DeviceNet Micro-Style Connectors CM02 Series Conforming Standard DeviceNet ◆ OUTLINE The CM02 series is a Micro-style connector for Wa t e r p r o o f IP 67 use in a DeviceNet communication network. These products provide connections between simple industrial devices such as sensor, actuators and higher-level devices such as controllers. This connector system is also recommended for CCLink network and can be used in harsh environmental conditions, having IP67 rated for protection against moisture, oil and dust. ◆ FEATURES ・Crimp termination for the cable mount plugs and jacks ・Receptacle : Soldering Lock Type ・Protection from wiring errors by color-coding the contact holder with red, white, blue and black Threaded Coupling ・Available style are cable mount plug with socket contacts, cable mount jack with pin contacts, T tap, panel mount receptacle with pin contacts, panel mount plug receptacle with socket contacts, terminating resistor and dust cap ◆ SPECIFICATIONS Rated Current 3A/contact Rated Voltage 24V DC Dielectric Withstanding Voltage 500V AC(r.m.s) for 1 minute Insulation Resistance 1000M Ω min. at 250V DC Operating Temperature Range - 40℃ to +85℃ Waterproof IP67 when mated No. of Contacts 5 Physical Configuration of Cables For Example Jacket ＤＣ Power Insulation Color：Black Conductor Braid Shield Data Insulation Colors : Blue & Yellow Ground Insulation Color : White AL / MY Shield Data Insulation Color：White AL / MY Shield Data Insulation Color：Blue AL / MY Shield Braid Shield Jacket Drain Wire ＤＣ Power Insulation Color：Red DeviceNet Thick Cable ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. 090206 http://www.ddknet.co.jp Drain Wire CC-Link Cable RoHS MATERIAL/FINISH Item Compliant Compliant Plug (With Socket Contacts) Jack (With Pin Contacts) Resistor (With Pin or Socket Contacts) Insulator Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Contact Copper Alloy/Gold Plating Copper Alloy/Gold Plating Copper Alloy/Gold Plating Coupling Ring Copper Alloy/Nickel Plating Copper Alloy/Gold Plating Copper Alloy/Gold Plating Backshell Nut Aluminum Alloy/Black Aluminum Alloy/Black Aluminum Alloy/Black Contact Holder Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Backshell Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Clamp Nut Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black O-Ring Synthetic Rubber/Black Synthetic Rubber/Black Gasket Synthetic Rubber/Black Bushing Synthetic Rubber/Black Item T Synthetic Rubber/Black Synthetic Rubber/Black for Socket Synthetic Rubber/Black Tap Receptacle Plug Receptacle (With Pin Contacts) (With Socket Contacts) Insulator Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Plastic(UL94V-0)/Black Contact Copper Alloy/Gold Plating Copper Alloy/Gold Plating Copper Alloy/Gold Plating Coupling Ring Zinc Alloy/Nickel Plating Shell Copper Alloy/Nickel Plating Zinc Alloy/Nickel Plating Nut Washer Copper Alloy/Nickel Plating Copper Alloy/Nickel Plating Gasket(Mating Side) Synthetic Rubber/Black Gasket(Mounting Side) Overmolding Resin Synthetic Rubber/Black Synthetic Rubber/Black Synthetic Rubber/Black Plastic(UL94V-0)/Black CRIMP TOOL ・For DeviceNet Plug and Jack the straight plug and the straight jack. Two kinds A set of crimp tool for straight contacts of crimp tools are needed since a connector has a straight contact and angle contacts of which style Hand Tool Contents Locator are different. However the locater can be removed and you can use one hand tool for termination if Conductor Size Item Highly reliable crimp termination can be made for Inspection Gauge 2 A set of crimp tool for angle contacts you have two locators each for the straight contact Hand Tool and the angle contacts. Locator Contents (4) angle contacts and the style of contact is only Contents one. It is feasible for you to terminate the cable to 357J-17917 357J-12610 357J-12610 357J-18918 357J-18918 357J-19779-2 357J-17900-2 357J-19812 357J-17898 357J-12610 357J-12610 357J-17899 357J-17899 357J-19779-1 357J-17900-1 Inspection Gauge 2 357J-19779-2 357J-17900-2 Conductor Size AWG 18-AWG 20 A set of crimp tool for angle contacts The connectors for CC-Link network will have four AWG 18 - AWG 20 357J-19811 Inspection Gauge 1 Item ・For CC-Link Plug and Jack AWG 22 - AWG 24 357J-21598 Hand Tool 357J-12610 Locator 357J-17899 Inspection Gauge 2 357J-17900-2 the contacts by one kind of the crimp tool for angle contacts. ◆ CONFIGURATION OF CONTACTS Straight Pin Contact 30.85 Angle Pin Contact Straight Socket Contact 25.9 29.35 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 Angle Socket Contact 24.4 CM02 Series Unit：mm ○ Straight Plug With Socket Contacts ・DeviceNet Plug A set of plug consists of 1 body, 1 straight contact and 4 angle contacts Applicable Cable P/N Conductor Size Outside Dia. AWG22 - AWG24 φ 6.5mm - φ 7.2mm AWG22 - AWG24 φ 8.8mm - φ 9.8mm AWG18 - AWG20 φ 6.5mm - φ 7.2mm AWG18 - AWG20 φ 8.2mm - φ 8.9mm AWG18 - AWG20 φ 9.4mm - φ 9.9mm A set of plug : CM02A-8DP5S-D(02) Body : CM02A-8DP5S-D(02)-0 Contents Straight Contact : CM02A-SSC-2224 Angle Contact : CM02A-ASC-2224 A set of plug : CM02A-8DP5S-D(04) Body : CM02A-8DP5S-D(04)-0 Contents Straight Contact : CM02A-SSC-2224 Angle Contact : CM02A-ASC-2224 A set of plug : CM02A-8DP5S-D(02)(D9) Body : CM02A-8DP5S(02)(D9)-0 Contents Straight Contact : CM02A-SSC-1820 Angle Contact : CM02A-ASC-1820 A set of plug : CM02A-8DP5S-D Body : CM02A-8DP5S-D-0 Contents Straight Contact : CM02A-SSC-1820 Angle Contact : CM02A-ASC-1820 A set of plug : CM02A-8DP5S-D(01) Body : CM02A-8DP5S-D(01)-0 Contents Straight Contact : CM02A-SSC-1820 Angle Contact : CM02A-ASC-1820 A soldering style is also available. P/N : CM02A-8DP5S-D(02)(D4) Applicable Cable : AWG16 max. conductor size φ 6.5mm - φ 7.2mm outside dia. ・CC-Link Plug A set of plug consists of 1 body and 4 angle contacts Applicable Cable P/N Conductor Size Outside Dia. A set of plug : CM02A-8DP5S-D(03) Contents Body : CM02A-8DP5S-D(03)-0 AWG18 - AWG20 φ 7.2mm - φ 7.9mm Angle Contact : CM02A-ASC-1820 54 M12×1 Thread φ23.6 φ8.1 φ21 A A （Contact No.1） Red White （Contact No.2） Black Blue （Contact No.5） Section Ａ−Ａ ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 （Contact No.4） （Contact No.3） CM02 Series Unit：mm ○ Straight Jack With Pin Contacts ・DeviceNet Jack A set of Jack consists of 1 body, 1 straight contact and 4 angle contacts Applicable Cable P/N Conductor Size Outside Dia. AWG22 - AWG24 φ 6.5mm - φ 7.2mm AWG22 - AWG24 φ 8.8mm - φ 9.8mm AWG18 - AWG20 φ 6.5mm - φ 7.2mm AWG18 - AWG20 φ 8.2mm - φ 8.9mm AWG18 - AWG20 φ 9.4mm - φ 9.9mm A set of Jack : CM02A-8DJ5P-D(02) Body : CM02A-8DJ5P-D(02)-0 Contents Straight Contact : CM02A-SPC-2224 Angle Contact : CM02A-APC-2224 A set of Jack : CM02A-8DJ5P-D(04) Body : CM02A-8DJ5P-D(04)-0 Contents Straight Contact : CM02A-SPC-2224 Angle Contact : CM02A-APC-2224 A set of Jack : CM02A-8DJ5P-D(02)(D9) Body : CM02A-8DJ5P-D(02)(D9)-0 Contents Straight Contact : CM02A-SPC-1820 Angle Contact : CM02A-APC-1820 A set of Jack : CM02A-8DJ5P-D Body : CM02A-8DJ5P-D-0 Contents Straight Contact : CM02A-SPC-1820 Angle Contact : CM02A-APC-1820 A set of Jack : CM02A-8DJ5P-D(01) Body : CM02A-8DJ5P-D(01)-0 Contents Straight Contact : CM02A-SPC-1820 Angle Contact : CM02A-SPC-1820 A soldering style is also available. P/N : CM02A-8DJ5P-D(02)(D4) Applicable Cable : AWG16 max. conductor size. φ 6.5mm - φ 7.2mm outside dia. ・CC-Link Jack A set of Jack consists of 1 body and 4 angle contacts Applicable Cable P/N Conductor Size Outside Dia. A set of plug : CM02A-8DJ5P-D(03) AWG 18 - AWG 20 Body : CM02A-8DJ5P-D(03)-0 Contents φ 7.2mm - φ 7.9mm Angle Contact : CM02A-APC-1820 58 M12×1 Thread φ21 φ23.6 A A （Contact No.1） White Red （Contact No.4） （Contact No.2） Blue Black （Contact No.5） （Contact No.3） SectionＡ−Ａ ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 CM02 Series Unit：mm ○ “ Ｔ ”Tap P/N : CM02-8D2TA5-CF φ4.5 17 15 23.6 18.4 10.2 φ7.8 2.5 31.5 φ14 φ14 16.8 5.7 2.5 ＪＡＰＡＮ Jack （Pin） 15 Plug （Socket） Plug （Socket） ○ Terminating Resistor With Pin Contacts ・Terminated between No. 4 and No. 5 with resistor, 121 ohm,1/4 watt. P/N : CM02B-8DER5P M12×1 Thread 121Ω φ15 1 NC 2 NC 3 NC 4 5 43 Wiring Diagram ○ Terminating Resistor With Socket Contacts ・Terminated between No. 4 and No. 5 with resistor, 121 ohm,1/4 watt. P/N：CM02B-8DER5S M12×1 Thread 121Ω φ15 φ8.1 1 NC 2 NC 3 NC 4 5 40 Wiring Diagram ○ Receptacle with Plastic Shell and Pin Contacts, Type 1 P/N : CM02-8DR5P-CF 23 M12×1 Thread 17 ２ φ1 ３ ３ Max. (Panel Thickness) M14×0.75 Thread 40 13.1 0 17 ４ +0.1 +0.1 １ φ19.6 13.1 ・P C B Contacts ・Rear-mount configuration ・Applicable wire size : AWG22 max. Mounting Hole ○ Receptacle with Plastic Shell and Pin Contacts, Type 2 P/N : CM02-8DR5P-CF(D5) ・P C B Contacts ・Rear-mount configuration ・Applicable wire size : AWG22 max. 19.4 .6 19 17 (13) 17 ４ +0.1 0 ２ ３ M12 1 Thread M14 0.75 Thread ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 (2.7) ３ Max. (Panel Thickness) 4 φ1 +0.1 13.1 0 φ １ Mounting Hole CM02 Series Unit：mm ○ Receptacle with Plastic Shell and Pin Contacts P/N : CM02-8DR5PD(D1)-FG φ14 12.2 ・P C B Contacts ・Rear-mount configuration 6 1 +0.1 0 +0.1 0 Board Thickness 1.6 ±0.2 Coding Pin φ1.4 5.9 1.5 M12×1 Thread 9 No Printed Area 19.6 3.5 2.5 5-φ１ M14×0.75 Thread 5 φ1 23.4 2.5 17 17 φ8.3 12 ３ ５ ２ ４ １ Panel Mounting Hole 3 Max.（Panel Thickness） 2.5 φ1.6± 2.5 5° 4 Board Mounting Hole ○ Plug Receptacle with Metal Shell and Socket Contacts P/N : CM02-8DPR5S-CF 15.8 ４ ３ 1 4 3 21.9 φ20 １ ２ φ13.7 ・Applicable wire size : AWG22 max. +0.1 15.1 0 M12×1 Thread ・Rear-mount configuration 2 φ16 +0.1 0 19 M16×1 Thread Mounting Hole ○ Plug Insert Assembly with Socket Contacts for PCB Mount 3. 2 45 ° 2.5 Coding Pin φ1.4 2.5 ° 45 φ1.6 ±0.1 φ10.5 5-φ１ 2.5 φ8.1 ３ １ ４ ５ ・P C B Contacts ・No shell ２ 3.5 2.5 P/N : CM02-8DP5SD(D1)-FG 3.2 10 15 Board Mounting Hole ○ Receptacle Cap PVC Cap for Receptacle P/N：CM01-CAP Metal Cap for Receptacle Metal Cap for Receptacle P/N : CM01-R-CAP-CF P/N：CM01-R-CAP(D1) Non-Waterproof type Waterproof type Waterproof type Material : PVC/Black Material/Finish : Copper Alloy/Nickel Plating Material/Finish：Aluminum Alloy/Anodic Coatings 18 φ14 φ14 φ16 φ11.5 13 13 100 .2 φ3 straight knurl ○ Plug Cap φ14 Metal Cap for Plug P/N : CM01-P-CAP-CF Waterproof type Material/Finish : Copper Alloy/Nickel Plating 8.7 14.3 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 6