t1 Junction temp. (°C) 0.560 0.00230 0.240 0.284 Power (watts) Case temperature. (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL TYPICAL PERFORMANCE CURVES 80 TJ = 175°C 60 TJ = 125°C 40 TJ = -55°C 20 TJ = 25°C 0 0.5 1.0 1.5 2.0 2.5 3.0 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Qrr, REVERSE RECOVERY CHARGE (nC) 1200 T = 125°C J V = 400V R 1000 60A 800 30A 600 15A 400 200 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 30A 140 120 100 15A 80 60 40 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 25 T = 125°C J V = 400V 60A R 20 30A 15 10 15A 5 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 60 Qrr Duty cycle = 0.5 T = 175°C J trr 1.0 160 R 0 50 trr 0.8 40 IRRM IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) 1.2 T = 125°C J V = 400V 60A 180 20 IRRM, REVERSE RECOVERY CURRENT (A) 0 APT30DQ60B(G)_S(G) 200 trr, REVERSE RECOVERY TIME (ns) IF, FORWARD CURRENT (A) 100 0.6 0.4 20 Qrr 0.2 0.0 30 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 10 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 180 160 140 120 100 11-2005 80 60 40 20 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-4201 Rev B CJ, JUNCTION CAPACITANCE (pF) 200 APT30DQ60B(G)_S(G) Vr diF /dt Adjust +18V APT30GT60BR 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 0.25 IRRM 3 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions 3 D PAK Package Outline TO-247 Package Outline e1 SAC: Tin, Silver, Copper 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 20.80 (.819) 21.46 (.845) Cathode 11-2005 053-4201 Rev B 5.38 (.212) 6.20 (.244) Cathode (Heat Sink) 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) e3 100% Sn 0.40 (.016) 0.65 (.026) 4.50 (.177) Max. 19.81 (.780) 20.32 (.800) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 1.00 (.039) 1.15(.045) 13.30 (.524) 13.60(.535) 12.40 (.488) 12.70 (.500) 18.70 (.736) 19.10 (.752) 3.50 (.138) 3.81 (.150) 0.40 (.016) 0.79 (.031) 15.85 (.624) 16.05(.632) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.) Anode 2.21 (.087) 2.59 (.102) Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches) Anode Cathode Dimensions in Millimeters (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. 2.40 (.094) 2.70 (.106) (Base of Lead) Heat Sink (Cathode) and Leads are Plated